Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 21 Mar 2005 19:44:44 +0900
From:      Yoichi Nakayama <yoichi@FreeBSD.org>
To:        freebsd-mobile@freebsd.org
Subject:   Re: WLI2-CB-G54L doesn't work
Message-ID:  <874qf5qnvn.wl%yoichi@FreeBSD.org>
In-Reply-To: <87oedddc35.wl%yoichi@FreeBSD.org>
References:  <87zmwyclyb.wl%yoichi@FreeBSD.org> <20050320.102234.105099355.imp@bsdimp.com>	<87y8cici5l.wl%yoichi@FreeBSD.org> <20050320.140430.82508419.imp@bsdimp.com>	<87oedddc35.wl%yoichi@FreeBSD.org>

next in thread | previous in thread | raw e-mail | index | archive | help
At Mon, 21 Mar 2005 10:25:34 +0900,
Yoichi Nakayama wrote:
> 
> At Sun, 20 Mar 2005 14:04:30 -0700 (MST),
> M. Warner Losh wrote:
> > 
> > In message: <87y8cici5l.wl%yoichi@FreeBSD.org>
> >             Yoichi Nakayama <yoichi@freebsd.org> writes:
> > : At Sun, 20 Mar 2005 10:22:34 -0700 (MST),
> > : M. Warner Losh wrote:
> > : > 
> > : > In message: <87zmwyclyb.wl%yoichi@FreeBSD.org>
> > : >             Yoichi Nakayama <yoichi@freebsd.org> writes:
> > : > : I bought cardbus wireless network card, Buffalo WLI2-CB-G54L
> > : > : which seems to have Atheros AR5211. I try it on Sony PCG-C1VSX/K
> > : > : and FreeBSD-current. Although I got following message and the
> > : > : card didn't work.
> > : > 
> > : > What other messages do you have?  Try setting hw.cardbus.debug=1 and
> > : > see if that's more informative.
> > : 
> > : I got following messages.
> > : 
> > : cardbus0: Expecting link target, got 0x7
> > : cardbus0: Resource not specified in CIS: id=10, size=20
> > : cardbus0: Resource not specified in CIS: id=14, size=20
> > : cardbus0: Resource not specified in CIS: id=18, size=800
> > : cardbus0: Non-prefetchable memory at 88000000-8800081f
> > : cardbus0: IO port at 1060-107f
> > : cardbus0: <network, ethernet> at device 0.0 (no driver attached)
> > 
> > Do you have ath driver in your tree or loaded?
> 
> I'm using GENERIC kernel and they are loaded.
> kldstat shows if_ath.ko, ath_rate.ko and ath_hal.ko.

I invoked pciconf -l -v and it describes the card as
none6@pci1:0:0: class=0x020000 card=0x03341154 chip=0x222017fe rev=0x00 hdr=0x00
    vendor   = 'InProComm Inc'
    class    = network
    subclass = ethernet

http://pciids.sourceforge.net/pci.ids saids
17fe  Linksys, A Division of Cisco Systems
   2220  [AirConn] INPROCOMM IPN 2220 Wireless LAN Adapter (rev 01)

I noticed I have misthought that it has ath chip, and I looked at
  http://buffalo.melcoinc.co.jp/download/driver/lan/wdrv.html (in Japanese)
again. Then I found that I've wrongly looked at WLI-CB-AG54L spec instead
of WLI2-CB-G54L which I have.
-- 
Yoichi NAKAYAMA



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?874qf5qnvn.wl%yoichi>