Date: Fri, 2 Nov 2007 11:17:35 +0100 (CET) From: "Gelsema, P \(Patrick\) - FreeBSD" <freebsd@superhero.nl> To: "Scott Long" <scottl@samsco.org> Cc: Jeremy Chadwick <koitsu@freebsd.org>, freebsd-current@freebsd.org, "Gelsema, P \(Patrick\) - FreeBSD" <freebsd@superhero.nl> Subject: Re: da0 detection garbled: da0: <SSMEPA:G AATPE CSPTU3 3#617 5L3auLnWc hHePdS!3> Message-ID: <15769.195.50.100.20.1193998655.squirrel@www.superhero.nl> In-Reply-To: <472A063B.1030201@samsco.org> References: <1154.80.127.127.95.1193916692.squirrel@webmail.superhero.nl> <20071101154109.GA59070@eos.sc1.parodius.com> <63660.195.50.100.20.1193931900.squirrel@www.superhero.nl> <472A063B.1030201@samsco.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, November 1, 2007 18:00, Scott Long wrote: > Gelsema, P (Patrick) - FreeBSD wrote: >> On Thu, November 1, 2007 16:41, Jeremy Chadwick wrote: >>> On Thu, Nov 01, 2007 at 12:31:32PM +0100, Gelsema, P (Patrick) - >>> FreeBSD >>> wrote: >>>> da0: <SSMEPA:G AATPE CSPTU3 3#617 5L3auLnWc hHePdS!3> >>>> >>>> Please let me know if more information is required. >>> This was discussed in October. See the thread here: >>> >>> http://lists.freebsd.org/pipermail/freebsd-current/2007-October/078145.html >>> >> >> I did check the lists as I am subscribed. Must have missed this :( >> >> Anyways.. I still got the issue where the disks are detected as only >> 160.00 MB instead as 320.00MB as in RELENG_6_3. >> > > The speed issue is a big one that I haven't had time to address, and I > don't know if I'll be able to address it before 7.0 is released since it > involves some pretty significant and delicate work. In the mean time, > try running the following after the system is up: > > camcontrol negotiate da0 -a -R 160 > No change between current Parameters and New paramaters. When I am at the console again I can turn off the domain validation on the Adaptec card in the bios. Any use for trying this? Rgds, Patrick > Scott > _______________________________________________ > freebsd-current@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?15769.195.50.100.20.1193998655.squirrel>