Date: Thu, 09 Jan 2014 09:29:01 +0200 From: Alexandr <shuriku@shurik.kiev.ua> To: Maciej Milewski <milu@dat.pl>, Adrian Chadd <adrian@freebsd.org> Cc: "freebsd-wireless@freebsd.org" <freebsd-wireless@freebsd.org> Subject: Re: Problem connecting to AP Message-ID: <52CE4FBD.3060208@shurik.kiev.ua> In-Reply-To: <52CE4E00.3060102@shurik.kiev.ua> References: <52CAB6F2.3010707@shurik.kiev.ua> <CAJ-Vmok0JFLBemBOrB0YUnJ0OkJQEwuh1Mg75W52zWxXYrDpvg@mail.gmail.com> <52CABD82.2070106@shurik.kiev.ua> <52CBFFD3.1080504@dat.pl> <52CE4E00.3060102@shurik.kiev.ua>
next in thread | previous in thread | raw e-mail | index | archive | help
By the way, it connects to my work Cisco and Linksys AP's (but only 11g)
without any problems...
09.01.2014 09:21, Alexandr пишет:
> No, wpa_passphrase didn't help me.
>
> 07.01.2014 15:23, Maciej Milewski пишет:
>> On 06.01.2014 15:28, Alexandr wrote:
>>> I simply changed key in this listing to "secret". Yes, I tried a very
>>> simple configuration, no luck:
>>>
>>> network={
>>> ssid="door"
>>> psk="secret"
>>> }
>> Try using wpa_passphrase:
>> man wpa_passphrase.
>> It should create correct psk.
>>
>>> 06.01.2014 16:24, Adrian Chadd пишет:
>>>> The passphrase 'secret' is too short for WPA.
>>>>
>>>> I gather it's not _that_, but is it long enough to meet WPA reuirements?
>>>>
>>>> Have you tried removing the proto= and bssid lines? You don't strictly
>>>> need them.
>>>>
>>>> Thanks!
>>>>
>>>> -a
>>>>
>>>>
>>>> On 6 January 2014 06:00, Alexandr <shuriku@shurik.kiev.ua> wrote:
>>>>> Hello,
>>>>>
>>>>> I recently upgraded system on my laptop to current with a hope to get my
>>>>> wireless card working. Now it successfully recognized by kernel:
>>>>>
>>>>> iwn0: <Intel Centrino Wireless-N 2230> mem 0xf2d00000-0xf2d01fff irq 17
>>>>> at device 0.0 on pci3
>>>>>
>>>>> Unfortunately, I can't connect to my home access point:
>>>>>
>>>>> wpa_supplicant[519]: wlan0: CTRL-EVENT-DISCONNECTED
>>>>> bssid=54:e6:fc:e4:48:c4 reason=0
>>>>> wpa_supplicant[519]: wlan0: WPA: 4-Way Handshake failed - pre-shared key
>>>>> may be incorrect
>>>>> wpa_supplicant[519]: wlan0: CTRL-EVENT-SSID-TEMP-DISABLED id=0
>>>>> ssid="door" auth_failures=10 duration=30
>>>>>
>>>>> I tried different security settings (WPA-WPA2 + AES-TKIP), wireless
>>>>> modes, radio channels on my access point, the same error.
>>>>>
>>>>> # ifconfig wlan0
>>>>> wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
>>>>> ether 68:5d:43:92:3a:88
>>>>> nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
>>>>> media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
>>>>> status: no carrier
>>>>> ssid door channel 1 (2412 MHz 11g ht/40+)
>>>>> country US authmode WPA2/802.11i privacy ON deftxkey UNDEF
>>>>> txpower 13
>>>>> bmiss 10 scanvalid 60 bgscan bgscanintvl 300 bgscanidle 250
>>>>> roam:rssi 7 roam:rate 64 protmode CTS ampdulimit 8k -amsdutx amsdurx
>>>>> shortgi wme roaming MANUAL
>>>>>
>>>>> /etc/wpa_supplicant.conf:
>>>>>
>>>>> ctrl_interface=/var/run/wpa_supplicant
>>>>> ctrl_interface_group=wheel
>>>>> eapol_version=2
>>>>>
>>>>> network={
>>>>> ssid="door"
>>>>> bssid=54:e6:fc:e4:48:c4
>>>>> key_mgmt=WPA-PSK
>>>>> proto=WPA RSN
>>>>> psk="secret"
>>>>> }
>>>>>
>>>>>
>>>>> Other home devices connets to AP without problems. Can you point me how
>>>>> I can debug it?
>>>>>
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> freebsd-wireless@freebsd.org mailing list
>>>>> http://lists.freebsd.org/mailman/listinfo/freebsd-wireless
>>>>> To unsubscribe, send any mail to "freebsd-wireless-unsubscribe@freebsd.org"
>>> _______________________________________________
>>> freebsd-wireless@freebsd.org mailing list
>>> http://lists.freebsd.org/mailman/listinfo/freebsd-wireless
>>> To unsubscribe, send any mail to "freebsd-wireless-unsubscribe@freebsd.org"
> _______________________________________________
> freebsd-wireless@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-wireless
> To unsubscribe, send any mail to "freebsd-wireless-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?52CE4FBD.3060208>