Date: Wed, 21 Jul 2004 13:47:07 -0700 From: Dan Finn <dhrider@gmail.com> To: freebsd-mobile@freebsd.org Subject: REPOST : having trouble with Merlin C-201 CDMA card Message-ID: <89ceee70407211347449439c8@mail.gmail.com> In-Reply-To: <89ceee70406231204a9b5662@mail.gmail.com> References: <89ceee70406231204a9b5662@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
FreeBSD stewie.thna.net 5.2.1-RELEASE FreeBSD 5.2.1-RELEASE #0: Mon Feb 23 20:45:55 GMT 2004 root@wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC i386 this is on a dell inspiron 2650. The system sees the card, here's the dmesg output: pccard0: CIS checksum failed pccard0: Allocation failed for cfe 13 sio4: <Novatel Wireless CDMA 1.9GHz> at port 0x2f8-0x2ff,0x3e8-0x3ef irq 10 function 0 config 21 on pccard0 sio4: type 16550A sio4: unable to activate interrupt in fast mode - using normal mode I tried to get this working using the instructions from: http://people.freebsd.org/~nsayer/ here's my ppp.log file: Jun 3 14:36:12 stewie ppp[620]: Phase: Using interface: tun0 Jun 3 14:36:12 stewie ppp[620]: Phase: deflink: Created in closed state Jun 3 14:36:12 stewie ppp[620]: tun0: Command: default: ident user-ppp VERSION (built COMPILATIONDATE) Jun 3 14:36:12 stewie ppp[620]: tun0: Command: default: set device /dev/cuaa1 Jun 3 14:36:12 stewie ppp[620]: tun0: Command: default: set speed 115200 Jun 3 14:36:12 stewie ppp[620]: tun0: Command: default: set dial ABORT BUSY ABO RT NO\sCARRIER TIMEOUT 5 "" AT OK-AT-OK ATE1Q0 OK \dATDT\T TIMEOUT 40 CONNECT Jun 3 14:36:12 stewie ppp[620]: tun0: Command: default: set timeout 180 Jun 3 14:36:12 stewie ppp[620]: tun0: Command: default: enable dns Jun 3 14:36:12 stewie ppp[620]: tun0: Command: inet: set openmode active Jun 3 14:36:12 stewie ppp[620]: tun0: Command: inet: set mru 576 Jun 3 14:36:12 stewie ppp[620]: tun0: Command: inet: set device /dev/cuaa4 Jun 3 14:36:12 stewie ppp[620]: tun0: Command: inet: set speed 19200 Jun 3 14:36:12 stewie ppp[620]: tun0: Command: inet: set dial ABORT ERROR "" AT \\APPP\r\c CONNECT Jun 3 14:36:12 stewie ppp[620]: tun0: Command: inet: dial Jun 3 14:36:12 stewie ppp[620]: tun0: Phase: bundle: Establish Jun 3 14:36:12 stewie ppp[620]: tun0: Phase: deflink: closed -> opening Jun 3 14:36:12 stewie ppp[620]: tun0: Phase: PPP Started (interactive mode). Jun 3 14:36:12 stewie ppp[620]: tun0: Phase: deflink: Connected! Jun 3 14:36:12 stewie ppp[620]: tun0: Phase: deflink: opening -> dial Jun 3 14:36:12 stewie ppp[620]: tun0: Chat: deflink: Dial attempt 1 of 1 Jun 3 14:36:12 stewie ppp[620]: tun0: Chat: Send: AT\APPP^M Jun 3 14:36:12 stewie ppp[620]: tun0: Chat: Expect(30): CONNECT Jun 3 14:36:19 stewie ppp[620]: tun0: Command: /dev/ttyv0: dial Jun 3 14:36:25 stewie ppp[620]: tun0: Phase: /dev/ttyv0: Client connection clos ed. Jun 3 14:36:25 stewie ppp[620]: tun0: Phase: deflink: