Date: Wed, 25 Mar 2009 12:15:29 -0500 From: Robert Noland <rnoland@FreeBSD.org> To: Gustau Perez <gperez@entel.upc.edu> Cc: freebsd-x11@FreeBSD.org Subject: Re: [PREVIEW] Nouveau on FreeBSD (Take 2) Message-ID: <1238001329.1828.16.camel@balrog.2hip.net> In-Reply-To: <49CA5243.6060808@entel.upc.edu> References: <1237680263.1938.10.camel@balrog.2hip.net> <49C95C7E.7090003@entel.upc.edu> <1237948593.1829.12.camel@balrog.2hip.net> <49CA5243.6060808@entel.upc.edu>
next in thread | previous in thread | raw e-mail | index | archive | help
--=-goKhQA6BjR3Dt1NXN3br Content-Type: text/plain Content-Transfer-Encoding: quoted-printable On Wed, 2009-03-25 at 16:48 +0100, Gustau Perez wrote: > >> Hi. > >> > >> using git version of both libdrm and xf86-video-nouveau I've been ab= le=20 > >> to start gnome. My card is a NVS 135M. Seems quite stable (i'm using i= t=20 > >> right now).The only thing is that switching from one application to=20 > >> another felt a llitle slow. > >> > >> Using composition in metacity seems to work to some extend. I've=20 > >> experienced some problems (not always, sometimes it works and sometime= s=20 > >> it doesn't) with vlc about bad window request (if I remember well).=20 > >> Avant-window-navigator (I've ported it and still testing) tries to sta= rt=20 > >> as it detects composition support, but can't proceed. > >> > >> Do you want my xorg log ? > >> =20 > > > > Sure. > > =20 >=20 > Hi Robert, >=20 > Here I'm attaching both dmesg and Xorg.log of a system where a NV50=20 > is detected but can't work. It is a NVS 290. I'm using a brand new =20 > xorg.conf file generated via Xorg --configure, just replacing nv with=20 > nouveau. The system is unable to proceed. I'm using current AMD64. I=20 > think the problem is that I'm using the first patchset you sent to the=20 > list. If this is the case, sorry :) It does look like the first patchset, which won't work on NV50. > I'll send my laptop's Xorg.log file (not now, in a while) which seems=20 > to work quite well. Haven't tried dual head with xrandr, I think it is=20 > supposed to work to some extend. My screensaver (pacman) argues about=20 > missing GLX, I suppose it is normal in the current state of the driver.=20 > Anyway, will inform of any progress :)=20 GLX should work, though it is using swrast as there is no released (or working, yet) hardware 3d for NV50.=20 =20 > Greets, >=20 > Gus > =20 > plain text document attachment (dmesg.txt) > Copyright (c) 1992-2009 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 8.0-CURRENT #2: Wed Mar 25 15:45:56 CET 2009 > root@telem2-1proves.upc.es:/usr/obj/usr/src/sys/CUSTOM > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Intel(R) Core(TM)2 Duo CPU E7300 @ 2.66GHz (2660.00-MHz K8-clas= s CPU) > Origin =3D "GenuineIntel" Id =3D 0x10676 Stepping =3D 6 > Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,= PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > Features2=3D0x8e39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM= ,SSE4.1> > AMD Features=3D0x20100800<SYSCALL,NX,LM> > AMD Features2=3D0x1<LAHF> > TSC: P-state invariant > Cores per package: 2 > usable memory =3D 4211896320 (4016 MB) > avail memory =3D 4050989056 (3863 MB) > ACPI APIC Table: <DELL B9K > > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs > cpu0 (BSP): APIC ID: 0 > cpu1 (AP): APIC ID: 1 > ioapic0: Changing APIC ID to 8 > ioapic0 <Version 2.0> irqs 0-23 on motherboard > lapic0: Forcing LINT1 to edge trigger > kbd1 at kbdmux0 > acpi0: <DELL B9K > on motherboard > acpi0: [ITHREAD] > acpi0: Power Button (fixed) > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 > acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on a= cpi0 > Timecounter "HPET" frequency 14318180 Hz quality 900 > acpi_button0: <Power Button> on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 > pci1: <ACPI PCI bus> on pcib1 > vgapci0: <VGA-compatible display> port 0xdc80-0xdcff mem 0xfc000000-0xfcf= fffff,0xd0000000-0xdfffffff,0xfa000000-0xfbffffff irq 16 at device 0.0 on p= ci1 > pcib2: <PCI-PCI bridge> irq 16 at device 6.0 on pci0 > pci2: <PCI bus> on pcib2 > uhci0: <Intel 82801I (ICH9) USB controller> port 0xff20-0xff3f irq 16 at = device 26.0 on pci0 > uhci0: [ITHREAD] > uhci0: LegSup =3D 0x0f10 > usbus0: <Intel 82801I (ICH9) USB controller> on uhci0 > uhci1: <Intel 82801I (ICH9) USB controller> port 0xff00-0xff1f irq 17 at = device 26.1 on pci0 > uhci1: [ITHREAD] > uhci1: LegSup =3D 0x0f10 > usbus1: <Intel 82801I (ICH9) USB controller> on uhci1 > uhci2: <Intel 82801I (ICH9) USB controller> port 0xecc0-0xecdf irq 22 at = device 26.2 on pci0 > uhci2: [ITHREAD] > uhci2: LegSup =3D 0x2f00 > usbus2: <Intel 82801I (ICH9) USB controller> on uhci2 > ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xfdffbc00-0xfdffbfff= irq 22 at device 26.7 on pci0 > ehci0: [ITHREAD] > usbus3: waiting for BIOS to give up control > usbus3: EHCI version 1.0 > usbus3: <Intel 82801I (ICH9) USB 2.0 controller> on ehci0 > pci0: <multimedia, HDA> at device 27.0 (no driver attached) > pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 > pci3: <ACPI PCI bus> on pcib3 > pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 > pci4: <ACPI PCI bus> on pcib4 > bge0: <Broadcom NetLink Gigabit Ethernet Controller, ASIC rev. 0xb002> me= m 0xf9ef0000-0xf9efffff irq 17 at device 0.0 on pci4 > miibus0: <MII bus> on bge0 > brgphy0: <BCM5787 10/100/1000baseTX PHY> PHY 1 on miibus0 > brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000= baseT-FDX, auto > bge0: Ethernet address: 00:22:19:12:de:fe > bge0: [ITHREAD] > uhci3: <Intel 82801I (ICH9) USB controller> port 0xff80-0xff9f irq 23 at = device 29.0 on pci0 > uhci3: [ITHREAD] > uhci3: LegSup =3D 0x001b > usbus4: <Intel 82801I (ICH9) USB controller> on uhci3 > uhci4: <Intel 82801I (ICH9) USB controller> port 0xff60-0xff7f irq 17 at = device 29.1 on pci0 > uhci4: [ITHREAD] > uhci4: LegSup =3D 0x0010 > usbus5: <Intel 82801I (ICH9) USB controller> on uhci4 > uhci5: <Intel 82801I (ICH9) USB controller> port 0xff40-0xff5f irq 18 at = device 29.2 on pci0 > uhci5: [ITHREAD] > uhci5: LegSup =3D 0x0010 > usbus6: <Intel 82801I (ICH9) USB controller> on uhci5 > ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xff980800-0xff980bff= irq 23 at device 29.7 on pci0 > ehci1: [ITHREAD] > usbus7: waiting for BIOS to give up control > usbus7: timed out waiting for BIOS > usbus7: EHCI version 1.0 > usbus7: <Intel 82801I (ICH9) USB 2.0 controller> on ehci1 > pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0 > pci5: <ACPI PCI bus> on pcib5 > xl0: <3Com 3c905-TX Fast Etherlink XL> port 0xccc0-0xccff irq 16 at devic= e 4.0 on pci5 > miibus1: <MII bus> on xl0 > nsphy0: <DP83840 10/100 media interface> PHY 24 on miibus1 > nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > xl0: Ethernet address: 00:60:08:65:2f:e9 > xl0: [ITHREAD] > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <Intel AHCI controller> port 0xfe00-0xfe07,0xfe10-0xfe13,0xfe20-= 0xfe27,0xfe30-0xfe33,0xfec0-0xfedf mem 0xff970000-0xff9707ff irq 20 at devi= ce 31.2 on pci0 > atapci0: [ITHREAD] > atapci0: AHCI Version 01.20 controller with 6 ports PM not supported > ata2: <ATA channel 0> on atapci0 > ata2: [ITHREAD] > ata3: <ATA channel 1> on atapci0 > ata3: [ITHREAD] > ata4: <ATA channel 2> on atapci0 > ata4: [ITHREAD] > ata5: <ATA channel 3> on atapci0 > ata5: [ITHREAD] > ata6: <ATA channel 4> on atapci0 > ata6: [ITHREAD] > ata7: <ATA channel 5> on atapci0 > ata7: [ITHREAD] > pci0: <serial bus, SMBus> at device 31.3 (no driver attached) > atrtc0: <AT realtime clock> port 0x70-0x7f irq 8 on acpi0 > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > atkbd0: [ITHREAD] > ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 on acpi0 > ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode > ppc0: FIFO with 16/16/8 bytes threshold > ppc0: [ITHREAD] > ppbus0: <Parallel port bus> on ppc0 > plip0: <PLIP network interface> on ppbus0 > plip0: [ITHREAD] > lpt0: <Printer> on ppbus0 > lpt0: [ITHREAD] > lpt0: Interrupt-driven port > ppi0: <Parallel I/O> on ppbus0 > uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 > uart0: [FILTER] > cpu0: <ACPI CPU> on acpi0 > est0: <Enhanced SpeedStep Frequency Control> on cpu0 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 6160a1706000a17 > device_attach: est0 attach returned 6 > p4tcc0: <CPU Frequency Thermal Control> on cpu0 > cpu1: <ACPI CPU> on acpi0 > est1: <Enhanced SpeedStep Frequency Control> on cpu1 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 6160a1706000a17 > device_attach: est1 attach returned 6 > p4tcc1: <CPU Frequency Thermal Control> on cpu1 > orm0: <ISA Option ROMs> at iomem 0xc0000-0xccfff,0xcd000-0xcefff,0xcf000-= 0xd0fff,0xd1000-0xd37ff,0xd3800-0xd3fff on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=3D0x300> > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > Timecounters tick every 1.000 msec > usbus0: 12Mbps Full Speed USB v1.0 > usbus1: 12Mbps Full Speed USB v1.0 > usbus2: 12Mbps Full Speed USB v1.0 > usbus3: 480Mbps High Speed USB v2.0 > usbus4: 12Mbps Full Speed USB v1.0 > usbus5: 12Mbps Full Speed USB v1.0 > usbus6: 12Mbps Full Speed USB v1.0 > usbus7: 480Mbps High Speed USB v2.0 > ad4: 238418MB <SAMSUNG HD251HJ 1AC01113> at ata2-master SATA300 > ugen0.1: <Intel> at usbus0 > uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 > ugen1.1: <Intel> at usbus1 > uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 > ugen2.1: <Intel> at usbus2 > uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 > ugen3.1: <Intel> at usbus3 > uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 > ugen4.1: <Intel> at usbus4 > uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 > ugen5.1: <Intel> at usbus5 > uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 > ugen6.1: <Intel> at usbus6 > uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 > ugen7.1: <Intel> at usbus7 > uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7 > GEOM: ad4s1: geometry does not match label (255h,63s !