Date: Mon, 21 Sep 2020 19:54:40 +0900 From: KIRIYAMA Kazuhiko <kiri@truefc.org> To: Niclas Zeising <zeising+freebsd@daemonic.se> Cc: KIRIYAMA Kazuhiko <kiri@truefc.org>, x11@FreeBSD.org Subject: Re: GTX 1050Ti can't plugin-play usb devices Message-ID: <202009211054.08LAseE4070179@kx.truefc.org> In-Reply-To: <9eb6fce2-61d3-9938-6d3c-73440399b8d4@daemonic.se> References: <202009210642.08L6gdmb037247@kx.truefc.org> <9eb6fce2-61d3-9938-6d3c-73440399b8d4@daemonic.se>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, 21 Sep 2020 16:54:09 +0900,
Niclas Zeising wrote:
>
> On 2020-09-21 08:42, KIRIYAMA Kazuhiko wrote:
> > Hi, folks
> >
> > I've implemented NVIDIA GTX 1050Ti in Supermicro X11SPM-F
> > machine and built up X environment on 13.0-CURRENT
> > (r363381). All went right and `startx' successfully done.
> > But usb tools could not plugin-played. After pull out usb
> > and pull in, keyboard, mouse and usbaudio all were not
> > responded. I killed X at remote machine, then all worked
> > again. Is there any keybord or mouse device fixed by xorg ?
> >
>
> You need to remove the configuration for keyboard and mouse, and have it
> use libinput instead, to get auto configuration of input devices in X on
> FreeBSD 12.1 and later.
>
> > /etc/X11/xorg.conf:
> > # nvidia-xconfig: X configuration file generated by nvidia-xconfig
> > # nvidia-xconfig: version 440.100
> >
> >
> > Section "ServerLayout"
> > Identifier "X.org Configured"
> > Screen 0 "Screen0" 0 0
> > Screen 1 "Screen1" RightOf "Screen0"
> > InputDevice "Mouse0" "CorePointer"
> > InputDevice "Keyboard0" "CoreKeyboard"
>
> Remove the two lines above.
I've done above:
admin@smtp:~[51]% diff -u /etc/X11/xorg.conf.bak /etc/X11/xorg.conf
--- /etc/X11/xorg.conf.bak 2020-09-21 17:04:29.389641000 +0900
+++ /etc/X11/xorg.conf 2020-09-21 19:43:45.328892000 +0900
@@ -6,8 +6,6 @@
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
- InputDevice "Mouse0" "CorePointer"
- InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
@@ -24,19 +22,6 @@
Section "Module"
Load "glxserver_nvidia"
Load "glx"
-EndSection
-
-Section "InputDevice"
- Identifier "Keyboard0"
- Driver "kbd"
-EndSection
-
-Section "InputDevice"
- Identifier "Mouse0"
- Driver "mouse"
- Option "Protocol" "auto"
- Option "Device" "/dev/sysmouse"
- Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
admin@smtp:~[52]%
And reboot desktop, but nothing changed. In this case, dmesg
as follows:
---<<BOOT>>---
Copyright (c) 1992-2020 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-CURRENT #0 r363381M: Thu Jul 30 16:46:49 JST 2020
root@msrvkxb:/usr/obj/usr/src/amd64.amd64/sys/XIJ amd64
FreeBSD clang version 10.0.1 (git@github.com:llvm/llvm-project.git llvmorg-10.0.1-rc2-0-g77d76b71d7d)
WARNING: WITNESS option enabled, expect reduced performance.
