Date: Thu, 01 Sep 2005 17:56:18 +0100 From: "tonix (Antonio Nati)" <tonix@interazioni.it> To: freebsd-scsi@freebsd.org Subject: Re: camcontrol and IDAD0 Message-ID: <6.2.3.4.0.20050901175524.053e60c0@pop.ufficiopostale.it> In-Reply-To: <43172EC8.1010205@samsco.org> References: <6.2.3.4.0.20050901172618.0532ecb0@pop.ufficiopostale.it> <43172EC8.1010205@samsco.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Thanks Scott. So are they an emulation of ATA devices? Also atacontrol doesn't report anything about them. Tonino At 17.39 01/09/2005, Scott Long wrote: >The IDA devices are not under the CAM subsystem, so camcontrol will >have no effect on them. I assume that you are looking for a way to >monitor and manage the controller and arrays? That requires a >custom application that knows how to speak to the controller firmware. Even >if IDA were under CAM, camcontrol would not be able to do this. > >Scott > >Antonio Nati - Inter@zioni wrote: >>How can I handle Compaq Smart Raid disks using camcontrol? >>I've looked a lot around, and found sometimes the same question, >>but no answers: >>I've an internal Smart Raid card (on a DL360) handling a mirrored >>set of disks. >>Boot says: >>Aug 5 21:23:13 ia-srv01 kernel: idad0: <Compaq Logical Drive> on ida0 >>Aug 5 21:23:13 ia-srv01 kernel: idad0: 17359MB (35553120 sectors), >>blocksize=512 >>RAID is working properly, but I have no way (apparently) to check >>it within FreeBSD. >>Command "camcontrol devlist -v" returns >>scbus-1 on xpt0 bus 0: >>< > at scbus-1 target -1 lun -1 (xpt0) >>atacontrol does not says anything about this disk. >>What can I do? Is there any other resource/command available in >>order to solve this problem? >>Thanks, >>Tonino >>_______________________________________________ >>freebsd-scsi@freebsd.org mailing list >>http://lists.freebsd.org/mailman/listinfo/freebsd-scsi >>To unsubscribe, send any mail to "freebsd-scsi-unsubscribe@freebsd.org" > >_______________________________________________ >freebsd-scsi@freebsd.org mailing list >http://lists.freebsd.org/mailman/listinfo/freebsd-scsi >To unsubscribe, send any mail to "freebsd-scsi-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?6.2.3.4.0.20050901175524.053e60c0>