Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 17 Nov 2009 14:26:42 -0700
From:      Modulok <modulok@gmail.com>
To:        Adam Vande More <amvandemore@gmail.com>
Cc:        freebsd-questions@freebsd.org
Subject:   Re: Wester Digital 'deep recovery cycle' and gstripe?
Message-ID:  <64c038660911171326p329cee87x775a98c5d52605a3@mail.gmail.com>
In-Reply-To: <6201873e0911171303w2c37f1c3we928798a6760d393@mail.gmail.com>
References:  <64c038660911171249r141cc810n62a721e48225954c@mail.gmail.com> <6201873e0911171303w2c37f1c3we928798a6760d393@mail.gmail.com>

next in thread | previous in thread | raw e-mail | index | archive | help
Correction, it would be a graid3 setup. Sorry.

-Modulok-

On 11/17/09, Adam Vande More <amvandemore@gmail.com> wrote:
> On Tue, Nov 17, 2009 at 2:49 PM, Modulok <modulok@gmail.com> wrote:
>
>> List,
>>
>> Has anyone used 'Wester Digital Caviar Black' disks in a gstripe?
>>
>> I'm building a 2TB gstripe, from 3x 1TB disks. My concern, is the
>> disks are 'consumer grade' disks. Western Digital mention not to use
>> them with a raid controller as they have a potential, 'deep recovery
>> cycle', which an last up to 2 minutes. This would theoretically result
>> in them being dropped from the array. Despite this, I've heard
>> successful uses of these disks via gmirror. (Granted, not the same as
>> gstripe). Again, in theory, if one disk enters a 'deep recovery cycle'
>> and is dropped from the array, and during that time another disks does
>> the same the array is toast, right?
>>
>> Umm...what are the odds of this occurring? War stories? (The more I
>> type this out, the more it's starting to sound like a bad idea.)
>> Thoughts, ideas?
>> -Modulok-
>>
>> In a stripe, if one goes it all goes.  However I am not certain it's an
> issue in your case, the gstripe labeling mode with create a persistent
> config.  If there's not a better answer, best thing to do would be to test
> it out.  setting up gstripe takes like 10 minutes.
>
>
> --
> Adam Vande More
>



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?64c038660911171326p329cee87x775a98c5d52605a3>