Date: Fri, 20 Nov 1998 05:15:38 -0800 (PST) From: vk@spies.com (Venkatesh Krishnamurthi) To: nconway.list@ukaea.org.uk (Neil Conway) Cc: AIC7xxx@FreeBSD.ORG Subject: Re: Ultra2-wide drives id'ed as Fast-wide with 5.1.4 Message-ID: <m0zgqPS-000TkCC@spies.com> In-Reply-To: <98Nov20.130451gmt.66330@gateway.ukaea.org.uk> from "Neil Conway" at Nov 20, 98 01:09:38 pm
next in thread | previous in thread | raw e-mail | index | archive | help
This seems to be similar to the problem I reported with 40MB/s drives being reported as 20MB/s. I upgraded from 5.1.2 to 5.1.4. Venkatesh > > I just upgraded from 2.1.108 with 5.1.0pre10 to 5.1.4. > > Suddenly I have gone from 80MB/s to 20MB/s. PC is Dell 410 with > 2xPI400, 512MB. > > Maybe the following log will help? > > Neil > > ------------------------------------- > > The two dumps from the log follow: > > With 2.1.108 and 5.1.0pre10: > Nov 19 18:01:01 fuslwa kernel: aic7xxx: Warning - detected > auto-termination on controller: > Nov 19 18:01:01 fuslwa kernel: aic7xxx: <Adaptec AIC-7880 Ultra SCSI > host adapter> at PCI 14/0 > Nov 19 18:01:01 fuslwa kernel: aic7xxx: Please verify driver detected > settings are correct. > Nov 19 18:01:01 fuslwa kernel: aic7xxx: If not, then please properly set > the device termination > Nov 19 18:01:01 fuslwa kernel: aic7xxx: in the Adaptec SCSI BIOS by > hitting CTRL-A when prompted > Nov 19 18:01:01 fuslwa kernel: aic7xxx: during machine bootup. > Nov 19 18:01:01 fuslwa kernel: aic7xxx: Cables present (Int-50 NO, > Int-68 NO, Ext-68 NO) > Nov 19 18:01:01 fuslwa kernel: (scsi0) <Adaptec AIC-7890/1 Ultra2 SCSI > host adapter> found at PCI 10/0 > Nov 19 18:01:01 fuslwa kernel: (scsi0) Wide Channel, SCSI ID=7, 32/255 > SCBs > Nov 19 18:01:01 fuslwa kernel: (scsi0) Downloading sequencer code... 407 > instructions downloaded > Nov 19 18:01:01 fuslwa kernel: (scsi1) <Adaptec AIC-7880 Ultra SCSI host > adapter> found at PCI 14/0 > Nov 19 18:01:01 fuslwa kernel: (scsi1) Wide Channel, SCSI ID=7, 16/255 > SCBs > Nov 19 18:01:01 fuslwa kernel: (scsi1) Downloading sequencer code... 419 > instructions downloaded > Nov 19 18:01:01 fuslwa kernel: scsi0 : Adaptec AHA274x/284x/294x > (EISA/VLB/PCI-Fast SCSI) 5.1.0pre10/3.2.4 > Nov 19 18:01:01 fuslwa kernel: <Adaptec AIC-7890/1 Ultra2 SCSI > host adapter> > Nov 19 18:01:01 fuslwa kernel: scsi1 : Adaptec AHA274x/284x/294x > (EISA/VLB/PCI-Fast SCSI) 5.1.0pre10/3.2.4 > Nov 19 18:01:01 fuslwa kernel: <Adaptec AIC-7880 Ultra SCSI host > adapter> > Nov 19 18:01:01 fuslwa kernel: scsi : 2 hosts. > Nov 19 18:01:01 fuslwa kernel: Vendor: QUANTUM Model: VIKING II > 4.5WLS Rev: 3506 > Nov 