Date: Mon, 18 May 2015 01:00:56 -0700 From: Adrian Chadd <adrian@freebsd.org> To: Piotr Kubaj <pkubaj@riseup.net> Cc: "freebsd-mips@freebsd.org" <freebsd-mips@freebsd.org> Subject: Re: Updates to freebsd-wifi-build Message-ID: <CAJ-VmomopTnBWo64xT5HhHfifzNo0i00BgXJRnrZ=a9HZPkr6g@mail.gmail.com> In-Reply-To: <5559990D.50703@riseup.net> References: <5559990D.50703@riseup.net>
next in thread | previous in thread | raw e-mail | index | archive | help
We should support all the hardware on there. Someone just has to figure out how to get it to work and glue whatever magic NAND stuff is required. I think someone wrote the hacky NAND hardware driver needed for that board. I just haven't played with it myself at all :( -a On 18 May 2015 at 00:47, Piotr Kubaj <pkubaj@riseup.net> wrote: > Hi, thanks for the effort, it's nice to see FreeBSD progress also on > MIPS. Are you going somewhen in the future make something like > release-arm-redux for MIPS? > > Also, two years ago I asked about getting Mikrotik RB751G-2HnD to work > with FreeBSD ( > https://lists.freebsd.org/pipermail/freebsd-mips/2013-May/002783.html ). > I now happily run OpenWRT on it, but would switch to FreeBSD, if > possible. Is there any hope about that? Below is my dmesg: > [ 0.000000] Linux version 3.10.49 (bb@builder1) (gcc version 4.8.3 > (OpenWrt/Linaro GCC 4.8-2014.04 r42625) ) #5 Wed Oct 1 14:15:03 CEST 2014 > [ 0.000000] bootconsole [early0] enabled > [ 0.000000] CPU revision is: 00019374 (MIPS 24Kc) > [ 0.000000] SoC: Atheros AR7242 rev 1 > [ 0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, > Ref:5.000MHz > [ 0.000000] Determined physical RAM map: > [ 0.000000] memory: 04000000 @ 00000000 (usable) > [ 0.000000] User-defined physical RAM map: > [ 0.000000] memory: 04000000 @ 00000000 (usable) > [ 0.000000] Initrd not found or empty - disabling initrd > [ 0.000000] Zone ranges: > [ 0.000000] Normal [mem 0x00000000-0x03ffffff] > [ 0.000000] Movable zone start for each node > [ 0.000000] Early memory node ranges > [ 0.000000] node 0: [mem 0x00000000-0x03ffffff] > [ 0.000000] On node 0 totalpages: 16384 > [ 0.000000] free_area_init_node: node 0, pgdat 80326b60, node_mem_map > 81000000 > [ 0.000000] Normal zone: 128 pages used for memmap > [ 0.000000] Normal zone: 0 pages reserved > [ 0.000000] Normal zone: 16384 pages, LIFO batch:3 > [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 > bytes. > [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, > linesize 32 bytes > [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 > [ 0.000000] pcpu-alloc: [0] 0 > [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. > Total pages: 16256 > [ 0.000000] Kernel command line: no-uart parts=1 > boot_part_size=4194304 gpio=3911 HZ=200000000 mem=64M > kmac=00:0C:42:F9:A7:C8 board=751g ver=3.22 hw_opt=00000105 boot=1 mlc=8 > rootfstype=yaffs noinitrd > [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes) > [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) > [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) > [ 0.000000] Writing ErrCtl register=00000000 > [ 0.000000] Readback ErrCtl register=00000000 > [ 0.000000] Memory: 61148k/65536k available (2328k kernel code, 4388k > reserved, 634k data, 236k init, 0k highmem) > [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 > [ 0.000000] NR_IRQS:51 > [ 0.080000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104) > [ 0.080000] pid_max: default: 32768 minimum: 301 > [ 0.080000] Mount-cache hash table entries: 512 > [ 0.090000] NET: Registered protocol family 16 > [ 0.100000] MIPS: machine is MikroTik RouterBOARD 751G > [ 0.100000] ar71xx: pll_reg 0xb805002c: 0x62000000 > [ 0.340000] registering PCI controller with io_map_base unset > [ 0.350000] bio: create slab <bio-0> at 0 > [ 0.360000] PCI host bridge to bus 0000:00 > [ 0.360000] pci_bus 0000:00: root bus resource [mem > 0x10000000-0x13ffffff] > [ 0.370000] pci_bus 0000:00: root bus resource [io 0x0000] > [ 0.370000] pci_bus 0000:00: No busn resource found for root bus, > will use [bus 00-ff] > [ 0.380000] pci 0000:00:00.0: [168c:ff1c] type 00 class 0x020000 > [ 0.380000] pci 0000:00:00.0: fixup device configuration > [ 0.380000] pci 0000:00:00.0: reg 10: [mem 0x00000000-0x0000ffff 64bit] > [ 0.380000] pci 0000:00:00.0: supports D1 > [ 0.380000] pci 0000:00:00.0: PME# supported from D0 D1 D3hot > [ 0.380000] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00 > [ 0.380000] pci 0000:00:00.0: BAR 0: