Date: Fri, 11 Jan 2002 20:25:29 -0500 From: Leo Bicknell <bicknell@ufp.org> To: Terry Lambert <tlambert2@mindspring.com> Cc: Lyndon Nerenberg <lyndon@atg.aciworldwide.com>, John Baldwin <jhb@FreeBSD.ORG>, freebsd-hackers@FreeBSD.ORG, Alfred Perlstein <bright@mu.org> Subject: Re: serial console + boot blip Message-ID: <20020112012529.GA47286@ussenterprise.ufp.org> In-Reply-To: <3C3F3E1D.F23F9BD7@mindspring.com> References: <bicknell@ufp.org> <20020111042439.GA24433@ussenterprise.ufp.org> <200201111648.g0BGmA2I047791@atg.aciworldwide.com> <20020111165416.GA36184@ussenterprise.ufp.org> <3C3F3E1D.F23F9BD7@mindspring.com>
next in thread | previous in thread | raw e-mail | index | archive | help
In a message written on Fri, Jan 11, 2002 at 11:33:49AM -0800, Terry Lambert wrote: > I'm guessing that, even though you are not saying it, that the DTR > drop occurs *immediately* after the probe and attach, and not some > short time after the init scripts have fully rung, and the getty's > are started, initiating "first opens" (this is an educated guess > from looking at the code). No, this is wrong. The probe comes and goes, and I see a long list of probes after it. The drop is after the last kernel probe, and before the first non-kernel message (verified for both single user and multi-user now). Again the best way I know to describe this is that the drop occurs when the "boot sequence" switches from bold print to normal print on a CRT. Hooking up a crt to the same spot, and comparing messages with what I see on the serial port shows this is when it happens. What I have now realized is that this is long before getty runs, since it is not run on the console until the boot scripts complete. I now suspect the bios is leaving DTR high, and when init sets up stdout (for the rc scripts) and/or "opens the console" is when DTR is momentarily dropped. I'll be darned if I can see where that happens in init though. -- Leo Bicknell - bicknell@ufp.org - CCIE 3440 PGP keys at http://www.ufp.org/~bicknell/ Read TMBG List - tmbg-list-request@tmbg.org, www.tmbg.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hackers" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020112012529.GA47286>