Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 20 May 2009 19:42:38 -0400
From:      Boris Kochergin <spawk@acm.poly.edu>
To:        Nenhum_de_Nos <matheus@eternamente.info>
Cc:        freebsd-current@freebsd.org
Subject:   Re: is my slow for this ? hostap related
Message-ID:  <4A14956E.2040608@acm.poly.edu>
In-Reply-To: <4a36be1c432cfacf71ffa75ce3abbdd0.squirrel@10.1.1.10>
References:  <726e1882eb2ec94370bfec1666ec20f2.squirrel@10.1.1.10>	<200905201227.46674.mel.flynn%2Bfbsd.current@mailing.thruhere.net> <4a36be1c432cfacf71ffa75ce3abbdd0.squirrel@10.1.1.10>

next in thread | previous in thread | raw e-mail | index | archive | help
Nenhum_de_Nos wrote:
> On Wed, May 20, 2009 07:27, Mel Flynn wrote:
>   
>> Hi Nenhum,
>>
>> On Monday 18 May 2009 01:08:09 Nenhum_de_Nos wrote:
>>
>>     
>>> I have an atheros wlan card:
>>>
>>> ath0@pci0:0:11:0:       class=0x020000 card=0x3a131186 chip=0x0013168c
>>> rev=0x01 hdr=0x00
>>>     vendor     = 'Atheros Communications Inc.'
>>>     device     = 'AR5212, AR5213 802.11a/b/g Wireless Adapter'
>>>     class      = network
>>>     subclass   = ethernet
>>>       
>> <snip>
>>
>>     
>>> May 17 13:19:36 floyd kernel: ath0: stuck beacon; resetting (bmiss count
>>> 4)
>>> May 17 13:20:07 floyd last message repeated 89 times
>>> May 17 13:22:08 floyd last message repeated 376 times
>>>
>>> I've read this:
>>>
>>> http://www.nabble.com/ath0:-stuck-beacon--resetting-(bmiss-count-4)-td22359
>>> 155.html
>>>
>>> and I'm thinking my pc is slow for the job, as said.
>>>
>>> floyd# cat dmesg.today
>>> Copyright (c) 1992-2009 The FreeBSD Project.
>>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>>> 	The Regents of the University of California. All rights reserved.
>>> FreeBSD is a registered trademark of The FreeBSD Foundation.
>>> FreeBSD 8.0-CURRENT #0: Tue May  5 23:08:28 BRT 2009
>>>     root@floyd.apartnet:/usr/obj/usr/src/sys/Floyd8
>>> WARNING: WITNESS option enabled, expect reduced performance.
>>>       
>>                                    ^^^^^^^^^^^^^^^^^^^^^^^^^^
>>
>> Read /usr/src/UPDATING about WITNESS options and which to delete from
>> GENERIC
>>     
>
> I did, both read and recompile ... no good.
>
> I put:
> ral0@pci0:0:11:0:	class=0x028000 card=0x3a711186 chip=0x03021814 rev=0x00
> hdr=0x00
>     vendor     = 'Ralink Technology, Corp'
>     device     = 'RT2525 2.4GHz transceiver + RT2560 MAC/BBP wireless a/b'
>     class      = network
>
> on there, no good also. is slow in the beginning, and then dies forever.
>
> I tried on a 950MHz duron and got the same results (atheros card only).
> unfortunately I can't test this duron anymore as it died from bad PSU.
>
> what made atheros happy was a Core 2 Duo, 2.66GHz at work. faster
> downloads and no even one of those lines :(
>
> too bad I just have an AthlonXP I can use as AP :(
> and soekris in future would be a way, now I think is slow as well ...
>
> thanks,
>
> matheus
>
>   
>> kernel. I think once you turn those options off, your machine should be
>> able
>> to handle this, though I wouldn't run anything else on it. On a single
>> 1.8Ghz
>> 686, I got these occasionally, when backups were done over gigabit and a
>> movie
>> was playing on it. I've since reconfigured the machine as dedicated media
>> server and replaced the router with a headless 3Ghz 686, also running
>> squid.
>> This is overkill for my home network, though.
>> --
>> Mel
>>
>>     
>
>
>   
I don't think your CPU is at fault. While I don't have any Crusoes, I 
have several machines, ranging from Pentiums running at 200 MHz to 
Pentium IIIs running at 933 MHz, with AR5212 cards in them. They run 
7.0-, 7.1-, and 7.2-RELEASE. While I do get some "stuck beacon" and 
"device timeout" messages on them, they can all push at least 2 MB/s on 
the AR5212 cards, and I am assuming that your Crusoe is faster than a 
Pentium 200.

-Boris



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4A14956E.2040608>