Date: Sat, 10 Jan 2009 15:57:36 +0200 From: Andriy Gapon <avg@icyb.net.ua> To: FreeBSD Stable <freebsd-stable@freebsd.org> Subject: Re: pciconf: incorrect description for Marvell 88SX6101 chip Message-ID: <4968A950.8000806@icyb.net.ua> In-Reply-To: <4926B42E.2010408@icyb.net.ua> References: <4926B42E.2010408@icyb.net.ua>
next in thread | previous in thread | raw e-mail | index | archive | help
on 21/11/2008 15:14 Andriy Gapon said the following: > I wasn't sure where this belongs, so writing here. > This is stable/7 on Intel DG33TL: > > $ pciconf -lv > ... > atapci0@pci0:3:0:0: class=0x01018f card=0x610111ab chip=0x610111ab > rev=0xb2 hdr=0x00 > vendor = 'Marvell Semiconductor (Was: Galileo Technology Ltd)' > device = '6101 SATA2 Controller' > class = mass storage > subclass = ATA > ... > > This is actually a PATA controller (SATA is provided by ICH9). > lspci is more correct: > $ lspci -v > ... > 03:00.0 IDE interface: Marvell Technology Group Ltd. 88SE6101 > single-port PATA133 interface (rev b2) (prog-if 8f [Master SecP SecO > PriP PriO]) > Subsystem: Marvell Technology Group Ltd. 88SE6101 single-port > PATA133 interface > ... > > ATA driver is also cool: > atapci0: <Marvell 88SX6101 UDMA133 controller> > This is very minor but still... Here's a tiny patch. diff --git a/share/misc/pci_vendors b/share/misc/pci_vendors index 8286310..c92d12e 100644 --- a/share/misc/pci_vendors +++ b/share/misc/pci_vendors @@ -4606,7 +4606,7 @@ 6041 MV88SX6041 Marvell Technology Group Ltd. MV88SX6041 4-port SATA II PCI-X Controller (rev 03) 6042 MV88SX6042 4-port SATA II PCI-X Controller 6081 MV88SX6081 8-port SATA II PCI-X Controller - 6101 6101 SATA2 Controller + 6101 MV88SX6101 1-port UltraATA/133 Controller 6111 6111 SATA2 Controller 6120 6120 SATA2 Controller 6121 6121 SATA2 Controller -- Andriy Gapon
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4968A950.8000806>