Date: Fri, 14 Dec 2012 22:03:09 +0000 From: Srinivasa Kanduru <SKanduru@a10networks.com> To: olli hauer <ohauer@gmx.de>, "apache@FreeBSD.org" <apache@FreeBSD.org> Subject: RE: apache installation failed Message-ID: <4ACB26D93525C544864D91BE088FDC0D51E721@SJ-MB02.corp.a10networks.com> In-Reply-To: <50C87A75.6070207@gmx.de> References: <4ACB26D93525C544864D91BE088FDC0D51E260@SJ-MB02.corp.a10networks.com> <50C85AFB.4070902@gmx.de> <4ACB26D93525C544864D91BE088FDC0D51E29B@SJ-MB02.corp.a10networks.com> <50C87A75.6070207@gmx.de>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi Olli, Finally I got this to work. The instructions you gave was very useful. Thanks again ! Regards, Srinivas. > -----Original Message----- > From: olli hauer [mailto:ohauer@gmx.de] > Sent: Wednesday, December 12, 2012 4:37 AM > To: apache@FreeBSD.org > Cc: Srinivasa Kanduru > Subject: Re: apache installation failed >=20 > On 2012-12-12 11:28, Srinivasa Kanduru wrote: > > Hi Olli, > > > > Thanks for the quick response. I have added three packages under net f= or > TAHI testing. I did configuration for that as well. Do I have to reinst= all and re- > configure them as well ? > > > > I was wondering if that is not required if basic perl modules will not = change > with the new ports package. Please advice. > > > > Thanks again. > > Regards, > > Srinivas. > > >=20 > Hi Srinivas, >=20 > hard to tell since I don't know where the the files are located > (/usr/local/lib/perl5/5.12.x, /usr/local/lib/perl5/site_perl/5.12.x > or somewhere else if not from the ports system) >=20 > Hint: > If you go with ports and do a 'make configure' inside a port, the configu= ration > will be saved in /var/db/ports/$portname/options and reused the next time > you build the port. You don't have to configure the port again except con= fig > options inside the port Makefile was changed. >=20 > -- > Regards, > olli >=20 >=20 >=20 >=20 > > > >> -----Original Message----- > >> From: olli hauer [mailto:ohauer@gmx.de] > >> Sent: Wednesday, December 12, 2012 2:23 AM > >> To: apache@FreeBSD.org > >> Cc: Srinivasa Kanduru > >> Subject: Re: apache installation failed > >> > >> On 2012-12-12 08:07, Srinivasa Kanduru wrote:> Hello, > >>> > >>> I was trying to setup IPv6 TAHI test-suites on FreeBSD 9.0 for IPv6 > >> conformance certification . > >>> > >>> I got the following error when I was trying to install apache 20 as > >>> well as 22 > >> from the ports directory. The package installer suggested to attach > >> the following information for your perusal. > >>> > >>> I would appreciate if you can let me know if there is anything wrong > >>> in my > >> setup. > >>> > >>> Thanks a lot for your help. > >>> > >>> Regards, > >>> Srinivas. > >>> > >>> =3D=3D=3D> Script "configure" failed unexpectedly. > >>> Please report the problem to apache@FreeBSD.org [maintainer] and > >>> attach the "/usr/ports/www/apache20/work/httpd-2.0.64/config.log" > >>> including the output of the failure of your make command. Also, it > >>> might be a good idea to provide an overview of all packages > >>> installed on your system (e.g. an `ls /var/db/pkg`). > >>> > >>> [root@tahi-ipv6 apache20]#ls /var/db/pkg > >>> apr-0.9.20.0.9.19 kbproto-1.0.5 > >>> apr-ipv6-gdbm-db42-1.4.5.1.3.12_1 libiconv-1.13.1_1 > >>> autoconf-2.68 libsigsegv-2.10 > >>> autoconf-wrapper-20101119 libtool-2.4_1 > >>> automake-1.11.1 m4-1.4.16,1 > >>> automake-wrapper-20101119 p5-Expect-1.21 > >>> bash-4.1.11 p5-IO-Tty-1.10 > >>> bison-2.4.3,1 p5-Locale-gettext-1.05_3 > >>> ct-2.1.2 pcre-8.20 > >>> db42-4.2.52_5 perl-5.12.4_3 > >>> elinks-0.11.7_2 python27-2.7.2_3 > >>> expat-2.0.1_2 screen-4.0.3_13 > >>> gdbm-1.9.1 v6eval-3.3.2 > >>> gettext-0.18.1.1 v6eval-remotes-3.0 > >>> gmake-3.82 vim-lite-7.3.121 > >>> help2man-1.40.4 > >>> > >> > >> Hi Srinivas, > >> > >> first your ports tree is really outdated, apache20 and apr0 was > >> removed from the portstree in Aug. > >> > >> From your pkg listing I see apr0 and apr1 are installed you have to > >> remove > >> apr0 first. I suspect you are using the older pkg tools so the > >> command `pkg_delete -rx apr' should work. > >> > >> Next > >> $> cd ports/devel/apr1 > >> $> make config (select at last THREADS, IPV6 and DEVRANDOM) $> make > >> clean install > >> > >> $> cd ports/www/apache22/ > >> $> make config > >> $> make clean install > >> > >> You apache build was failing because mod_auth_digest failed to build, > >> but from the log snippet it is not clear to me why. > >> > >> I highly suggest to update your ports with portsnap and start over > >> with no ports installed (I suspect you have a fast machine) > >> > >> To start over do the following. > >> $> mv /usr/ports /usr/ports.old > >> $> portsnap fetch > >> $> portsnap extract > >> $> mkdir ports/distfiles (so distfiles are placed here and not in the > >> port > >> directory) $> pkg_delete -a (removes all your installed ports) $> cd > >> ports/lang/perl5.14 (or perl5.16) $> make install $> cd > >> ports/lang/python27 $> make install $> cd ports/devel/apr1 $> make > >> config (select at last THREADS, IPV6 and DEVRANDOM) $> make install > >> $> cd > >> ports/www/apache22 $> make config && make install > >> > >> -- > >> Regards, > >> olli > > _______________________________________________ > > freebsd-apache@freebsd.org mailing list > > http://lists.freebsd.org/mailman/listinfo/freebsd-apache > > To unsubscribe, send any mail to "freebsd-apache- > unsubscribe@freebsd.org" > > > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4ACB26D93525C544864D91BE088FDC0D51E721>