=3D 16h,63s). > acd0: DVDROM <TSSTcorpDVD-ROM TS-H353B/D500> at ata3-master SATA150 > lapic1: Forcing LINT1 to edge trigger > SMP: AP CPU #1 Launched! > Root mount waiting for: usbus7 usbus6 usbus5 usbus4 usbus3 usbus2 usbus1 = usbus0 > uhub0: 2 ports with 2 removable, self powered > Root mount waiting for: usbus7 usbus6 usbus5 usbus4 usbus3 usbus2 usbus1 > uhub1: 2 ports with 2 removable, self powered > Root mount waiting for: usbus7 usbus6 usbus5 usbus4 usbus3 usbus2 > uhub2: 2 ports with 2 removable, self powered > Root mount waiting for: usbus7 usbus6 usbus5 usbus4 usbus3 > uhub4: 2 ports with 2 removable, self powered > Root mount waiting for: usbus7 usbus6 usbus5 usbus3 > uhub5: 2 ports with 2 removable, self powered > Root mount waiting for: usbus7 usbus6 usbus3 > uhub6: 2 ports with 2 removable, self powered > Root mount waiting for: usbus7 usbus3 > Root mount waiting for: usbus7 usbus3 > Root mount waiting for: usbus7 usbus3 > uhub3: 6 ports with 6 removable, self powered > uhub7: 6 ports with 6 removable, self powered > Root mount waiting for: usbus3 > Root mount waiting for: usbus3 > ugen3.2: <Kingston> at usbus3 > umass0: <Kingston DataTraveler 2.0, class 0/0, rev 2.00/2.00, addr 2> on = usbus3 > umass0: SCSI over Bulk-Only; quirks =3D 0x0000 > ugen0.2: <Microsoft> at usbus0 > ums0: <Microsoft Basic Optical Mouse, class 0/0, rev 1.10/0.00, addr 2> o= n usbus0 > ums0: 3 buttons and [XYZ] coordinates > Root mount waiting for: usbus3 > umass0:0:0:-1: Attached to scbus0 > Trying to mount root from ufs:/dev/ad4s1a > da0 at umass-sim0 bus 0 target 0 lun 0 > da0: <Kingston DataTraveler 2.0 1.00> Removable Direct Access SCSI-2 devi= ce=20 > da0: 40.000MB/s transfers > da0: 7782MB (15937536 512 byte sectors: 255H 63S/T 992C) > GEOM_LABEL: Label for provider da0s1 is msdosfs/KING8GB. > logo_saver: the console does not support M_VGA_CG320 > module_register_init: MOD_LOAD (logo_saver, 0xffffffff80e22010, 0) error = 19 > bge0: link state changed to UP > drm0: <NVidia Display Adapter> on vgapci0 > info: [drm] MSI enabled 1 message(s) > info: [drm] Detected an NV50 generation card (0x086f00a2) > vgapci0: child drm0 requested pci_enable_busmaster > info: [drm] Initialized nouveau 0.0.12 20060213 > pid 27952 (Xorg), uid 0: exited on signal 6 (core dumped) > pid 28004 (Xorg), uid 0: exited on signal 6 (core dumped) > error: [drm:pid28035:drm_alloc_resource] *ERROR* Couldn't find resource 0= x2 > error: [drm:pid28035:drm_alloc_resource] *ERROR* Couldn't find resource 0= x2 > error: [drm:pid28035:drm_alloc_resource] *ERROR* Couldn't find resource 0= x2 > drm0: [ITHREAD] > info: [drm] Allocating FIFO number 1 > info: [drm] nouveau_fifo_alloc: initialised FIFO 1 > pid 28035 (Xorg), uid 0: exited on signal 6 (core dumped) > info: [drm] nouveau_fifo_free: freeing fifo 1 > plain text document attachment (Xorg.0.log) > X.Org X Server 1.5.3 > Release Date: 5 November 2008 > X Protocol Version 11, Revision 0 > Build Operating System: FreeBSD 8.0-CURRENT amd64=20 > Current Operating System: FreeBSD telem2-1proves.upc.es 8.0-CURRENT FreeB= SD 8.0-CURRENT #2: Wed Mar 25 15:45:56 CET 2009 root@telem2-1proves.upc= .es:/usr/obj/usr/src/sys/CUSTOM amd64 > Build Date: 25 March 2009 09:19:30AM > =20 > Before reporting problems, check http://wiki.x.org > to make sure that you have the latest version. > Markers: (--) probed, (**) from config file, (=3D=3D) default setting, > (++) from command line, (!!) notice, (II) informational, > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > (=3D=3D) Log file: "/var/log/Xorg.0.log", Time: Wed Mar 25 16:29:29 2009 > (++) Using config file: "/root/xorg.conf.new" > (=3D=3D) ServerLayout "X.org Configured" > (**) |-->Screen "Screen0" (0) > (**) | |-->Monitor "Monitor0" > (**) | |-->Device "Card0" > (**) |-->Input Device "Mouse0" > (**) |-->Input Device "Keyboard0" > (=3D=3D) Automatically adding devices > (=3D=3D) Automatically enabling devices > (=3D=3D) Including the default font path /usr/local/lib/X11/fonts/misc/,/= usr/local/lib/X11/fonts/TTF/,/usr/local/lib/X11/fonts/OTF,/usr/local/lib/X1= 1/fonts/Type1/,/usr/local/lib/X11/fonts/100dpi/,/usr/local/lib/X11/fonts/75= dpi/. > (**) FontPath set to: > /usr/local/lib/X11/fonts/misc/, > /usr/local/lib/X11/fonts/TTF/, > /usr/local/lib/X11/fonts/OTF, > /usr/local/lib/X11/fonts/Type1/, > /usr/local/lib/X11/fonts/100dpi/, > /usr/local/lib/X11/fonts/75dpi/, > /usr/local/lib/X11/fonts/misc/, > /usr/local/lib/X11/fonts/TTF/, > /usr/local/lib/X11/fonts/OTF, > /usr/local/lib/X11/fonts/Type1/, > /usr/local/lib/X11/fonts/100dpi/, > /usr/local/lib/X11/fonts/75dpi/ > (**) ModulePath set to "/usr/local/lib/xorg/modules" > (WW) AllowEmptyInput is on, devices using drivers 'kbd' or 'mouse' will b= e disabled. > (WW) Disabling Mouse0 > (WW) Disabling Keyboard0 > (II) Loader magic: 0x671240 > (II) Module ABI versions: > X.Org ANSI C Emulation: 0.4 > X.Org Video Driver: 4.1 > X.Org XInput driver : 2.1 > X.Org Server Extension : 1.1 > X.Org Font Renderer : 0.6 > (II) Loader running on freebsd > (--) Using syscons driver with X support (version 2.0) > (--) using VT number 9 >=20 > (--) PCI:*(0@1:0:0) nVidia Corporation Quadro NVS 290 rev 161, Mem @ 0xfc= 000000/16777216, 0xd0000000/268435456, 0xfa000000/33554432, I/O @ 0x0000dc8= 0/128, BIOS @ 0x????????/65536 > (II) System resource ranges: > [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > (II) "extmod" will be loaded. This was enabled by default and also specif= ied in the config file. > (II) "dbe" will be loaded. This was enabled by default and also specified= in the config file. > (II) "glx" will be loaded. This was enabled by default and also specified= in the config file. > (II) "freetype" will be loaded. This was enabled by default and also spec= ified in the config file. > (II) "record" will be loaded. This was enabled by default and also specif= ied in the config file. > (II) "dri" will be loaded. This was enabled by default and also specified= in the config file. > (II) LoadModule: "extmod" >=20 > (II) Loading /usr/local/lib/xorg/modules/extensions//libextmod.so > (II) Module extmod: vendor=3D"X.Org Foundation" > compiled for 1.5.3, module version =3D 1.0.0 > Module class: X.Org Server Extension > ABI class: X.Org Server Extension, version 1.1 > (II) Loading extension SHAPE > (II) Loading extension MIT-SUNDRY-NONSTANDARD > (II) Loading extension BIG-REQUESTS > (II) Loading extension SYNC > (II) Loading extension MIT-SCREEN-SAVER > (II) Loading extension XC-MISC > (II) Loading extension XFree86-VidModeExtension > (II) Loading extension XFree86-Misc > (II) Loading extension XFree86-DGA > (II) Loading extension DPMS > (II) Loading extension TOG-CUP > (II) Loading extension Extended-Visual-Information > (II) Loading extension XVideo > (II) Loading extension XVideo-MotionCompensation > (II) Loading extension X-Resource > (II) LoadModule: "record" >=20 > (II) Loading /usr/local/lib/xorg/modules/extensions//librecord.so > (II) Module record: vendor=3D"X.Org Foundation" > compiled for 1.5.3, module version =3D 1.13.0 > Module class: X.Org Server Extension > ABI class: X.Org Server Extension, version 1.1 > (II) Loading extension RECORD > (II) LoadModule: "dbe" >=20 > (II) Loading /usr/local/lib/xorg/modules/extensions//libdbe.so > (II) Module dbe: vendor=3D"X.Org Foundation" > compiled for 1.5.3, module version =3D 1.0.0 > Module class: X.Org Server Extension > ABI class: X.Org Server Extension, version 1.1 > (II) Loading extension DOUBLE-BUFFER > (II) LoadModule: "glx" >=20 > (II) Loading /usr/local/lib/xorg/modules/extensions//libglx.so > (II) Module glx: vendor=3D"X.Org Foundation" > compiled for 1.5.3, module version =3D 1.0.0 > ABI class: X.Org Server Extension, version 1.1 > (=3D=3D) AIGLX disabled > (=3D=3D) Exporting typical set of GLX visuals > (II) Loading extension GLX > (II) LoadModule: "xtrap" >=20 > (II) Loading /usr/local/lib/xorg/modules/extensions//libxtrap.so > (II) Module xtrap: vendor=3D"X.Org Foundation" > compiled for 1.5.3, module version =3D 1.0.0 > Module class: X.Org Server Extension > ABI class: X.Org Server Extension, version 1.1 > (II) Loading extension DEC-XTRAP > (II) LoadModule: "dri" >=20 > (II) Loading /usr/local/lib/xorg/modules/extensions//libdri.so > (II) Module dri: vendor=3D"X.Org Foundation" > compiled for 1.5.3, module version =3D 1.0.0 > ABI class: X.Org Server Extension, version 1.1 > (II) Loading extension XFree86-DRI > (II) LoadModule: "freetype" >=20 > (II) Loading /usr/local/lib/xorg/modules/fonts//libfreetype.so > (II) Module freetype: vendor=3D"X.Org Foundation & the After X-TT Project= " > compiled for 1.5.3, module version =3D 2.1.0 > Module class: X.Org Font Renderer > ABI class: X.Org Font Renderer, version 0.6 > (II) Loading font FreeType > (II) LoadModule: "nouveau" >=20 > (II) Loading /usr/local/lib/xorg/modules/drivers//nouveau_drv.so > (II) Module nouveau: vendor=3D"X.Org Foundation" > compiled for 1.5.3, module version =3D 0.0.10 > Module class: X.Org Video Driver > ABI class: X.Org Video Driver, version 4.1 > (II) NOUVEAU driver=20 > (II) NOUVEAU driver for NVIDIA chipset families : > RIVA TNT (NV04) > RIVA TNT2 (NV05) > GeForce 256 (NV10) > GeForce 2 (NV11, NV15) > GeForce 4MX (NV17, NV18) > GeForce 3 (NV20) > GeForce 4Ti (NV25, NV28) > GeForce FX (NV3x) > GeForce 6 (NV4x) > GeForce 7 (G7x) > GeForce 8 (G8x) > (II) Primary Device is: PCI 01@00:00:0 > (II) resource ranges after probing: > [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > (--) NOUVEAU(0): Chipset: "NVIDIA NV86" > (II) Loading sub module "int10" > (II) LoadModule: "int10" >=20 > (II) Loading /usr/local/lib/xorg/modules//libint10.so > (II) Module int10: vendor=3D"X.Org Foundation" > compiled for 1.5.3, module version =3D 1.0.0 > ABI class: X.Org Video Driver, version 4.1 > (II) NOUVEAU(0): Initializing int10 > (=3D=3D) NOUVEAU(0): Write-combining range (0xa0000,0x20000) was already = clear > (=3D=3D) NOUVEAU(0): Write-combining range (0xc0000,0x40000) was already = clear > (II) NOUVEAU(0): Primary V_BIOS segment is: 0xc000 > (=3D=3D) NOUVEAU(0): Write-combining range (0x0,0x1000) was already clear > drmOpenDevice: node name is /dev/dri/card0 > drmOpenDevice: open result is 10, (OK) > drmOpenDevice: node name is /dev/dri/card0 > drmOpenDevice: open result is 10, (OK) > drmOpenByBusid: Searching for BusID pci:0000:01:00.0 > drmOpenDevice: node name is /dev/dri/card0 > drmOpenDevice: open result is 10, (OK) > drmOpenByBusid: drmOpenMinor returns 10 > drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0 > (II) [drm] DRM interface version 1.2 > (II) [drm] DRM open master succeeded. > (II) NOUVEAU(0): [drm] nouveau interface version: 0.0.12 > (--) NOUVEAU(0): [drm] kernel modesetting not available > (--) NOUVEAU(0): VESA-HACK: Console VGA mode is 0x3 > (=3D=3D) NOUVEAU(0): Depth 24, (=3D=3D) framebuffer bpp 32 > (=3D=3D) NOUVEAU(0): RGB weight 888 > (=3D=3D) NOUVEAU(0): Default visual is TrueColor > (II) Loading sub module "vgahw" > (II) LoadModule: "vgahw" >=20 > (II) Loading /usr/local/lib/xorg/modules//libvgahw.so > (II) Module vgahw: vendor=3D"X.Org Foundation" > compiled for 1.5.3, module version =3D 0.1.0 > ABI class: X.Org Video Driver, version 4.1 > (=3D=3D) NOUVEAU(0): Randr1.2 support enabled > (=3D=3D) NOUVEAU(0): Using HW cursor > (--) NOUVEAU(0): Linear framebuffer at 0xD0000000 > (--) NOUVEAU(0): MMIO registers at 0xFC000000 > (II) NOUVEAU(0): Initial CRTC_OWNER is 0 > (II) NOUVEAU(0): Attempting to load BIOS image from PROM > (II) NOUVEAU(0): ... appears to be valid > (II) NOUVEAU(0): BIT BIOS found > (II) NOUVEAU(0): Bios version 60.86.63.00 > (WW) NOUVEAU(0): TMDS table revision 2.0 not currently supported > (II) NOUVEAU(0): Found Display Configuration Block version 4.0 > (!!) NOUVEAU(0): Raw DCB entry 0: 02011300 00000028 > (!!) NOUVEAU(0): Raw DCB entry 1: 01011302 00000010 > (!!) NOUVEAU(0): Raw DCB entry 2: 01000310 00000028 > (!!) NOUVEAU(0): Raw DCB entry 3: 02000312 00000010 > (!!) NOUVEAU(0): Raw DCB entry 4: 0000000e 00000000 > (--) NOUVEAU(0): Parsing VBIOS init table 0 at offset 0xBD9C > (--) NOUVEAU(0): Parsing VBIOS init table 1 at offset 0xC106 > (--) NOUVEAU(0): Parsing VBIOS init table 2 at offset 0xCD47 > (--) NOUVEAU(0): Parsing VBIOS init table 3 at offset 0xCE39 > (--) NOUVEAU(0): Parsing VBIOS init table 4 at offset 0xD033 > (II) NOUVEAU(0): NV50DispPreInit is called. > (--) NOUVEAU(0): DCB entry 0: type: 0, i2c_index: 0, heads: 3, bus: 1, or= : 2 > (II) NOUVEAU(0): I2C bus "DVI-1" initialized. > (II) NOUVEAU(0): DAC-1 attached with index 0 to DVI-1 > (--) NOUVEAU(0): DCB entry 1: type: 2, i2c_index: 0, heads: 3, bus: 1, or= : 1 > (II) NOUVEAU(0): SOR-0 attached with index 1 to DVI-1 > (--) NOUVEAU(0): DCB entry 2: type: 0, i2c_index: 1, heads: 3, bus: 0, or= : 1 > (II) NOUVEAU(0): I2C bus "DVI-0" initialized. > (II) NOUVEAU(0): DAC-0 attached with index 0 to DVI-0 > (--) NOUVEAU(0): DCB entry 3: type: 2, i2c_index: 1, heads: 3, bus: 0, or= : 2 > (II) NOUVEAU(0): SOR-1 attached with index 1 to DVI-0 > (II) NOUVEAU(0): Output DVI-0 using monitor section Monitor0 > (II) NOUVEAU(0): Output DVI-1 has no monitor section > (II) NOUVEAU(0): nv50_output_detect is called. > (II) NOUVEAU(0): NV50ConnectorDDCDetect is called. > (II) NOUVEAU(0): I2C device "DVI-0:ddc2" registered at address 0xA0. > (II) NOUVEAU(0): I2C device "DVI-0:ddc2" removed. > (II) NOUVEAU(0): Using bios provided load value of 340 > (--) NOUVEAU(0): No Load present on DAC-0 > (II) NOUVEAU(0): nv50_output_detect is called. > (II) NOUVEAU(0): NV50ConnectorDDCDetect is called. > (II) NOUVEAU(0): I2C device "DVI-1:ddc2" registered at address 0xA0. > (II) NOUVEAU(0): Detected a Analog output on DVI-1 > (II) NOUVEAU(0): Found a suitable output, index 0 > (II) NOUVEAU(0): nv50_output_detect is called. > (II) NOUVEAU(0): NV50ConnectorDDCDetect is called. > (II) NOUVEAU(0): NV50ConnectorGetDDCModes is called. > (II) NOUVEAU(0): EDID vendor "STN", prod id 5 > (II) NOUVEAU(0): DVI-1: preferred mode is 1024x768 > (II) NOUVEAU(0): nv50_output_mode_valid is