Date: Fri, 17 Feb 2006 23:27:15 +0300 From: Boris Samorodov <bsam@ipt.ru> To: Chuck Rock <carock@epconline.com> Cc: ports@FreeBSD.org, rob@debank.tv, Sam Lawrance <lawrance@FreeBSD.org> Subject: Re: FreeBSD Port: clamav-0.88 Message-ID: <72417468@srv.sem.ipt.ru> In-Reply-To: <5C486E0C-5242-45C7-8756-CA2FAAA41FF9@FreeBSD.org> (Sam Lawrance's message of "Sat, 18 Feb 2006 01:11:28 %2B1100") References: <20060217073023.A48425@kira.epconline.net> <5C486E0C-5242-45C7-8756-CA2FAAA41FF9@FreeBSD.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sat, 18 Feb 2006 01:11:28 +1100 Sam Lawrance wrote: > On 18/02/2006, at 12:38 AM, Chuck Rock wrote: > > I have a FreeBSD 5.2.1 system that this port is having a problem > > installing on. > > > > I have not had any dificulties with the previous releases on this > > machine. > > > > I tried downloading the port, running make. I got the following. > > > > ===> Vulnerability check disabled > > ===> Found saved configuration for clamav-0.80 > > ===> Extracting for clamav-0.88 > > => Checksum OK for clamav-0.88.tar.gz. > > ===> Patching for clamav-0.88 > > ===> Applying extra patch > > /root/modules/clamav/files/extra-patch-libclamav__unrarlib.h Isn't it a bit strange path? > > ===> Applying FreeBSD patches for clamav-0.88 > > ===> clamav-0.88 depends on shared library: gmp.6 - found Hm, it's the same error (see my answer at the "Re: Clamav 0.88 make problem" thread). Weird, it is also 5.x. > > ===> Configuring for clamav-0.88 > > ===> Building for clamav-0.88 > > make: cannot open Makefile. > > *** Error code 2 > > > > I found this error similar on an online forum, they didn't have any > > resolution. > > > > I checked ownership and directory space, no problems. > > > > So I decided to install the package instead. > > > > That installed without errors, but when I tried to run freshclam to > > update > > the virus database, I received this error. > > > > /libexec/ld-elf.so.1: Shared object "libz.so.3" not found > > > > I did a locate, and I only have this. > > > > /libexec/ld-elf.so.1 > > /usr/libexec/ld-elf.so.1 > > /usr/share/man/man1/ld-elf.so.1.1.gz > > /var/run/ld-elf.so.hints > > > > I have not had any problems before, so I don't know where to turn. > > I was > > unable to find any help searching online for these issues. I have > > about 6 > > FreeBSD servers to update with varying FreeBSD versions from 4.9 to > > 5.4. I > > have had no problems like this in the past several ClamAV upgrades. > > > You have installed packages built for a newer version of FreeBSD. > They won't work. Roll back the changes and try to investigate the > problem with the port. Ideally you should upgrade that machine - > it's out of support and coming up on two years old. +1 WBR -- Boris B. Samorodov, Research Engineer InPharmTech Co, http://www.ipt.ru Telephone & Internet Service Provider
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?72417468>