Date: Mon, 6 Jul 2009 17:56:20 +0200 From: Atheer Elobadi <atheer.elobadi@gmail.com> To: "Paul B. Mahol" <onemda@gmail.com> Cc: freebsd-questions@freebsd.org Subject: Re: can't get atheros ar2413 to connect under freebsd 7.2 Message-ID: <9a537e0c0907060856n692285c6q3a0c4358d8a448b8@mail.gmail.com> In-Reply-To: <3a142e750907051558g11a0c289g60a82e9a93adfd2f@mail.gmail.com> References: <9a537e0c0907031944h66e783fdsfccc832aa9e4fa80@mail.gmail.com> <4ad871310907050624o4467dbf0n756c8c6b99b9d3eb@mail.gmail.com> <9a537e0c0907050751p505a66ack42f95b247eb9e6c1@mail.gmail.com> <9a537e0c0907051027u59d8949cw7f4abffca76d9c51@mail.gmail.com> <9a537e0c0907051338o5c551489kcffee9d59f60e83c@mail.gmail.com> <3a142e750907051417m65162841sa2eae53e53fbfc3f@mail.gmail.com> <9a537e0c0907051425x172494dfo4b9b57346671498a@mail.gmail.com> <3a142e750907051558g11a0c289g60a82e9a93adfd2f@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
i run 'wpa_supplicant -ddq -i ath0 -c /etc/wpa_supplicant.conf': Initializing interface 'ath0' conf '/etc/wpa_supplicant.conf' driver 'default' ctrl_interface 'N/A' bridge 'N/A' Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf' Reading configuration file '/etc/wpa_supplicant.conf' Priority group 0 id=0 ssid='ALEX' Initializing interface (2) 'ath0' EAPOL: SUPP_PAE entering state DISCONNECTED EAPOL: KEY_RX entering state NO_KEY_RECEIVE EAPOL: SUPP_BE entering state INITIALIZE EAP: EAP entering state DISABLED EAPOL: External notification - portEnabled=0 EAPOL: External notification - portValid=0 Own MAC address: 00:19:7d:be:8c:65 wpa_driver_bsd_set_wpa: enabled=1 wpa_driver_bsd_set_wpa_internal: wpa=3 privacy=1 wpa_driver_bsd_del_key: keyidx=0 wpa_driver_bsd_del_key: keyidx=1 wpa_driver_bsd_del_key: keyidx=2 wpa_driver_bsd_del_key: keyidx=3 wpa_driver_bsd_set_countermeasures: enabled=0 wpa_driver_bsd_set_drop_unencrypted: enabled=1 Setting scan request: 0 sec 100000 usec Added interface ath0 State: DISCONNECTED -> SCANNING Starting AP scan (broadcast SSID) Trying to get current scan results first without requesting a new scan to speed up initial association Received 0 bytes of scan results (0 BSSes) Scan results: 0 Selecting BSS from priority group 0 Try to find WPA-enabled AP Try to find non-WPA AP No suitable AP found. Setting scan request: 0 sec 0 usec Starting AP scan (broadcast SSID) Received 0 bytes of scan results (0 BSSes) Scan results: 0 Selecting BSS from priority group 0 Try to find WPA-enabled AP Try to find non-WPA AP No suitable AP found. Setting scan request: 5 sec 0 usec Starting AP scan (broadcast SSID) and it keeps on like that.. On Mon, Jul 6, 2009 at 12:58 AM, Paul B. Mahol <onemda@gmail.com> wrote: > On 7/5/09, Atheer Elobadi <atheer.elobadi@gmail.com> wrote: > > what data should i provide.. i'm sorry... but i'm new at this > > Run wpa_supplicant with debug flags ... > Try with wlandebug(8) if it is not PBKAC. > > -- > Paul >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?9a537e0c0907060856n692285c6q3a0c4358d8a448b8>