called. > (II) NOUVEAU(0): nv50_output_mode_valid is called. > (II) NOUVEAU(0): nv50_output_mode_valid is called. > (II) NOUVEAU(0): nv50_output_mode_valid is called. > (II) NOUVEAU(0): nv50_output_mode_valid is called. > (II) NOUVEAU(0): nv50_output_mode_valid is called. > (II) NOUVEAU(0): nv50_output_mode_valid is called. > (II) NOUVEAU(0): nv50_output_mode_valid is called. > (II) NOUVEAU(0): nv50_output_mode_valid is called. > (II) NOUVEAU(0): nv50_output_mode_valid is called. > (II) NOUVEAU(0): nv50_output_mode_valid is called. > (II) NOUVEAU(0): nv50_output_mode_valid is called. > (II) NOUVEAU(0): nv50_output_mode_valid is called. > (II) NOUVEAU(0): nv50_output_mode_valid is called. > (II) NOUVEAU(0): nv50_output_mode_valid is called. > (II) NOUVEAU(0): nv50_output_mode_valid is called. > (II) NOUVEAU(0): nv50_output_mode_valid is called. > (II) NOUVEAU(0): nv50_output_mode_valid is called. > (II) NOUVEAU(0): nv50_output_mode_valid is called. > (II) NOUVEAU(0): nv50_output_mode_valid is called. > (II) NOUVEAU(0): nv50_output_mode_valid is called. > (II) NOUVEAU(0): nv50_output_mode_valid is called. > (II) NOUVEAU(0): nv50_output_mode_valid is called. > (II) NOUVEAU(0): nv50_output_mode_valid is called. > (II) NOUVEAU(0): nv50_output_mode_valid is called. > (II) NOUVEAU(0): nv50_output_mode_valid is called. > (II) NOUVEAU(0): nv50_output_mode_valid is called. > (II) NOUVEAU(0): nv50_output_mode_valid is called. > (II) NOUVEAU(0): nv50_output_mode_valid is called. > (II) NOUVEAU(0): nv50_output_mode_valid is called. > (II) NOUVEAU(0): nv50_output_mode_valid is called. > (II) NOUVEAU(0): nv50_output_mode_valid is called. > (II) NOUVEAU(0): nv50_output_mode_valid is called. > (II) NOUVEAU(0): nv50_output_mode_valid is called. > (II) NOUVEAU(0): nv50_output_mode_valid is called. > (II) NOUVEAU(0): nv50_output_mode_valid is called. > (II) NOUVEAU(0): nv50_output_mode_valid is called. > (II) NOUVEAU(0): nv50_output_mode_valid is called. > (II) NOUVEAU(0): nv50_output_mode_valid is called. > (II) NOUVEAU(0): nv50_output_mode_valid is called. > (II) NOUVEAU(0): nv50_output_mode_valid is called. > (II) NOUVEAU(0): nv50_output_mode_valid is called. > (II) NOUVEAU(0): nv50_output_mode_valid is called. > (II) NOUVEAU(0): nv50_output_mode_valid is called. > (II) NOUVEAU(0): nv50_output_mode_valid is called. > (II) NOUVEAU(0): nv50_output_mode_valid is called. > (II) NOUVEAU(0): nv50_output_mode_valid is called. > (II) NOUVEAU(0): nv50_output_mode_valid is called. > (II) NOUVEAU(0): nv50_output_mode_valid is called. > (II) NOUVEAU(0): nv50_output_mode_valid is called. > (II) NOUVEAU(0): nv50_output_mode_valid is called. > (II) NOUVEAU(0): nv50_output_mode_valid is called. > (II) NOUVEAU(0): nv50_output_mode_valid is called. > (II) NOUVEAU(0): nv50_output_mode_valid is called. > (II) NOUVEAU(0): nv50_output_mode_valid is called. > (II) NOUVEAU(0): nv50_output_mode_valid is called. > (II) NOUVEAU(0): nv50_output_mode_valid is called. > (II) NOUVEAU(0): nv50_output_mode_valid is called. > (II) NOUVEAU(0): nv50_output_mode_valid is called. > (II) NOUVEAU(0): nv50_output_mode_valid is called. > (II) NOUVEAU(0): nv50_output_mode_valid is called. > (II) NOUVEAU(0): nv50_output_mode_valid is called. > (II) NOUVEAU(0): nv50_output_mode_valid is called. > (II) NOUVEAU(0): Output DVI-0 disconnected > (II) NOUVEAU(0): Output DVI-1 connected > (II) NOUVEAU(0): Using exact sizes for initial modes > (II) NOUVEAU(0): Output DVI-1 using initial mode 1024x768 > (--) NOUVEAU(0): VideoRAM: 262144 kBytes > (=3D=3D) NOUVEAU(0): Using gamma correction (1.0, 1.0, 1.0) > (--) NOUVEAU(0): Virtual size is 1280x1280 (pitch 1280) > (**) NOUVEAU(0): Driver mode "1024x768": 94.5 MHz (scaled from 0.0 MHz),= 68.7 kHz, 85.0 Hz > (II) NOUVEAU(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 7= 68 769 772 808 +hsync +vsync (68.7 kHz) > (**) NOUVEAU(0): Default mode "1280x1024": 108.0 MHz (scaled from 0.0 MH= z), 64.0 kHz, 60.0 Hz > (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 = 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) > (**) NOUVEAU(0): Default mode "1280x960": 108.0 MHz (scaled from 0.0 MHz= ), 60.0 kHz, 60.0 Hz > (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 9= 60 961 964 1000 +hsync +vsync (60.0 kHz) > (**) NOUVEAU(0): Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz)= , 67.5 kHz, 75.0 Hz > (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 8= 64 865 868 900 +hsync +vsync (67.5 kHz) > (**) NOUVEAU(0): Default mode "1024x768": 94.5 MHz (scaled from 0.0 MHz)= , 68.7 kHz, 85.0 Hz > (II) NOUVEAU(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 7= 68 769 772 808 +hsync +vsync (68.7 kHz) > (**) NOUVEAU(0): Driver mode "1024x768": 94.4 MHz (scaled from 0.0 MHz),= 68.6 kHz, 85.0 Hz > (II) NOUVEAU(0): Modeline "1024x768"x85.0 94.39 