Date: Thu, 25 Oct 2001 13:29:02 -0500 (CDT) From: Scott Klement <klemscot@klements.com> To: Arjan Knepper <arjan@jak.nl> Cc: <bde@zeta.org.au>, <freebsd-bugs@freebsd.org> Subject: Re: i386/30965: Cyclades Cyclom-Yep causes FreeBSD to hang during Message-ID: <20011025131625.N9793-100000@gateway.klements.com> In-Reply-To: <3BD7D31F.6050006@jak.nl>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, 25 Oct 2001, Arjan Knepper wrote:
>
> I have the same kind of trouble, are you using 1 cy board?
Yes -- just one board in this PC. (We have 4 boards, but each one is
in a PC by itself)
> Already tried the -CURRENT, dind't help me.
>
I updated (via cvsup) to -CURRENT on Monday.
It didn't solve the problem on my system, but did change the symptoms
somewhat. Now, FreeBSD doesn't lock during boot -- but the Cyclades
board still doesn't work, the ports simply don't respond, and I can't
exit tip (it just stops responding)
> BTW Linux redhat 7.1 runs just fine on this system with 3 Cyclades PCI
> boards.
Same here, with one board. :(
Here's the dmesg for boot -v and the output of pciconf -lv on -CURRENT:
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #1: Mon Oct 22 14:59:10 CDT 2001
klemscot@bcserv2.klements.com:/usr/src/sys/i386/compile/BCSERV
Calibrating clock(s) ... TSC clock: 897231483 Hz, i8254 clock: 1193127 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
Timecounter "TSC" frequency 897279088 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (897.28-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x68a Stepping = 10
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 64974848 (63452K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009ffff, 651264 bytes (159 pages)
0x00401000 - 0x03deefff, 60743680 bytes (14830 pages)
avail memory = 59338752 (57948K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00ffe80
bios32: Entry = 0xffe90 (c00ffe90) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xbfee
pnpbios: Found PnP BIOS data at 0xc00fe2d0
pnpbios: Entry = f0000:e2f4 Rev = 1.0
Other BIOS signatures found:
Preloaded elf kernel "/boot/kernel/kernel" at 0xc03da000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc03da0b4.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc03da104.
null: <null device, zero device>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
random: <entropy source>
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000050
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=11308086)
Using $PIR table, 11 entries at 0xc00fbb40
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <DELL GX150 > on motherboard
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI" frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu: CLK_VAL field overflows P_CNT register
acpi_cpu: CLK_VAL field overlaps THT_EN bit
acpi_button0: <Power Button> on acpi0
acpi_pcib0: <Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: physical bus=0
found-> vendor=0x8086, dev=0x1130, revid=0x04
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
map[10]: type 3, range 32, base f8000000, size 26, enabled
map[14]: type 1, range 32, base ff000000, size 19, enabled
found-> vendor=0x8086, dev=0x1132, revid=0x04
bus=0, slot=2, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
intpin=a, irq=9
powerspec 2 supports D0 D3 current D0
found-> vendor=0x8086, dev=0x244e, revid=0x11
bus=0, slot=30, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
found-> vendor=0x8086, dev=0x2440, revid=0x11
bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
map[20]: type 4, range 32, base 0000ffa0, size 4, enabled
found-> vendor=0x8086, dev=0x244b, revid=0x11
bus=0, slot=31, func=1
class=01-01-80, hdrtype=0x00, mfdev=0
map[20]: type 4, range 32, base 0000dcd0, size 4, enabled
found-> vendor=0x8086, dev=0x2443, revid=0x11
bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
intpin=b, irq=10
pci0: <PCI bus> on acpi_pcib0
pci0: <display, VGA> at device 2.0 (no driver attached)
pcib1: <PCI-PCI bridge> at device 30.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xe000-0xefff
pcib1: memory decode 0xfd000000-0xfeffffff
pcib1: prefetched decode 0xfff00000-0xfffff
