Date: Fri, 18 Mar 2011 13:36:08 +0100 From: Hans Petter Selasky <hselasky@c2i.net> To: freebsd-usb@freebsd.org Subject: Re: USB Mouse - only works after being replugged in Message-ID: <201103181336.08086.hselasky@c2i.net> In-Reply-To: <60BF8D78-783F-4A63-92DA-899BE2E62CF7@kominik.net> References: <5ecea789f7bdf4d0232f5c32de56188d@kominik.net> <201103180854.03062.hselasky@c2i.net> <60BF8D78-783F-4A63-92DA-899BE2E62CF7@kominik.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On Friday 18 March 2011 13:16:45 Barry Kominik wrote: > On Mar 18, 2011, at 3:54 AM, Hans Petter Selasky wrote: > >> Hi, > >> the usbconfig reset fixes the issue. Is there a way I can make this > >> happen on boot? > >> > >> #ps auxw|grep -i moused > >> root 2743 0.0 0.0 9124 1444 0 S+ 9:10PM 0:00.01 grep > >> -i moused > >> #usbconfig -d 4.2 reset > >> #ps auxw|grep -i moused > >> root 2843 0.6 0.0 8072 1076 ?? Ss 9:10PM 0:00.13 > >> /usr/sbin/moused -p /dev/ums0 -t auto -I /var/run/moused.ums0.pi > >> root 2895 0.0 0.0 9124 1444 0 S+ 9:10PM 0:00.01 grep > >> -i moused > > > > Do you have moused_enable="YES" in your /etc/rc.conf > > Yes.. > > > The moused should be started by devd. Could you dump the descriptors > > using commands "dump_curr_config_desc dump_device_desc" before the > > device is reset? > > > > Try to run: > > > > /usr/sbin/moused -p /dev/ums0 -t auto -I /var/run/moused.ums0.pid > > > > Before device reset. Maybe there is an error code. > > > > --HPS The USB descriptors look OK. Try to add: hw.usb.ums.debug="15" Into the end of /boot/loader.conf Also try: hw.usb.ugen.debug="15" Then reboot and send any errors you see in dmesg. Try: Edit /etc/rc.d/moused: Add "sleep 1" in the moused_start() function. Maybe your system is too quick to search for the character device? --HPS
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201103181336.08086.hselasky>