1024 1088 1200 1376 7= 68 769 772 807 -hsync +vsync (68.6 kHz) > (**) NOUVEAU(0): Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz),= 60.1 kHz, 75.1 Hz > (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 7= 68 769 772 800 +hsync +vsync (60.1 kHz) > (**) NOUVEAU(0): Default mode "1024x768": 78.8 MHz (scaled from 0.0 MHz)= , 60.0 kHz, 75.0 Hz > (II) NOUVEAU(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 7= 68 769 772 800 +hsync +vsync (60.0 kHz) > (**) NOUVEAU(0): Driver mode "1024x768": 75.0 MHz (scaled from 0.0 MHz),= 56.5 kHz, 70.1 Hz > (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 7= 68 771 777 806 -hsync -vsync (56.5 kHz) > (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz),= 48.4 kHz, 60.0 Hz > (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 7= 68 771 777 806 -hsync -vsync (48.4 kHz) > (**) NOUVEAU(0): Driver mode "1024x768": 44.9 MHz (scaled from 0.0 MHz),= 35.5 kHz, 87.0 Hz (I) > (II) NOUVEAU(0): Modeline "1024x768"x87.0 44.90 1024 1032 1208 1264 7= 68 768 776 817 interlace +hsync +vsync (35.5 kHz) > (**) NOUVEAU(0): Driver mode "832x624": 57.3 MHz (scaled from 0.0 MHz), = 49.7 kHz, 74.6 Hz > (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 6= 25 628 667 -hsync -vsync (49.7 kHz) > (**) NOUVEAU(0): Driver mode "800x600": 56.5 MHz (scaled from 0.0 MHz), = 53.5 kHz, 85.0 Hz > (II) NOUVEAU(0): Modeline "800x600"x85.0 56.55 800 840 928 1056 600 6= 01 604 630 -hsync +vsync (53.5 kHz) > (**) NOUVEAU(0): Default mode "800x600": 56.3 MHz (scaled from 0.0 MHz),= 53.7 kHz, 85.1 Hz > (II) NOUVEAU(0): Modeline "800x600"x85.1 56.30 800 832 896 1048 600 6= 01 604 631 +hsync +vsync (53.7 kHz) > (**) NOUVEAU(0): Driver mode "800x600": 50.0 MHz (scaled from 0.0 MHz), = 48.1 kHz, 72.2 Hz > (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 6= 37 643 666 +hsync +vsync (48.1 kHz) > (**) NOUVEAU(0): Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), = 46.9 kHz, 75.0 Hz > (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 6= 01 604 625 +hsync +vsync (46.9 kHz) > (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), = 37.9 kHz, 60.3 Hz > (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 6= 01 605 628 +hsync +vsync (37.9 kHz) > (**) NOUVEAU(0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), = 35.2 kHz, 56.2 Hz > (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 6= 01 603 625 +hsync +vsync (35.2 kHz) > (**) NOUVEAU(0): Default mode "700x525": 61.0 MHz (scaled from 0.0 MHz),= 64.9 kHz, 60.0 Hz (D) > (II) NOUVEAU(0): Modeline "700x525"x60.0 61.00 700 744 820 940 525 52= 6 532 541 doublescan +hsync +vsync (64.9 kHz) > (**) NOUVEAU(0): Default mode "640x512": 54.0 MHz (scaled from 0.0 MHz),= 64.0 kHz, 60.0 Hz (D) > (II) NOUVEAU(0): Modeline "640x512"x60.0 54.00 640 664 720 844 512 51= 2 514 533 doublescan +hsync +vsync (64.0 kHz) > (**) NOUVEAU(0): Default mode "640x480": 54.0 MHz (scaled from 0.0 MHz),= 60.0 kHz, 60.0 Hz (D) > (II) NOUVEAU(0): Modeline "640x480"x60.0 54.00 640 688 744 900 480 48= 0 482 500 doublescan +hsync +vsync (60.0 kHz) > (**) NOUVEAU(0): Default mode "640x480": 36.0 MHz (scaled from 0.0 MHz),= 43.3 kHz, 85.0 Hz > (II) NOUVEAU(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 48= 1 484 509 -hsync -vsync (43.3 kHz) > (**) NOUVEAU(0): Driver mode "640x480": 35.7 MHz (scaled from 0.0 MHz), = 42.9 kHz, 85.0 Hz > (II) NOUVEAU(0): Modeline "640x480"x85.0 35.71 640 672 736 832 480 48= 1 484 505 -hsync +vsync (42.9 kHz) > (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), = 37.5 kHz, 75.0 Hz > (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 48= 1 484 500 -hsync -vsync (37.5 kHz) > (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), = 37.9 kHz, 72.8 Hz > (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 48= 9 491 520 -hsync -vsync (37.9 kHz) > (**) NOUVEAU(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz),= 37.9 kHz, 72.8 Hz > (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 48= 9 492 520 -hsync -vsync (37.9 kHz) > (**) NOUVEAU(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz),= 37.5 kHz, 75.0 Hz > (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 48= 1 484 500 -hsync -vsync (37.5 kHz) > (**) NOUVEAU(0): Driver mode "640x480": 30.2 MHz (scaled from 0.0 MHz), = 35.0 kHz, 66.7 Hz > (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 48= 3 486 525 -hsync -vsync (35.0 kHz) > (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), = 31.5 kHz, 60.0 Hz > (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 49= 0 492 525 -hsync -vsync (31.5 kHz) > (**) NOUVEAU(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz),= 31.5 kHz, 59.9 Hz > (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 49= 0 492 525 -hsync -vsync (31.5 kHz) > (**) NOUVEAU(0): Driver mode "720x400": 35.5 MHz (scaled from 0.0 MHz), = 39.4 