assigned [mem > 0x10000000-0x1000ffff 64bit] > [ 0.390000] pci 0000:00:00.0: using irq 40 for pin 1 > [ 0.390000] Switching to clocksource MIPS > [ 0.400000] NET: Registered protocol family 2 > [ 0.400000] TCP established hash table entries: 512 (order: 0, 4096 > bytes) > [ 0.410000] TCP bind hash table entries: 512 (order: -1, 2048 bytes) > [ 0.420000] TCP: Hash tables configured (established 512 bind 512) > [ 0.420000] TCP: reno registered > [ 0.430000] UDP hash table entries: 256 (order: 0, 4096 bytes) > [ 0.430000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) > [ 0.440000] NET: Registered protocol family 1 > [ 0.440000] PCI: CLS 0 bytes, default 32 > [ 0.470000] yaffs: yaffs built Sep 20 2014 23:09:53 Installing. > [ 0.470000] msgmni has been set to 119 > [ 0.470000] io scheduler noop registered > [ 0.470000] io scheduler deadline registered (default) > [ 0.480000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled > [ 0.510000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A > [ 0.520000] console [ttyS0] enabled, bootconsole disabled > [ 0.650000] NAND flash driver for the RouterBOARD 750 version 0.1.0 > [ 0.730000] NAND device: Manufacturer ID: 0x20, Chip ID: 0x76 (ST > Micro NAND 64MiB 3,3V 8-bit), 64MiB, page size: 512, OOB size: 16 > [ 0.870000] Scanning device for bad blocks > [ 1.010000] Bad eraseblock 3831 at 0x000003bdc000 > [ 1.070000] Creating 3 MTD partitions on "NAND 64MiB 3,3V 8-bit": > [ 1.140000] 0x000000000000-0x000000040000 : "booter" > [ 1.200000] 0x000000040000-0x000000400000 : "kernel" > [ 1.270000] 0x000000400000-0x000004000000 : "rootfs" > [ 1.330000] mtd: device 2 (rootfs) set to be root filesystem > [ 1.400000] mtdsplit: no squashfs found in "rootfs" > [ 1.450000] mtdsplit: no squashfs found in "NAND 64MiB 3,3V 8-bit" > [ 1.560000] switch0: Atheros AR8327 rev. 2 switch registered on > ag71xx-mdio.0 > [ 2.830000] libphy: ag71xx_mdio: probed > [ 3.430000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:00 > [uid=004dd033, driver=Atheros AR8216/AR8236/AR8316] > [ 3.560000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RGMII > [ 3.630000] TCP: cubic registered > [ 3.670000] NET: Registered protocol family 17 > [ 3.730000] Bridge firewalling registered > [ 3.780000] 8021q: 802.1Q VLAN Support v1.8 > [ 3.830000] yaffs: dev is 32505858 name is "mtdblock2" ro > [ 3.890000] yaffs: passed flags "" > [ 3.930000] yaffs: yaffs: Attempting MTD mount of 31.2,"mtdblock2" > [ 4.020000] yaffs: block 3576 is bad > [ 5.160000] yaffs: yaffs_read_super: is_checkpointed 0 > [ 5.160000] VFS: Mounted root (yaffs filesystem) readonly on device 31:2. > [ 5.240000] Freeing unused kernel memory: 236K (80345000 - 80380000) > [ 8.430000] eth0: link up (1000Mbps/Full duplex) > [ 9.680000] eth0: link down > [ 11.120000] NET: Registered protocol family 10 > [ 11.180000] sit: IPv6 over IPv4 tunneling driver > [ 11.270000] nf_conntrack version 0.5.0 (959 buckets, 3836 max) > [ 11.410000] ip6_tables: (C) 2000-2006 Netfilter Core Team > [ 11.490000] Loading modules backported from Linux version > master-2014-05-22-0-gf2032ea > [ 11.580000] Backport generated by backports.git > backports-20140320-37-g5c33da0 > [ 11.670000] ip_tables: (C) 2000-2006 Netfilter Core Team > [ 11.780000] xt_time: kernel timezone is -0000 > [ 11.870000] cfg80211: Calling CRDA to update world regulatory domain > [ 11.970000] cfg80211: World regulatory domain updated: > [ 12.030000] cfg80211: DFS Master region: unset > [ 12.090000] cfg80211: (start_freq - end_freq @ bandwidth), > (max_antenna_gain, max_eirp), (dfs_cac_time) > [ 12.200000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), > (N/A, 2000 mBm), (N/A) > [ 12.300000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), > (N/A, 2000 mBm), (N/A) > [ 12.390000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), > (N/A, 2000 mBm), (N/A) > [ 12.490000] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), > (N/A, 2000 mBm), (N/A) > [ 12.590000] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), > (N/A, 2000 mBm), (0 s) > [ 12.680000] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), > (N/A, 2000 mBm), (0 s) > [ 12.780000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), > (N/A, 2000 mBm), (N/A) > [ 12.880000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), > (N/A, 0 mBm), (N/A) > [ 13.090000] PPP generic driver version 2.4.2 > [ 13.140000] NET: Registered protocol family 24 > [ 