Date: Sat, 2 Jan 1999 00:47:16 -0500 From: User & Ian Patrick Thomas <ipthomas_77@yahoo.com> To: Cuyler Dingwell <cuyler@home.com> Cc: freebsd-questions@freebsd.org Subject: Re: ata100 hard drive Message-ID: <19990102004716.A363@localhost> In-Reply-To: <3B606557.8090201@home.com>; from cuyler@home.com on Thu, Jul 26, 2001 at 02:45:43PM -0400 References: <3B606557.8090201@home.com>
next in thread | previous in thread | raw e-mail | index | archive | help
As it was put forth by Cuyler Dingwell on Thu, Jul 26, 2001 at 02:45:43PM -0400...
> Hello,
>
> I'm currently running FreeBSD 4.1 and attenpting to install a ata100
> (Quantum) hard disk. I am unable to find anything online to help me in
> such a task. The drive does not show up in the dmesg.boot log file
> however the bios does see it on boot up as drive 1 on the ata100
> controller (on-board).
>
> If anyone has any hints please let me know either in the mailing list
> or at cuyler@home.com
>
> Thanks.
>
> - Cuyler
>
>
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-questions" in the body of the message
These are the controllers that 4.x stable supports as per the man ata
Acerlabs Aladdin Ultra DMA 33 (UDMA2), 33 MB/sec
AMD 756 Ultra DMA 66 (UDMA4), 66 MB/sec
CMD 646 DMA 2 (WDMA2), 16 MB/sec
CMD 648 Ultra DMA 66 (UDMA4), 66 MB/sec
CMD 649 Ultra DMA 100 (UDMA5), 100 MB/sec
Cypress 82C693 DMA 2 (WDMA2), 16 MB/sec
HighPoint HPT366 Ultra DMA 66 (UDMA4), 66 MB/sec
HighPoint HPT370 Ultra DMA 100 (UDMA5), 100 MB/sec
Intel PIIX DMA 2 (WDMA2), 16 MB/sec
Intel PIIX3 DMA 2 (WDMA2), 16 MB/sec
Intel PIIX4 Ultra DMA 33 (UDMA2), 33 MB/sec
Intel ICH0 Ultra DMA 33 (UDMA2), 33 MB/sec
Intel ICH Ultra DMA 66 (UDMA4), 66 MB/sec
Intel ICH2 Ultra DMA 100 (UDMA5), 100 MB/sec
Promise Ultra/Fasttrak-33 Ultra DMA 33 (UDMA2), 33 MB/sec
Promise Ultra/Fasttrak-66
Promise Ultra/Fasttrak-100 Ultra DMA 100 (UDMA5), 100 MB/sec
ServerWorks ROSB4 Ultra DMA 33 (UDMA2), 33 MB/sec
SiS 5591 Ultra DMA 33 (UDMA2), 33 MB/sec
Cyrix 5530 Ultra DMA 33 (UDMA2), 33 MB/sec
VIA 82C586 Ultra DMA 33 (UDMA2), 33 MB/sec
VIA 82C686a Ultra DMA 66 (UDMA4), 66 MB/sec
VIA 82C686b Ultra DMA 100 (UDMA5), 100 MB/sec
If yours is listed here then try grabbing an iso of 4.3, the boot
floppies for an ftp install, or install the Quantum on another controller
with 4.1, cvsup to 4.x Stable or 4.3, and move the drive to the new
controller. I just did close to this, I moved my UDMA 33 system to a new
drive on the UDMA 66 controller. Good luck.
Ian
p.s. also check here for your controller
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/install-hw.html
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19990102004716.A363>