kHz, 87.8 Hz > (II) NOUVEAU(0): Modeline "720x400"x87.8 35.50 720 738 846 900 400 42= 1 423 449 -hsync -vsync (39.4 kHz) > (**) NOUVEAU(0): Default mode "720x400": 35.5 MHz (scaled from 0.0 MHz),= 37.9 kHz, 85.0 Hz > (II) NOUVEAU(0): Modeline "720x400"x85.0 35.50 720 756 828 936 400 40= 1 404 446 -hsync +vsync (37.9 kHz) > (**) NOUVEAU(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), = 31.5 kHz, 70.1 Hz > (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 41= 2 414 449 -hsync +vsync (31.5 kHz) > (**) NOUVEAU(0): Default mode "640x400": 31.5 MHz (scaled from 0.0 MHz),= 37.9 kHz, 85.1 Hz > (II) NOUVEAU(0): Modeline "640x400"x85.1 31.50 640 672 736 832 400 40= 1 404 445 -hsync +vsync (37.9 kHz) > (**) NOUVEAU(0): Default mode "576x432": 54.0 MHz (scaled from 0.0 MHz),= 67.5 kHz, 75.0 Hz (D) > (II) NOUVEAU(0): Modeline "576x432"x75.0 54.00 576 608 672 800 432 43= 2 434 450 doublescan +hsync +vsync (67.5 kHz) > (**) NOUVEAU(0): Default mode "640x350": 31.5 MHz (scaled from 0.0 MHz),= 37.9 kHz, 85.1 Hz > (II) NOUVEAU(0): Modeline "640x350"x85.1 31.50 640 672 736 832 350 38= 2 385 445 +hsync -vsync (37.9 kHz) > (**) NOUVEAU(0): Default mode "512x384": 47.2 MHz (scaled from 0.0 MHz),= 68.7 kHz, 85.0 Hz (D) > (II) NOUVEAU(0): Modeline "512x384"x85.0 47.25 512 536 584 688 384 38= 4 386 404 doublescan +hsync +vsync (68.7 kHz) > (**) NOUVEAU(0): Default mode "512x384": 39.4 MHz (scaled from 0.0 MHz),= 60.0 kHz, 75.0 Hz (D) > (II) NOUVEAU(0): Modeline "512x384"x75.0 39.38 512 520 568 656 384 38= 4 386 400 doublescan +hsync +vsync (60.0 kHz) > (**) NOUVEAU(0): Default mode "512x384": 37.5 MHz (scaled from 0.0 MHz),= 56.5 kHz, 70.1 Hz (D) > (II) NOUVEAU(0): Modeline "512x384"x70.1 37.50 512 524 592 664 384 38= 5 388 403 doublescan -hsync -vsync (56.5 kHz) > (**) NOUVEAU(0): Default mode "512x384": 32.5 MHz (scaled from 0.0 MHz),= 48.4 kHz, 60.0 Hz (D) > (II) NOUVEAU(0): Modeline "512x384"x60.0 32.50 512 524 592 672 384 38= 5 388 403 doublescan -hsync -vsync (48.4 kHz) > (**) NOUVEAU(0): Default mode "416x312": 28.6 MHz (scaled from 0.0 MHz),= 49.7 kHz, 74.7 Hz (D) > (II) NOUVEAU(0): Modeline "416x312"x74.7 28.64 416 432 464 576 312 31= 2 314 333 doublescan -hsync -vsync (49.7 kHz) > (**) NOUVEAU(0): Default mode "400x300": 28.1 MHz (scaled from 0.0 MHz),= 53.7 kHz, 85.3 Hz (D) > (II) NOUVEAU(0): Modeline "400x300"x85.3 28.15 400 416 448 524 300 30= 0 302 315 doublescan +hsync +vsync (53.7 kHz) > (**) NOUVEAU(0): Default mode "400x300": 25.0 MHz (scaled from 0.0 MHz),= 48.1 kHz, 72.2 Hz (D) > (II) NOUVEAU(0): Modeline "400x300"x72.2 25.00 400 428 488 520 300 31= 8 321 333 doublescan +hsync +vsync (48.1 kHz) > (=3D=3D) NOUVEAU(0): DPI set to (96, 96) > (II) Loading sub module "fb" > (II) LoadModule: "fb" >=20 > (II) Loading /usr/local/lib/xorg/modules//libfb.so > (II) Module fb: vendor=3D"X.Org Foundation" > compiled for 1.5.3, module version =3D 1.0.0 > ABI class: X.Org ANSI C Emulation, version 0.4 > (II) Loading sub module "exa" > (II) LoadModule: "exa" >=20 > (II) Loading /usr/local/lib/xorg/modules//libexa.so > (II) Module exa: vendor=3D"X.Org Foundation" > compiled for 1.5.3, module version =3D 2.4.0 > ABI class: X.Org Video Driver, version 4.1 > (II) Loading sub module "shadowfb" > (II) LoadModule: "shadowfb" >=20 > (II) Loading /usr/local/lib/xorg/modules//libshadowfb.so > (II) Module shadowfb: vendor=3D"X.Org Foundation" > compiled for 1.5.3, module version =3D 1.0.0 > ABI class: X.Org ANSI C Emulation, version 0.4 > (--) Depth 24 pixmap format is 32 bpp > (II) do I need RAC? No, I don't. > (II) resource ranges after preInit: > [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > (=3D=3D) NOUVEAU(0): Write-combining range (0xa0000,0x10000) was already = clear > (II) NOUVEAU(0): Allocated 128MiB VRAM for framebuffer + offscreen pixmap= s, at offset 0x20000000 > (II) NOUVEAU(0): AGPGART: 512MiB available > (EE) NOUVEAU(0): Unable to allocate GART memory Yes, this appears to be the first patchset, which can't allocate the GART on nv50. robert. > (II) NOUVEAU(0): [drm] Using the DRM lock SAREA also for drawables. > (II) NOUVEAU(0): [drm] framebuffer handle =3D 0xd0000000 > (II) NOUVEAU(0): [drm] added 1 reserved context for kernel > (II) NOUVEAU(0): X context handle =3D 0x1 > (II) NOUVEAU(0): [drm] installed DRM signal handler --=20 Robert Noland <rnoland@FreeBSD.org> FreeBSD --=-goKhQA6BjR3Dt1NXN3br Content-Type: application/pgp-signature; name="signature.asc" Content-Description: This is a digitally signed message part -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.11 (FreeBSD) iEYEABECAAYFAknKZrEACgkQM4TrQ4qfROPK5ACbBed6JMjFXt9DLwkrlx+09hFL 7bgAoILOgCvrI8M8T+m7hh0QearHNw34 =NEva -----END PGP SIGNATURE----- --=-goKhQA6BjR3Dt1NXN3br--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1238001329.1828.16.camel>