13.290000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002) > [ 13.360000] ath: EEPROM regdomain: 0x0 > [ 13.360000] ath: EEPROM indicates default country code should be used > [ 13.360000] ath: doing EEPROM country->regdmn map search > [ 13.360000] ath: country maps to regdmn code: 0x3a > [ 13.360000] ath: Country alpha2 being used: US > [ 13.360000] ath: Regpair used: 0x3a > [ 13.380000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' > [ 13.390000] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xb0000000, irq=40 > [ 13.570000] cfg80211: Calling CRDA for country: US > [ 13.630000] cfg80211: Regulatory domain changed to country: US > [ 13.700000] cfg80211: DFS Master region: FCC > [ 13.750000] cfg80211: (start_freq - end_freq @ bandwidth), > (max_antenna_gain, max_eirp), (dfs_cac_time) > [ 13.860000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), > (N/A, 3000 mBm), (N/A) > [ 13.960000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), > (N/A, 1700 mBm), (N/A) > [ 14.050000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), > (N/A, 2300 mBm), (0 s) > [ 14.150000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), > (N/A, 3000 mBm), (N/A) > [ 14.250000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), > (N/A, 4000 mBm), (N/A) > [ 22.330000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready > [ 22.610000] IPv6: ADDRCONF(NETDEV_UP): eth0.1: link is not ready > [ 22.690000] eth0: link up (1000Mbps/Full duplex) > [ 22.910000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready > [ 23.000000] device eth0.1 entered promiscuous mode > [ 23.060000] device eth0 entered promiscuous mode > [ 23.230000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready > [ 23.300000] br-lan: port 1(eth0.1) entered forwarding state > [ 23.370000] br-lan: port 1(eth0.1) entered forwarding state > [ 24.780000] cfg80211: Calling CRDA to update world regulatory domain > [ 24.970000] cfg80211: Invalid regulatory domain detected: > [ 25.030000] cfg80211: Regulatory domain: 00 > [ 25.080000] cfg80211: (start_freq - end_freq @ bandwidth), > (max_antenna_gain, max_eirp), (dfs_cac_time) > [ 25.200000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), > (N/A, 2000 mBm), (N/A) > [ 25.290000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), > (N/A, 2000 mBm), (N/A) > [ 25.390000] br-lan: port 1(eth0.1) entered forwarding state > [ 25.450000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), > (N/A, 2000 mBm), (N/A) > [ 25.550000] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), > (N/A, 2000 mBm), (N/A) > [ 25.650000] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), > (N/A, 2000 mBm), (0 s) > [ 25.740000] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), > (N/A, 2000 mBm), (0 s) > [ 25.840000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), > (N/A, 2000 mBm), (N/A) > [ 25.940000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), > (N/A, 0 mBm), (N/A) > [ 26.160000] cfg80211: Calling CRDA to update world regulatory domain > [ 26.450000] cfg80211: World regulatory domain updated: > [ 26.510000] cfg80211: DFS Master region: unset > [ 26.560000] cfg80211: (start_freq - end_freq @ bandwidth), > (max_antenna_gain, max_eirp), (dfs_cac_time) > [ 26.680000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), > (N/A, 2000 mBm), (N/A) > [ 26.770000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), > (N/A, 2000 mBm), (N/A) > [ 26.870000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), > (N/A, 2000 mBm), (N/A) > [ 26.960000] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), > (N/A, 2000 mBm), (N/A) > [ 27.060000] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), > (N/A, 2000 mBm), (0 s) > [ 27.160000] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), > (N/A, 2000 mBm), (0 s) > [ 27.260000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), > (N/A, 2000 mBm), (N/A) > [ 27.350000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), > (N/A, 0 mBm), (N/A) > [ 28.440000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready > [ 28.570000] device wlan0 entered promiscuous mode > [ 30.340000] br-lan: port 2(wlan0) entered forwarding state > [ 30.400000] br-lan: port 2(wlan0) entered forwarding state > [ 30.470000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready > [ 32.400000] br-lan: port 2(wlan0) entered forwarding state >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAJ-VmomopTnBWo64xT5HhHfifzNo0i00BgXJRnrZ=a9HZPkr6g>