pci1: physical bus=1
map[10]: type 1, range 32, base fdfffc00, size 7, enabled
map[14]: type 4, range 32, base 0000ec80, size 7, enabled
map[18]: type 1, range 32, base fdff8000, size 14, enabled
found-> vendor=0x120e, dev=0x0101, revid=0x01
bus=1, slot=9, func=0
class=07-80-00, hdrtype=0x00, mfdev=0
intpin=a, irq=3
pci1: <PCI bus> on pcib1
cy0: <Cyclades Cyclom-Y Serial Adapter> port 0xec80-0xecff mem 0xfdff8000-0xfdffbfff,0xfdfffc00-0xfdfffc7f irq 3 at device 9.0 on pci1
pcib1: device cy0 requested decoded I/O range 0xec80-0xecff
pcib1: device cy0 requested decoded memory range 0xfdff8000-0xfdffbfff
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 ATA100 controller> port 0xffa0-0xffaf at device 31.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xffa0
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI probe 00 00
ata0-slave: ATAPI probe 00 00
ata0: mask=03 stat0=50 stat1=00
ata0-master: ATA probe 01 a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xffa8
ata1: mask=03 ostat0=00 ostat2=00
ata1-master: ATAPI probe 14 eb
ata1-slave: ATAPI probe 7f 7f
ata1: mask=03 stat0=00 stat1=00
ata1: devices=04
ata1: at 0x170 irq 15 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
fdc0: <NEC 72065B or clone> port 0x3f7,0x3f0-0x3f5 irq 6 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x1d0000
psm0: unable to allocate IRQ
psmcpnp0 irq 12 on acpi0
psm0: current command byte:0065
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
psm: status 00 02 64
psm: status 90 02 3c
psm: status 90 02 3c
psm: status 90 02 3c
psm: data 08 00 00
psm: status 00 00 28
psm: status 00 02 64
psm: data 08 00 00
psm: status 00 02 64
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
sio0: irq maps: 0x9 0x19 0x9 0x9
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A, console
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: irq maps: 0x9 0x9 0x9 0x9
sio1: probe failed test(s): 0 1 2 4 6 7 9
ppc0: using extended I/O port range
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: irq maps: 0x9 0x9 0x9 0x9
sio1: probe failed test(s): 0 1 2 4 6 7 9
ppc0: using extended I/O port range
ata-: ata0 already exists, using ata2 instead
ata-: ata1 already exists, using ata3 instead
atkbdc-: atkbdc0 already exists, using atkbdc1 instead
cy-: cy0 already exists, using cy1 instead
fdc-: fdc0 already exists, using fdc1 instead
sio-: sio0 already exists, using sio1 instead
sio-: sio1 already exists, using sio2 instead
sio-: sio2 already exists, using sio3 instead
sio-: sio3 already exists, using sio4 instead
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc-: sc0 already exists, using sc1 instead
vga-: vga0 already exists, using vga1 instead
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xc0000-0xc9fff,0xca000-0xcbfff on isa0
adv0 failed to probe on isa0
aha0 failed to probe on isa0
aic0 failed to probe on isa0
ata2 failed to probe at port 0x1f0 irq 14 on isa0
ata3 failed to probe at port 0x170 irq 15 on isa0
atkbdc1: <Keyboard controller (i8042)> failed to probe at port 0x60 on isa0
bt0 failed to probe on isa0
cs0 failed to probe at port 0x300 on isa0
cy1 failed to probe at iomem 0xd4000-0xd5fff irq 10 on isa0
ed0 failed to probe at port 0x280 iomem 0xd8000 irq 10 on isa0
fdc1: cannot reserve I/O port range (6 ports)
fdc1 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
fe0 failed to probe at port 0x300 on isa0
ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0
le0 failed to probe at port 0x300 iomem 0xd0000 irq 5 on isa0
lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
pmtimer0 on isa0
ppc0: parallel port not found.
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio1 failed to probe at port 0x3f8 irq 4 flags 0x10 on isa0
sio2: configured irq 3 not in bitmap of probed irqs 0
sio2: irq maps: 0x9 0x9 0x9 0x9
sio2: probe failed test(s): 0 1 2 4 6 7 9
sio2 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio3: not probed (disabled)
sio4: not probed (disabled)
sn0 failed to probe at port 0x300 irq 10 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 a0 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0 failed to probe on isa0
sc1: no video adapter found.
