Date: Mon, 13 Aug 2012 12:57:03 +0200 From: FBSD UG <freebsd@rgbaz.eu> To: FreeBSD Mailing List <freebsd-questions@freebsd.org> Subject: Re: af_atalk.c error FBSD 9.0Rp4 Message-ID: <CAC506B5-C2BB-4AC8-8398-A28B3CB5DBC0@rgbaz.eu> In-Reply-To: <6F12D89C-6D39-4504-B0D5-144ED8E6218B@rgbaz.eu> References: <6F12D89C-6D39-4504-B0D5-144ED8E6218B@rgbaz.eu>
next in thread | previous in thread | raw e-mail | index | archive | help
aaah nevermind... sigh... just for the archive, I'm learning C and had setenv GCC_EXEC_PREFIX "c-program" setenv C_INCLUDE_PATH=3D/usr/local/include which were preventing certain things to compile... and then 'Computer says "no"' gr arno On 10 aug 2012, at 15:40, FBSD UG wrote: > hello! >=20 > I'm trying to buildworld on my FreeBSD 9.0-RELEASE-p4 > server after successfully installing the kernel, but keep > running into the same error no matter what I do. >=20 > I've been googling for days now and must either be looking > in the wrong directions or it's not there. >=20 > The error I get is the following: >=20 > cc -O2 -pipe -DINET6 -DINET -Wall -Wmissing-prototypes -Wcast-qual = -Wwrite-strings -Wnested-externs -DRESCUE -std=3Dgnu99 -fstack-protector = -Wsystem-headers -Werror -Wall -Wno-format-y2k -Wno-uninitialized = -Wno-pointer-sign -c /usr/src/sbin/ifconfig/af_atalk.c > /usr/src/sbin/ifconfig/af_atalk.c: In function 'at_status': > /usr/src/sbin/ifconfig/af_atalk.c:94: error: 'struct sockaddr_at' has = no member named 'sat_range' > /usr/src/sbin/ifconfig/af_atalk.c: In function 'at_getaddr': > /usr/src/sbin/ifconfig/af_atalk.c:123: error: 'struct sockaddr_at' has = no member named 'sat_len' > /usr/src/sbin/ifconfig/af_atalk.c: In function 'at_postproc': > /usr/src/sbin/ifconfig/af_atalk.c:152: error: 'struct sockaddr_at' has = no member named 'sat_range' > *** Error code 1 >=20 > Stop in /usr/src/sbin/ifconfig. > *** Error code 1 >=20 > Stop in /usr/obj/usr/src/rescue/rescue. > *** Error code 1 >=20 > Stop in /usr/src/rescue/rescue. > *** Error code 1 >=20 > Stop in /usr/src/rescue. > *** Error code 1 >=20 > Stop in /usr/src. > *** Error code 1 >=20 > Stop in /usr/src. > *** Error code 1 >=20 > Stop in /usr/src. >=20 >=20 > I do also get this when I cd into /usr/src/sbin/ifconfig and type = make. >=20 >=20 > This is my kernelconfig I compiled the kernel with: >=20 > cpu I686_CPU > ident KERNEL9 >=20 > options SCHED_ULE = # ULE scheduler > options PREEMPTION = # Enable kernel thread preemption > options INET = # InterNETworking > options INET6 = # IPv6 communications protocols > options SCTP = # Stream Control Transmission Protocol > options FFS = # Berkeley Fast Filesystem > options SOFTUPDATES = # Enable FFS soft updates support > options UFS_ACL = # Support for access control lists > options UFS_DIRHASH = # Improve performance on big directories > options UFS_GJOURNAL # Enable = gjournal-based UFS journaling > options MD_ROOT = # MD is a potential root device > options NFSCL = # New Network Filesystem Client > options NFSD = # New Network Filesystem Server > options NFSLOCKD = # Network Lock Manager > options NFS_ROOT = # NFS usable as /, requires NFSCLIENT > options MSDOSFS = # MSDOS Filesystem > options CD9660 = # ISO 9660 Filesystem > options PROCFS = # Process filesystem (requires PSEUDOFS) > options PSEUDOFS = # Pseudo-filesystem framework > options GEOM_PART_GPT # GUID = Partition Tables. > options GEOM_LABEL = # Provides labelization > options COMPAT_FREEBSD4 # Compatible = with FreeBSD4 > options COMPAT_FREEBSD5 # Compatible = with FreeBSD5 > options COMPAT_FREEBSD6 # Compatible = with FreeBSD6 > options COMPAT_FREEBSD7 # Compatible = with FreeBSD7 > options SCSI_DELAY=3D1000 = # Delay (in ms) before probing SCSI > options KTRACE = # ktrace(1) support > options STACK = # stack(9) support > options SYSVSHM = # SYSV-style shared memory > options SYSVMSG = # SYSV-style message queues > options SYSVSEM = # SYSV-style semaphores > options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B = real-time