Date: Thu, 1 Dec 2005 10:21:53 +0800 From: Daniel <jahilliya@gmail.com> To: "Robert H. Perry" <rperry@gti.net> Cc: freebsd-questions@freebsd.org Subject: Re: Fax App Recommendations Message-ID: <ba5e78ea0511301821i46ebfb46ka3ad9ba9e30bda08@mail.gmail.com> In-Reply-To: <438E5405.7000807@gti.net> References: <438D3AD4.1060402@gti.net> <438D4207.8010603@gti.net> <438D42D6.60702@gti.net> <ba5e78ea0511292219v3f696459t7498ae242507a8aa@mail.gmail.com> <438E5405.7000807@gti.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On 12/1/05, Robert H. Perry <rperry@gti.net> wrote: > Daniel wrote: > > On 11/30/05, Robert H. Perry <rperry@gti.net> wrote: > > > >>Robert H. Perry wrote: > >> > >>>Robert H. Perry wrote: > >>> > >>> > >>>>Currently running FreeBSD RELEASE 5.4 and a MultiTech Voice/Data/Fax > >>>>modem for dialup internet service on a server-type machine. I also > >>>>run another machine with 3 operating systems (FreeBSD 5.4, Suse 9.2, > >>>>and Windows XP). > >>>> > >>>>My original objective was to install Hylafax on the server and share > >>>>it with the other 3 systems. > >>>> > >>>>I ran into a couple of errors early on and seeked some help from the > >>>>mailing list. Got one response suggesting I reinstall the app from > >>>>source. > >>>> > >> > >>I was preparing to respond to a reply when Thunderbird sent the origina= l > >>to never-never-land. Sorry. Here's the problem I encountered. > >> > >>I was running the sendfax command to test my installation and received > >>an unexpected error message. I used the command taken from the > >>sendfax man page as follows: > >> > >>"sendfax -n -d (destination fax#) /etc/passwd > >>"sendfax: no files to send > >>"usage:..." > >> > >>I reran it using the -x <debug> option and the message indicated: > > > > > > What version of hylafax was installed? > hylafax-4.2.1_3 > > > > Make sure you install gawk. > gawk-3.1.1_1 installed > > > > The native awk binary in FBSD is nawk (not gawk) which caused me some > > greif with hylafax scripts. > > > > So, update ports. Remove hylafax. Install gawk. Reinstall hylafax. > Hope you noticed the second note sent last night. This one was sent > unfinished. Also note that I have mgetty-1.1.33 installed. I don't have mgetty installed, but I do have hylafax 4.2.1_1 installed, gawk 3.1.1_1, and some mime ports (mime-support and metamail) to allow for sending electronic faxes via e-mail to people in our company. I issued the exact same sendfax command: # sendfax -n -d 5551212 /etc/passwd Of course changing 5551212 for one of my faxes and it sent fine. When I started this course of action in setting up hylafax I had no idea about faxes either. I basically followed the instructions on http://www.hylafax.org/howto/install.html#ss2.2 I skipped section 2.2.3 because hylafax was installed. I didn't install mgetty either. I added the line: cuaa0 "/usr/local/sbin/faxgetty" dialup on secure Into /etc/ttys under serial consoles (location probably don't matter) and then ran: init q to rescan the /etc/ttys file. You also want to copy /usr/local/etc/rc.d/hylafax.sh.sample to /usr/local/etc/rc.d/hylafax.sh. This doesn't use rcng so you can just run /usr/local/etc/rc.d/hylafax.sh start which will/should fire up the hylafax daemon. You don't need to worry about the cronjobs (they're there for cleaning up and can be delt with later). So at this point, make sure you do init q and run the rc.d/hylafax.sh start or just reboot. Provided that you completed 2.2.4 (adding modems and configuring setup in general) without any dramas at all from the howto you should be able to run the sendfax command. Are you also certain your modem is operating correctly? You could run the bash shell and then type echo atdt089231414141414 > /dev/cuaa0 and the modem should dial whatever number after atdt and you should either hear it through the modem speaker, see it with the lites on the modem or the phone should ring (if you put your phone number or mobile number in). You should also try using the basic default settings for adding new modems. If you havn't removed hylafax and reinstalled (making sure that the deinstall deleted everything) I'd do that now. To make sure all files it creates are gone you could run: pkg_info -L hylafax\* > hylafax-files Then deinstall hylafax Then: cat hylafax-files and see if any of the files listed still exist. I hope this helps a bit more.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?ba5e78ea0511301821i46ebfb46ka3ad9ba9e30bda08>