sc1: <System console> failed to probe on isa0
vga1: <Generic ISA VGA> failed to probe on isa0
isa_probe_children: probing PnP devices
BIOS Geometries:
0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
bpf: lo0 attached
bpf: ppp0 attached
ad0: success setting UDMA5 on Intel chip
Creating DISK ad0
ad0: <Maxtor 5T020H2/TAH71DP0> ATA-6 disk at ata0-master
ad0: 19073MB (39062500 sectors), 38752 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
ad0: piomode=4 dmamode=2 udmamode=5 cblid=1
ata1-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1
ata1-master: success setting PIO4 on generic chip
acd0: <SAMSUNG CD-ROM SC-148C/C002> CDROM drive at ata1 as master
acd0: read 171KB/s (32KB/s), 128KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, packet
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
Mounting root from ufs:/dev/ad0s1a
ad0s1: type 0xa5, start 63, end = 610469, size 610407 : OK
ad0s2: type 0x83, start 610470, end = 722924, size 112455 : OK
ad0s3: type 0xa5, start 1220940, end = 17591174, size 16370235 : OK
ad0s4: type 0x5, start 17591175, end = 39054014, size 21462840
ad0s4: C/H/S start 1023/0/1 (16434495) != start 17591175: invalid
ad0s5: type 0x83, start 17591238, end = 25993169, size 8401932
ad0s5: C/H/S start 1023/1/1 (16434558) != start 17591238: invalid
ad0<extended>: type 0x5, start 25993170, end = 27053459, size 1060290
ad0<extended>: C/H/S start 1023/0/1 (16434495) != start 25993170: invalid
ad0s6: type 0x82, start 25993233, end = 27053459, size 1060227
ad0s6: C/H/S start 1023/1/1 (16434558) != start 25993233: invalid
ad0<extended>: type 0x5, start 27053460, end = 27679994, size 626535
ad0<extended>: C/H/S start 1023/0/1 (16434495) != start 27053460: invalid
ad0s7: type 0x83, start 27053523, end = 27679994, size 626472
ad0s7: C/H/S start 1023/1/1 (16434558) != start 27053523: invalid
ad0<extended>: type 0x5, start 27679995, end = 28210139, size 530145
ad0<extended>: C/H/S start 1023/0/1 (16434495) != start 27679995: invalid
ad0s8: type 0x83, start 27680058, end = 28210139, size 530082
ad0s8: C/H/S start 1023/1/1 (16434558) != start 27680058: invalid
ad0<extended>: type 0x5, start 28210140, end = 39054014, size 10843875
ad0<extended>: C/H/S start 1023/0/1 (16434495) != start 28210140: invalid
ad0s9: type 0x83, start 28210203, end = 39054014, size 10843812
ad0s9: C/H/S start 1023/1/1 (16434558) != start 28210203: invalid
start_init: trying /sbin/init
Entropy harvesting: interrupts ethernet point_to_point.
swapon: adding /dev/ad0s3b as swap device
Automatic boot in progress...
/dev/ad0s1a: FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s1a: clean, 237286 free (430 frags, 29607 blocks, 0.1% fragmentation)
/dev/ad0s3f: FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s3f: clean, 5803225 free (26809 frags, 722052 blocks, 0.4% fragmentation)
/dev/ad0s3e: FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s3e: clean, 297328 free (72 frags, 37157 blocks, 0.0% fragmentation)
Doing initial network setup:
Warning: /etc/host.conf is no longer used
/etc/nsswitch.conf will be used instead
hostname.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
inet 127.0.0.1 netmask 0xff000000
Additional routing options: tcp extensions=NO TCP keepalive=YES.
Routing daemons:.
Additional daemons: syslogd.
Doing additional network setup:.
Starting final network daemons:.
ELF ldconfig path: /usr/lib /usr/lib/compat /usr/local/lib
a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout
Starting standard daemons: cron printer sshd sendmail.
Initial rc.i386 initialization:.
Configuring syscons: blanktime.
Additional ABI support:.
Local package initialization:.
Additional TCP options:.
Starting background filesystem checks
Mon Oct 22 16:30:09 CDT 2001
hostb0@pci0:0:0: class=0x060000 card=0x00be1028 chip=0x11308086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '82815/82815EM/EP Host-Hub Interface Bridge / DRAM Ctrlr'
class = bridge
subclass = HOST-PCI
none0@pci0:2:0: class=0x030000 card=0x00be1028 chip=0x11328086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '82815 Internal Graphics Device'
class = display
subclass = VGA
pcib1@pci0:30:0: class=0x060400 card=0x00000000 chip=0x244e8086 rev=0x11 hdr=0x01
vendor = 'Intel Corporation'
device = '82801BA Hub Interface to PCI Bridge'
class = bridge
subclass = PCI-PCI
isab0@pci0:31:0: class=0x060100 card=0x00000000 chip=0x24408086 rev=0x11 hdr=0x00
vendor = 'Intel Corporation'
device = '82801BA LPC Interface Bridge'
class = bridge
subclass = PCI-ISA
atapci0@pci0:31:1: class=0x010180 card=0x00000000 chip=0x244b8086 rev=0x11 hdr=0x00
vendor = 'Intel Corporation'
device = '82801BA IDE Controller'
class = mass storage
subclass = ATA
none1@pci0:31:3: class=0x0c0500 card=0x00000000 chip=0x24438086 rev=0x11 hdr=0x00
vendor = 'Intel Corporation'
device = '82801BA/BAM SMBus Controller'
cass = serial bus
subclass = SMBus
cy0@pci1:9:0: class=0x078000 card=0x0100120e chip=0x0101120e rev=0x01 hdr=0x00
vendor = 'Cyclades Corporation'
device = 'Cyclom-Y Multiport Serial Card'
class = simple comms
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20011025131625.N9793-100000>