19 18:01:01 fuslwa kernel: Type: > Direct-Access ANSI SCSI revision: 02 > Nov 19 18:01:01 fuslwa kernel: Detected scsi disk sda at scsi0, channel > 0, id 0, lun 0 > Nov 19 18:01:01 fuslwa kernel: Vendor: QUANTUM Model: VIKING II > 4.5WLS Rev: 3506 > Nov 19 18:01:01 fuslwa kernel: Type: > Direct-Access ANSI SCSI revision: 02 > Nov 19 18:01:01 fuslwa kernel: Detected scsi disk sdb at scsi0, channel > 0, id 1, lun 0 > Nov 19 18:01:01 fuslwa kernel: Vendor: QUANTUM Model: VIKING 4.5 > NSE Rev: 8808 > Nov 19 18:01:01 fuslwa kernel: Type: > Direct-Access ANSI SCSI revision: 02 > Nov 19 18:01:01 fuslwa kernel: Detected scsi disk sdc at scsi1, channel > 0, id 3, lun 0 > Nov 19 18:01:01 fuslwa kernel: Vendor: NEC Model: CD-ROM > DRIVE:464 Rev: 1.05 > Nov 19 18:01:01 fuslwa kernel: Type: > CD-ROM ANSI SCSI revision: 02 > Nov 19 18:01:01 fuslwa kernel: Vendor: SONY Model: > SDT-9000 Rev: 125F > Nov 19 18:01:01 fuslwa kernel: Type: > Sequential-Access ANSI SCSI revision: 02 > Nov 19 18:01:01 fuslwa kernel: scsi : detected 3 SCSI disks total. > Nov 19 18:01:01 fuslwa kernel: (scsi0:0:0:0) Synchronous at 80.0 > Mbyte/sec, offset 31. > Nov 19 18:01:01 fuslwa kernel: SCSI device sda: hdwr sector= 512 bytes. > Sectors= 8910423 [4350 MB] [4.4 GB] > Nov 19 18:01:01 fuslwa kernel: (scsi0:0:1:0) Synchronous at 80.0 > Mbyte/sec, offset 31. > Nov 19 18:01:01 fuslwa kernel: SCSI device sdb: hdwr sector= 512 bytes. > Sectors= 8910423 [4350 MB] [4.4 GB] > Nov 19 18:01:01 fuslwa kernel: (scsi1:0:3:0) Synchronous at 20.0 > Mbyte/sec, offset 15. > Nov 19 18:01:01 fuslwa kernel: SCSI device sdc: hdwr sector= 512 bytes. > Sectors= 8899737 [4345 MB] [4.3 GB] > > > and with 2.1.129/5.1.4: > Nov 19 18:05:23 fuslwa kernel: (scsi0) <Adaptec AIC-7890/1 Ultra2 SCSI > host adapter> found at PCI 10/0 > Nov 19 18:05:23 fuslwa kernel: (scsi0) Wide Channel, SCSI ID=7, 32/255 > SCBs > Nov 19 18:05:23 fuslwa kernel: (scsi0) Downloading sequencer code... 407 > instructions downloaded > Nov 19 18:05:23 fuslwa kernel: (scsi1) <Adaptec AIC-7880 Ultra SCSI host > adapter> found at PCI 14/0 > Nov 19 18:05:23 fuslwa kernel: (scsi1) Wide Channel, SCSI ID=7, 16/255 > SCBs > Nov 19 18:05:23 fuslwa kernel: (scsi1) Warning - detected > auto-termination > Nov 19 18:05:23 fuslwa kernel: (scsi1) Please verify driver detected > settings are correct. > Nov 19 18:05:23 fuslwa kernel: (scsi1) If not, then please properly set > the device termination > Nov 19 18:05:23 fuslwa kernel: (scsi1) in the Adaptec SCSI BIOS by > hitting CTRL-A when prompted > Nov 19 18:05:23 fuslwa kernel: (scsi1) during machine bootup. > Nov 19 18:05:23 fuslwa kernel: (scsi1) Cables present (Int-50 NO, Int-68 > NO, Ext-68 NO) > Nov 19 18:05:23 fuslwa kernel: (scsi1) Downloading sequencer code... 419 > instructions downloaded > Nov 19 18:05:23 fuslwa kernel: scsi0 : Adaptec AHA274x/284x/294x > (EISA/VLB/PCI-Fast SCSI) 5.1.4/3.2.4 > Nov 19 18:05:23 fuslwa kernel: <Adaptec AIC-7890/1 Ultra2 SCSI > host adapter> > Nov 19 18:05:23 fuslwa kernel: scsi1 : Adaptec AHA274x/284x/294x > (EISA/VLB/PCI-Fast SCSI) 5.1.4/3.2.4 > Nov 19 18:05:23 fuslwa kernel: <Adaptec AIC-7880 Ultra SCSI host > adapter> > Nov 19 18:05:23 fuslwa kernel: scsi : 2 hosts. > Nov 19 18:05:23 fuslwa kernel: Vendor: QUANTUM Model: VIKING II > 4.5WLS Rev: 3506 > Nov 19 18:05:23 fuslwa kernel: Type: > Direct-Access ANSI SCSI revision: 02 > Nov 19 18:05:23 fuslwa kernel: Detected scsi disk sda at scsi0, channel > 0, id 0, lun 0 > Nov 19 18:05:23 fuslwa kernel: Vendor: QUANTUM Model: VIKING II > 4.5WLS Rev: 3506 > Nov 19 18:05:23 fuslwa kernel: Type: > Direct-Access ANSI SCSI revision: 02 > Nov 19 18:05:23 fuslwa kernel: Detected scsi disk sdb at scsi0, channel > 0, id 1, lun 0 > Nov 19 18:05:23 fuslwa kernel: Vendor: QUANTUM Model: VIKING 4.5 > NSE Rev: 8808 > Nov 19 18:05:23 fuslwa kernel: Type: > Direct-Access ANSI SCSI revision: 02 > Nov 19 18:05:23 fuslwa kernel: Detected scsi disk sdc at scsi1, channel > 0, id 3, lun 0 > Nov 19 18:05:23 fuslwa kernel: Vendor: NEC Model: CD-ROM > DRIVE:464 Rev: 1.05 > Nov 19 18:05:23 fuslwa kernel: Type: > CD-ROM ANSI SCSI revision: 02 > Nov 19 18:05:23 fuslwa kernel: Vendor: SONY Model: > SDT-9000 Rev: 125F > Nov 19 18:05:23 fuslwa kernel: Type: > Sequential-Access ANSI SCSI revision: 02 > Nov 19 18:05:23 fuslwa kernel: Detected scsi tape st0 at scsi1, channel > 0, id 6, lun 0 > Nov 19 18:05:23 fuslwa kernel: scsi : detected 1 SCSI tape 3 SCSI disks > total. > Nov 19 18:05:23 fuslwa kernel: (scsi0:0:0:0) Synchronous at 20.0 > Mbyte/sec, offset 31. > Nov 19 18:05:23 fuslwa kernel: SCSI device sda: hdwr sector= 512 bytes. > Sectors= 8910423 [4350 MB] [4.4 GB] > Nov 19 18:05:23 fuslwa kernel: (scsi0:0:1:0) Synchronous at 20.0 > Mbyte/sec, offset 31. > Nov 19 18:05:23 fuslwa kernel: SCSI device sdb: hdwr sector= 512 bytes. > Sectors= 8910423 [4350 MB] [4.4 GB] > Nov 19 18:05:23 fuslwa kernel: (scsi1:0:3:0) Synchronous at 20.0 > Mbyte/sec, offset 15. > Nov 19 18:05:23 fuslwa kernel: SCSI device sdc: hdwr sector= 512 bytes. > Sectors= 8899737 [4345 MB] [4.3 GB] > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-aic7xxx" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-aic7xxx" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?m0zgqPS-000TkCC>