Date: Wed, 24 Sep 2003 15:31:26 -0400 From: "fbsd_user" <fbsd_user@a1poweruser.com> To: <dcrudy@pacbell.net>, <questions@freebsd.org> Subject: RE: PPP modem init string Message-ID: <MIEPLLIBMLEEABPDBIEGIEELEHAA.fbsd_user@a1poweruser.com> In-Reply-To: <3F71BE10.6080001@pacbell.net>
next in thread | previous in thread | raw e-mail | index | archive | help
The (set dial) option sends Hayes 'AT' commands to the modem only
for dial out. Totally different situation for dial in to FBSD. In
that case you have to use the Hayes 'AT' commands to setup and save
your modem configuration in the modem's nvram. You have to tell the
modem to go into answer mode when the modem is powered on. That's
the only way to get it to pick up the inbound call.
Check the questions archives, this question has been answered many
times before and there are detailed instructions on how to setup you
modem and PPP to do this. Search for key works 'PPP dial in' or
'FBSD answering modem' or 'inbound calls'
-----Original Message-----
From: owner-freebsd-questions@freebsd.org
[mailto:owner-freebsd-questions@freebsd.org]On Behalf Of Daniel Rudy
Sent: Wednesday, September 24, 2003 11:54 AM
To: questions@freebsd.org
Subject: PPP modem init string
Hello,
How do I get PPP to send an init string to my modem? I'm
using
different PPP profiles in /etc/ppp/ppp.conf, and each one has a
different requirement for the configuration of the modem such as
outbound ISP and incoming.
Thanks.
--
Daniel Rudy
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to
"freebsd-questions-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?MIEPLLIBMLEEABPDBIEGIEELEHAA.fbsd_user>