Date: Wed, 02 Jul 2003 17:07:36 -0600 From: "Justin T. Gibbs" <gibbs@scsiguy.com> To: David Cross <david.cross@msfc.nasa.gov>, aic7xxx@freebsd.org Subject: Re: aic79xx abort during boot Message-ID: <550170000.1057187256@aslan.btc.adaptec.com> In-Reply-To: <3F036341.97CCE4BC@msfc.nasa.gov> References: <3F0354C7.C3ADD9B@msfc.nasa.gov> <527960000.1057183541@aslan.btc.adaptec.com> <3F036341.97CCE4BC@msfc.nasa.gov>
next in thread | previous in thread | raw e-mail | index | archive | help
>> 2) What other devices are on the same PCI/PCI-X bus. >> > > There are (2) Ultra 320 Internal IBM SCSI drives. There is also an external > Raid which is currently powered off while we try to resolve this issue. The > raid worked with the initial RH8.0 install, but we could not see multiple > luns. This was another reason we were trying to rebuild the kernel from > source. These are SCSI devices. What other *PCI* devices are on the same PCI bus as the U320 controller. >> 3) What devices are you using and with what firmware revision. >> > > Not quite certain of which other devices and the corresponding firmware > revisions you are referring to here. Hopefully the above info is a step in > the right direction though. --Thanks I need to know the firmware revisions for the IBM drives. The most likely cause of your problem is running down-rev firmware on the IBMs. The IBM firmware only stabilized a few months ago. -- Justin
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?550170000.1057187256>