Date: Tue, 24 Mar 2020 16:22:32 -0400 From: "Dan Langille" <dan@langille.org> To: "Sergey Akhmatov" <sergey@akhmatov.ru>, "Pieper, Jeffrey E" <jeffrey.e.pieper@intel.com>, "freebsd-net@freebsd.org" <freebsd-net@freebsd.org> Subject: Re: SFP+ on PRO/10GbE Message-ID: <b0a2b019-7c45-4125-a2fc-bd6c8790fca1@www.fastmail.com> In-Reply-To: <88679204-4c23-7fce-681d-ab633b326fef@akhmatov.ru> References: <cb8f9df8-4a97-4823-bbcd-560a95e9df19@www.fastmail.com> <2A35EA60C3C77D438915767F458D6568B90935EC@ORSMSX111.amr.corp.intel.com> <e93467c5-d6bd-4db0-b4a4-a382adad7289@www.fastmail.com> <88679204-4c23-7fce-681d-ab633b326fef@akhmatov.ru>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, Mar 23, 2020, at 4:24 AM, Sergey Akhmatov wrote: > > On 2020-03-22 8:35 PM, Dan Langille wrote: > > Hello Jeff, > > > > Partial success. The card is now able to use an SFP+ optic. It warns me > > when the optic is installed: > > > > Mar 22 16:49:45 r720-01 kernel: WARNING: Intel (R) Network Connections are quality tested using Intel (R) Ethernet Optics. Using untested modules is not supported and may cause unstable operation or damage to the module or the adapter. Intel Corporation is not responsible for any harm caused by using untested modules. > > Do you see correct media type and signal levels running: > > $ ifconfig -vm ix0 > > ? [dan@r720-01:~] $ ifconfig -vm ix0 ix0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=a538b9<RXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,WOL_UCAST,WOL_MCAST,WOL_MAGIC,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6> capabilities=f53fbb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,WOL_UCAST,WOL_MCAST,WOL_MAGIC,VLAN_HWFILTER,VLAN_HWTSO,NETMAP,RXCSUM_IPV6,TXCSUM_IPV6> ether ... [snip] media: Ethernet autoselect (1000baseSX <full-duplex,rxpause,txpause>) status: active supported media: media autoselect media 10Gbase-SR nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL> plugged: SFP/SFP+/SFP28 10G Base-SR (LC) vendor: AVAGO PN: AFBR-703SDZ SN: AD0946A00YB DATE: 2009-11-10 module temperature: 38.09 C Voltage: 3.33 Volts RX: 0.31 mW (-4.95 dBm) TX: 0.56 mW (-2.48 dBm) [dan@r720-01:~] $ That looks right to me, but I have never inspected this before. -- Dan Langille dan@langille.org
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?b0a2b019-7c45-4125-a2fc-bd6c8790fca1>