Date: Mon, 8 Jan 2001 15:39:39 -0500 From: "Robert Myers" <ccrider@whiterose.net> To: <guli1@email.cz>, <freebsd-questions@FreeBSD.ORG> Subject: RE: Aopen + Intel PLC 10/100 (82562ET/EM) Message-ID: <000101c079ce$83e6aa90$0201a8c0@ccrider2k> In-Reply-To: <3A59240A.000001.26112@www2.email.atc>
next in thread | previous in thread | raw e-mail | index | archive | help
> I have problem with our new server with FreeBSD 4.2 > > It runs on Aopen MX3S board with integrated Intel ethernet chip and > Adaptec SCSI Disk Controller > > booting info: > ahc0: <Adaptec 29160N Ultra160 SCSI adapter> port > 0xc000-0xc0ff mem 0xd5000000-0xd5000fff > irq 11 at device 4.0 on pci1 > aic7892: Wide Channel A, SCSI Id=7, 32/255 SCBs > fxp0: <Intel PLC 10/100 Ethernet> port 0xc400-0xc43f mem > 0xd5001000-0xd5001fff > irq 10 at device 8.0 on pci1 > > info from Aopen site: > > On Board LAN: ICH2 Integrated MAC+ Intel 82562ET/EM PHY > onboard for 10/100Mbps > Ethernet > > Sometimes kernel return this messages ... > > Dec 31 02:02:13 kiwi /kernel: fxp0: SCB timeout > Dec 31 02:02:28 kiwi last message repeated 4 times > Dec 31 02:02:33 kiwi /kernel: fxp0: device timeout > > and server is not reachable by ethernet card for 1-5 min > sometimes longer Does this only happen on bootup? Or when you make a change to the ip address info? Or perhpas when you walk over or around the cabling? I would at a minimum, check the cable, to see that it is good, replace all of it, patch cables and have any lengths tested between patch panels and such. Good Luck. Robert Myers Systems Administrator http://whiterose.net (717)439-1478 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?000101c079ce$83e6aa90$0201a8c0>