extensions > options PRINTF_BUFR_SIZE=3D128 # Prevent printf = output being interspersed. > options KBD_INSTALL_CDEV # = install a CDEV entry in /dev > options HWPMC_HOOKS # = Necessary kernel hooks for hwpmc(4) > options AUDIT = # Security event auditing > options MAC = # TrustedBSD MAC Framework > options KDTRACE_HOOKS # Kernel = DTrace hooks > options INCLUDE_CONFIG_FILE # Include this = file in kernel >=20 > ### added > options QUOTA # quota on > options XFS # XFS filesystem > options GEOM_PART_APM # Apple HFS+ support > options NETATALK # appletalk > options KVA_PAGES=3D500 # max 500 for WineHQ > options MROUTING # multicast = routing kernel module >=20 >=20 > # To make an SMP kernel, the next two lines are needed > device apic # I/O APIC >=20 > # Bus support. > device acpi > device eisa > device pci >=20 > # Floppy drives > device fdc >=20 > # ATA controllers > device ahci # AHCI-compatible SATA = controllers > device ata # Legacy ATA/SATA = controllers > options ATA_CAM # Handle legacy controllers with CAM > options ATA_STATIC_ID # Static device numbering >=20 > # SCSI Controllers > device ahc = # AHA2940 and onboard AIC7xxx devices > options AHC_REG_PRETTY_PRINT # Print register bitfields in = debug > = # output. Adds ~128k to driver. > device aic = # Adaptec 15[012]x SCSI adapters, AIC-6[23]60. >=20 > # ATA/SCSI peripherals > device scbus # SCSI bus (required for ATA/SCSI) > device da # Direct Access (disks) > device sa # Sequential Access (tape etc) > device pass # Passthrough device (direct ATA/SCSI = access) > device ses # SCSI Environmental Services = (and SAF-TE) >=20 > # atkbdc0 controls both the keyboard and the PS/2 mouse > device atkbdc # AT keyboard controller > device atkbd # AT keyboard > device psm # PS/2 mouse >=20 > device vga # VGA video card driver >=20 > device splash # Splash screen and screen saver = support >=20 > # syscons is the default console driver, resembling an SCO console > device sc > options SC_PIXEL_MODE # add support for the raster text mode >=20 > # Power management support (see NOTES for more options) > device apm > device pmtimer >=20 > # Parallel port > device ppc > device ppbus # Parallel port bus (required) > device lpt # Printer > device ppi # Parallel port interface device >=20 > # PCI Ethernet NICs that use the common MII bus controller code. > # NOTE: Be sure to keep the 'device miibus' line in order to use these = NICs! > device miibus # MII bus support >=20 > # Pseudo devices. > device loop # Network loopback > device random # Entropy device > device ether # Ethernet support > device pty # BSD-style = compatibility pseudo ttys > device md # Memory "disks" > device gif # IPv6 and IPv4 = tunneling > device faith # IPv6-to-IPv4 relaying = (translation) > device firmware # firmware assist module >=20 > # The `bpf' device enables the Berkeley Packet Filter. > # Be aware of the administrative consequences of enabling this! > # Note that 'bpf' is required for DHCP. > device bpf # Berkeley packet filter >=20 > # USB support > device ohci # OHCI PCI->USB interface > device usb # USB Bus (required) > device uhid # "Human Interface Devices" > device ukbd # Keyboard > device ulpt # Printer > device umass # Disks/Mass storage - Requires scbus = and da > device ums # Mouse >=20 > # MISCELLANEOUS DEVICES AND OPTIONS: > device speaker # Play IBM BASIC-style noises = out your speaker > # iscsi: > device iscsi_initiator >=20 > ### OPTIONS FROM OLD KERNEL (FIREWALL): > options IPFIREWALL = # Include firewall > options IPFIREWALL_VERBOSE = # Include firewall logging > options IPFIREWALL_VERBOSE_LIMIT=3D100 # Log max=3D100 > options IPDIVERT = # Include divert in firewall > options IPSTEALTH = # Hide from traceroutes >=20 > Has anyone run into this before or has some tips for me how to solve = this? >=20 > thanks in advance >=20 > Arno B_______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to = "freebsd-questions-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAC506B5-C2BB-4AC8-8398-A28B3CB5DBC0>