Date: Tue, 22 Jun 2021 10:31:51 +0200 From: Dmitry Salychev via freebsd-arm <freebsd-arm@freebsd.org> To: Mark Millard <marklmi@yahoo.com> Cc: freebsd-arm <freebsd-arm@freebsd.org> Subject: Re: HoneyComb first-boot notes Message-ID: <YNGf999RsaTfNhcp@x230.ds> In-Reply-To: <40AE6447-77AF-4D0E-864F-AD52D9F3346F@yahoo.com> References: <8A6C415F-A57B-4F2F-861F-052B487166D6.ref@yahoo.com> <8A6C415F-A57B-4F2F-861F-052B487166D6@yahoo.com> <YNGT5hcHOBd6cU4T@x230.ds> <40AE6447-77AF-4D0E-864F-AD52D9F3346F@yahoo.com>
next in thread | previous in thread | raw e-mail | index | archive | help
> >> I put an existing FreeBSD Optane into a just delivered > >> HoneyComb, put in the RAM and the matching UEFI/ACPI > >> image on a microsd card and put the card in the slot. > >> I plugged in a USB3 Ethernet dongle, like I use on some > >> other systems. Serial console via its USB port for such. > >> (Optane instead of video card.) The UEFI/ACPI image was > >> extracted from: > >> > >> https://solid-run-images.sos-de-fra-1.exo.io/LX2k/lx2160a_uefi/lx2160acex7_2000_700_2900_8_5_2_sd_81b4bbe.img.xz > >> > >> in order to match the RAM and being based on the > >> most current vintage at: > >> > >> https://github.com/SolidRun/lx2160a_uefi/ > >> > >> It booted. > > > > Could you share whole dmesg? > > I've not done a "boot -v" . The below is actually from a > captured serial console output. It is lightly edited. I > have omitted nearly all loader output (and before). > Thanks for sharing. Have you seen somewhere in output from UEFI (before the loader) that "DPAA2 Management Complex initialized"? Regards, Dmitry
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?YNGf999RsaTfNhcp>