Disconnected! Jun 3 14:36:25 stewie ppp[620]: tun0: Phase: deflink: dial -> logout Jun 3 14:36:25 stewie ppp[620]: tun0: Phase: deflink: logout -> hangup Jun 3 14:36:25 stewie ppp[620]: tun0: Phase: deflink: Disconnected! Jun 3 14:36:25 stewie ppp[620]: tun0: Phase: deflink: Connect time: 13 secs: 0 octets in, 0 octets out Jun 3 14:36:25 stewie ppp[620]: tun0: Phase: deflink: 0 packets in, 0 packets o ut Jun 3 14:36:25 stewie ppp[620]: tun0: Phase: total 0 bytes/sec, peak 0 bytes/s ec on Thu Jun 3 14:36:12 2004 Jun 3 14:36:25 stewie ppp[620]: tun0: Phase: deflink: hangup -> closed Jun 3 14:36:25 stewie ppp[620]: tun0: Phase: bundle: Dead Jun 3 14:36:25 stewie ppp[620]: tun0: Phase: PPP Terminated (normal). Jun 3 14:39:47 stewie ppp[661]: Phase: Using interface: tun0 Jun 3 14:39:47 stewie ppp[661]: Phase: deflink: Created in closed state Jun 3 14:39:47 stewie ppp[661]: tun0: Command: default: ident user-ppp VERSION (built COMPILATIONDATE) Jun 3 14:39:47 stewie ppp[661]: tun0: Command: default: set device /dev/cuaa1 Jun 3 14:39:47 stewie ppp[661]: tun0: Command: default: set speed 115200 Jun 3 14:39:47 stewie ppp[661]: tun0: Command: default: set dial ABORT BUSY ABO RT NO\sCARRIER TIMEOUT 5 "" AT OK-AT-OK ATE1Q0 OK \dATDT\T TIMEOUT 40 CONNECT Jun 3 14:39:47 stewie ppp[661]: tun0: Command: default: set timeout 180 Jun 3 14:39:47 stewie ppp[661]: tun0: Command: default: enable dns Jun 3 14:39:47 stewie ppp[661]: tun0: Command: inet: set openmode active Jun 3 14:39:47 stewie ppp[661]: tun0: Command: inet: set mru 576 Jun 3 14:39:47 stewie ppp[661]: tun0: Command: inet: set device /dev/cuaa4 Jun 3 14:39:47 stewie ppp[661]: tun0: Command: inet: set speed 19200 Jun 3 14:39:47 stewie ppp[661]: tun0: Command: inet: set dial ABORT ERROR "" AT \\APPP\r\c CONNECT Jun 3 14:39:47 stewie ppp[661]: tun0: Command: inet: dial Jun 3 14:39:47 stewie ppp[661]: tun0: Phase: bundle: Establish Jun 3 14:39:47 stewie ppp[661]: tun0: Phase: deflink: closed -> opening Jun 3 14:39:47 stewie ppp[661]: tun0: Phase: PPP Started (interactive mode). Jun 3 14:39:47 stewie ppp[661]: tun0: Phase: deflink: Connected! Jun 3 14:39:47 stewie ppp[661]: tun0: Phase: deflink: opening -> dial Jun 3 14:39:47 stewie ppp[661]: tun0: Chat: deflink: Dial attempt 1 of 1 Jun 3 14:39:47 stewie ppp[661]: tun0: Chat: Send: AT\APPP^M Jun 3 14:39:47 stewie ppp[661]: tun0: Chat: Expect(30): CONNECT Then when running "ppp inet" it completely locks my system up, if the card is plugged in and I remove it it completely locks my system up, if I symlink /dev/cuaa0 -> /dev/modem and then try to access it using minicom it completely locks my system up. Does anyone have any ideas. It works fine under windows but I have having to reboot to windows for any reason at all. Thanks, Dan Finn
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?89ceee70407211347449439c8>