Date: Sun, 22 Oct 2006 23:15:29 +0200 From: Torfinn Ingolfsen <torfinn.ingolfsen@broadpark.no> To: freebsd-ppc@freebsd.org Subject: Re: October snapshot available Message-ID: <20061022231529.c0057caa.torfinn.ingolfsen@broadpark.no> In-Reply-To: <453BBDDA.5060204@freebsd.org> References: <AEDBA971-A78D-459D-ACEA-BB2D1983E8E3@mac.com> <20061022192950.9e5ec3fa.torfinn.ingolfsen@broadpark.no> <453BBDDA.5060204@freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
--Boundary_(ID_yMVwC/q4pYTHVtnpTQj36Q)
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7BIT
On Sun, 22 Oct 2006 11:52:10 -0700
Peter Grehan <grehan@freebsd.org> wrote:
> Would you be able to boot from the ofw prompt, but break into the
> loader and do a 'boot -v' ?
Yes, sure can do.
>This may display some more bootlog and isolate where things are going
>astray.
Nope, it didn't display anything more, just thos two lines as before.
> How much RAM do you have on your G4 ?
512 MB.
I have attached an old dmesg (from when FreeBSD was working on
this machine), in case it helps.
--
Regards,
Torfinn
--Boundary_(ID_yMVwC/q4pYTHVtnpTQj36Q)
Content-type: text/plain; name=g4-dmesg-7.0-20051105-SNAP_20060326.txt
Content-transfer-encoding: 7BIT
Content-disposition: attachment;
filename=g4-dmesg-7.0-20051105-SNAP_20060326.txt
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 7.0-20051105-SNAP #0: Sat Nov 5 04:33:52 UTC 2005
root@macmini.ptree32.com.au:/usr/obj/usr/src/sys/GENERIC
Timecounter "decrementer" frequency 33290001 Hz quality 0
cpu0: Motorola PowerPC 7400 revision 2.9, 533.33 MHz
cpu0: HID0 8094c0a4<EMCP,DOZE,DPM,EIEC,ICE,DCE,SGE,BTIC,BHT>
real memory = 528015360 (503 MB)
avail memory = 510623744 (486 MB)
nexus0: <Open Firmware Nexus device>
openpic0: <OpenPIC Interrupt Controller> on nexus0
unin0: <Apple UniNorth System Controller> on nexus0
unin0: Version 17
pcib0: <Apple UniNorth Host-PCI bridge> on nexus0
pci0: <PCI bus> on pcib0
pci0: <display, VGA> at device 16.0 (no driver attached)
pcib1: <Apple UniNorth Host-PCI bridge> on nexus0
pci1: <PCI bus> on pcib1
pci1: <multimedia, audio> at device 19.0 (no driver attached)
macio0: <KeyLargo I/O Controller> mem 0x80000000-0x8007ffff at device 23.0 on pci1
zs0: <Zilog Z8530> mem 0x13000-0x13fff,0x8400-0x84ff,0x8500-0x85ff,0x8600-0x86ff,0x8700-0x87ff irq 22,50 on macio0
zs0: [FAST]
zs0: [FAST]
zstty0 on zs0
zstty1 on zs0
ata0 mem 0x1f000-0x1ffff,0x8a00-0x8aff irq 19 on macio0
ata1 mem 0x20000-0x20fff,0x8b00-0x8bff irq 20 on macio0
ata2 mem 0x21000-0x21fff,0x8c00-0x8cff irq 21 on macio0
ohci0: <Apple KeyLargo USB controller> mem 0x80081000-0x80081fff irq 27 at device 24.0 on pci1
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0
usb0: <Apple KeyLargo USB controller> on ohci0
usb0: USB revision 1.0
uhub0: Apple OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci1: <Apple KeyLargo USB controller> mem 0x80080000-0x80080fff irq 28 at device 25.0 on pci1
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0
usb1: <Apple KeyLargo USB controller> on ohci1
usb1: USB revision 1.0
uhub1: Apple OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pcib2: <Apple UniNorth Host-PCI bridge> on nexus0
pci2: <PCI bus> on pcib2
fwohci0: <Lucent FW322/323> mem 0xf5000000-0xf5000fff irq 40 at device 14.0 on pci2
fwohci0: OHCI version 1.0 (ROM=0)
fwohci0: No. of Isochronous channels is 8.
fwohci0: EUI64 00:30:65:ff:fe:d6:ae:52
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:30:65:d6:ae:52
fwe0: Ethernet address: 02:30:65:d6:ae:52
fwe0: if_start running deferred for Giant
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=2, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
gem0: <Apple GMAC Ethernet Adaptor> mem 0xf5200000-0xf53fffff irq 41 at device 15.0 on pci2
miibus0: <MII bus> on gem0
brgphy0: <BCM5401 10/100/1000baseTX PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
gem0: 10kB RX FIFO, 4kB TX FIFO
gem0: Ethernet address: 00:30:65:d6:ae:52
sc0: <System console> on nexus0
sc0: Unknown <16 virtual consoles, flags=0x300>
uhub2: Mitsumi Electric Hub in Apple Extended USB Keyboard, class 9/0, rev 1.10/1.22, addr 2
uhub2: 3 ports with 2 removable, bus powered
ukbd0: Mitsumi Electric Apple Extended USB Keyboard, rev 1.10/1.22, addr 3, iclass 3/1
uhid0: Mitsumi Electric Apple Extended USB Keyboard, rev 1.10/1.22, addr 3, iclass 3/1
ums0: Fujitsu Takamisawa Component Apple Optical USB Mouse, rev 1.10/1.05, addr 4, iclass 3/1
ums0: 1 buttons.
Timecounters tick every 10.000 msec
ad0: 58644MB <IC35L060AVER07 0 ER6OA44A> at ata0-master BIOSPIO
ad1: 156334MB <Maxtor 6Y160L0 YAR41VW0> at ata0-slave BIOSPIO
acd0: CDRW <SONY CD-RW CRX140E/1.2a> at ata1-master BIOSPIO
Trying to mount root from ufs:/dev/ad1s10
gem0: link state changed to UP
gem0: link state changed to DOWN
gem0: link state changed to UP
gem0: link state changed to DOWN
gem0: link state changed to UP
gem0: link state changed to DOWN
gem0: link state changed to UP
--Boundary_(ID_yMVwC/q4pYTHVtnpTQj36Q)--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20061022231529.c0057caa.torfinn.ingolfsen>