Date: Tue, 15 Feb 2000 00:15:33 -0800 (PST) From: wellsian <wellsian@caffeine.com> To: courtney@whtz.com Cc: questions@FreeBSD.ORG Subject: Re: Serial Port Setup Message-ID: <Pine.BSF.4.21.0002142351470.11134-100000@boris.netgate.net> In-Reply-To: <85256886.001E3BEA.00@mail.whtz.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hello Bernie, That would depend on what you're trying to do once you set it; A serial port isn't really "set" until you open it for use, either with a terminal program or with something that listens for incoming connections. I'll make a reach and assume you want to make an async connection out to a modem or directly to another UART. Check the manpages for tip(1), cu(1) and remote(5). Once you define a connection "name" and its settings in /etc/remote you'll then be able to open a connection to it with either tip or cu. There are plenty of other comm programs but those two can handle the basics. (check /usr/ports/comms for some others) If you want to set up the port for incoming connections then you'll be interested in /etc/gettytab(5) and configuring getty(8) to listen for connections via /etc/ttys(5). If someone has better info please chime in. My incoming async experience is slightly dated. :/ (By the way, those parenthesized numbers only designate the manpage section numbers. I include them here to emphasize there are manpages available but they'll all show up without specifying the sections.) Dave On Tue, 15 Feb 2000 courtney@whtz.com wrote: > Hey everyone- > > What is the command that I would execute at the command line to set > up my serial port for 7 E 1 ?? > > thanks! > > bernie To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0002142351470.11134-100000>