Date: Sat, 25 Aug 2001 02:28:24 -0700 From: "Ted Mittelstaedt" <tedm@toybox.placo.com> To: "steven r. eastlake" <seastlake@gci.net>, <freebsd-questions@FreeBSD.ORG> Subject: RE: support Message-ID: <002d01c12d48$4a0325a0$1401a8c0@tedm.placo.com> In-Reply-To: <5.1.0.14.0.20010824143212.009e8b30@mail.gci.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Try booting DOS - if the MSD utility does not see your modem, then you most likely have a winmodem,, regardless of what the salespeople told you. Ted Mittelstaedt tedm@toybox.placo.com Author of: The FreeBSD Corporate Networker's Guide Book website: http://www.freebsd-corp-net-guide.com >-----Original Message----- >From: owner-freebsd-questions@FreeBSD.ORG >[mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of steven r. >eastlake >Sent: Friday, August 24, 2001 2:34 PM >To: freebsd-questions@FreeBSD.ORG >Subject: Fwd: support > > > >>Date: Thu, 23 Aug 2001 14:38:12 -0700 >>To: freebsd-questions@FreeBSD.ORG >>From: "steven r. eastlake" <seastlake@gci.net> >>Subject: support >> >> >> thank you in advance for any help provided... >> i have a 3com 56k pci modem, not a winmodem, how do i >> make freeBSD 4.0 see this as one of the serial devices... >> com1 presently has a mouse attached, no other physical com ports... >> thanks again... > > > follow-up to the previously sent email above, here is dmesg for >above system... > >Copyright (c) 1992-2000 The FreeBSD Project. >Copyright (c) 1982, 1986, 1989, 1991, 1993 > The Regents of the University of California. All rights reserved. >FreeBSD 4.0-RELEASE #1: Fri Aug 24 13:18:17 AKDT 2001 > root@bsd:/usr/src/sys/compile/SREX >Timecounter "i8254" frequency 1193182 Hz >CPU: Pentium/P54C (133.27-MHz 586-class CPU) > Origin = "GenuineIntel" Id = 0x52c Stepping = 12 > Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8> >real memory = 50331648 (49152K bytes) >avail memory = 45686784 (44616K bytes) >Preloaded elf kernel "kernel" at 0xc0319000. >Preloaded elf module "splash_bmp.ko" at 0xc031909c. >Preloaded splash_image_data "/boot/splash.bmp" at 0xc0319140. >Intel Pentium detected, installing workaround for F00F bug >md0: Malloc disk >npx0: <math processor> on motherboard >npx0: INT 16 interface >pcib0: <Host to PCI bridge> on motherboard >pci0: <PCI bus> on pcib0 >isab0: <Intel 82371SB PCI to ISA bridge> at device 7.0 on pci0 >isa0: <ISA bus> on isab0 >atapci0: <Intel PIIX3 ATA controller> port 0xf000-0xf00f at device >7.1 on pci0 >ata0: at 0x1f0 irq 14 on atapci0 >ata1: at 0x170 irq 15 on atapci0 >pci0: <unknown card> (vendor=0x12b9, dev=0x1008) at 13.0 irq 10 >pci0: <SiS 6326 SVGA controller> at 14.0 >pci0: <unknown card> (vendor=0x4005, dev=0x4000) at 15.0 irq 11 >fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 >fdc0: FIFO enabled, 8 bytes threshold >fd0: <1440-KB 3.5" drive> on fdc0 drive 0 >atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0 >atkbd0: <AT Keyboard> irq 1 on atkbdc0 >vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 >sc0: <System console> on isa0 >sc0: VGA <16 virtual consoles, flags=0x200> >sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 >sio0: type 16550A >ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 >ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode >plip0: <PLIP network interface> on ppbus0 >lpt0: <Printer> on ppbus0 >lpt0: Interrupt-driven port >ppi0: <Parallel I/O> on ppbus0 >ad0: 8063MB <FUJITSU MPD3084AT> [16383/16/63] at ata0-master using WDMA2 >ad2: 12971MB <WDC WD136AA-35BAA0> [26354/16/63] at ata1-master using WDMA2 >acd0: CD-RW <SONY CD-RW CRX0811> at ata0-slave using PIO4 >Mounting root from ufs:/dev/ad2s1a > > >To Unsubscribe: send mail to majordomo@FreeBSD.org >with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?002d01c12d48$4a0325a0$1401a8c0>