VT(efifb): resolution 1024x768
CPU: Intel(R) Xeon(R) Silver 4210 CPU @ 2.20GHz (2200.08-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x50657 Family=0x6 Model=0x55 Stepping=7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x121<LAHF,ABM,Prefetch>
Structured Extended Features=0xd39ffffb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,NFPUSG,MPX,PQE,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,PROCTRACE,AVX512CD,AVX512BW,AVX512VL>
Structured Extended Features2=0x808<PKU,AVX512VNNI>
Structured Extended Features3=0xbc000400<MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD>
XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
IA32_ARCH_CAPS=0xab<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO,TSX_CTRL>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
TSC: P-state invariant, performance statistics
real memory = 137434759168 (131068 MB)
avail memory = 133366202368 (127187 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <SUPERM SMCI--MB>
FreeBSD/SMP: Multiprocessor System Detected: 20 CPUs
FreeBSD/SMP: 1 package(s) x 10 core(s) x 2 hardware threads
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-23
ioapic1 <Version 2.0> irqs 24-31
ioapic2 <Version 2.0> irqs 32-39
ioapic3 <Version 2.0> irqs 40-47
ioapic4 <Version 2.0> irqs 48-55
Launching APs: 1 16 15 5 17 9 4 13 7 19 8 6 14 3 18 11 10 12 2
Timecounter "TSC-low" frequency 1100037804 Hz quality 1000
random: entropy device external interface
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 13.0.
kbd1 at kbdmux0
000.000060 [4342] netmap_init netmap: loaded module
[ath_hal] loaded
nexus0
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
cryptosoft0: <software crypto>
acpi0: <SUPERM SUPERM>
acpi0: Power Button (fixed)
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 24000000 Hz quality 950
Event timer "HPET" frequency 24000000 Hz quality 350
Event timer "HPET1" frequency 24000000 Hz quality 340
Event timer "HPET2" frequency 24000000 Hz quality 340
Event timer "HPET3" frequency 24000000 Hz quality 340
Event timer "HPET4" frequency 24000000 Hz quality 340
Event timer "HPET5" frequency 24000000 Hz quality 340
Event timer "HPET6" frequency 24000000 Hz quality 340
Event timer "HPET7" frequency 24000000 Hz quality 340
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0
acpi_syscontainer0: <System Container> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0
pci0: <ACPI PCI bus> numa-domain 0 on pcib0
pci0: <dasp, performance counters> at device 8.1 (no driver attached)
pci0: <unknown> at device 17.0 (no driver attached)
pci0: <unknown> at device 17.1 (no driver attached)
ahci0: <Intel Lewisburg AHCI SATA controller> port 0x800-0x807,0x810-0x813,0x820-0x83f mem 0xa4216000-0xa4217fff,0xa4219000-0xa42190ff,0xa4180000-0xa41fffff irq 16 at device 17.5 numa-domain 0 on pci0
ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
xhci0: <Intel Lewisburg USB 3.0 controller> mem 0xa4200000-0xa420ffff irq 16 at device 20.0 numa-domain 0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 numa-domain 0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> at device 22.0 (no driver attached)
pci0: <simple comms> at device 22.1 (no driver attached)
pci0: <simple comms> at device 22.4 (no driver attached)
ahci1: <Intel Lewisburg AHCI SATA controller> port 0x840-0x847,0x850-0x853,0x860-0x87f mem 0xa4214000-0xa4215fff,0xa4218000-0xa42180ff,0xa4100000-0xa417ffff irq 16 at device 23.0 numa-domain 0 on pci0
ahci1: AHCI v1.31 with 8 6Gbps ports, Port Multiplier not supported
ahcich6: <AHCI channel> at channel 0 on ahci1
ahcich7: <AHCI channel> at channel 1 on ahci1
ahcich8: <AHCI channel> at channel 2 on ahci1
ahcich9: <AHCI channel> at channel 3 on ahci1
ahcich10: <AHCI channel> at channel 4 on ahci1
ahcich11: <AHCI channel> at channel 5 on ahci1
ahcich12: <AHCI channel> at channel 6 on ahci1
ahcich13: <AHCI channel> at channel 7 on ahci1
ahciem1: <AHCI enclosure management bridge> on ahci1
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 numa-domain 0 on pci0
pci1: <ACPI PCI bus> numa-domain 0 on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.5 numa-domain 0 on pci0
pci2: <ACPI PCI bus> numa-domain 0 on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 0.0 numa-domain 0 on pci2
pci3: <ACPI PCI bus> numa-domain 0 on pcib3
vgapci0: <VGA-compatible display> port 0x3000-0x307f mem 0xa3000000-0xa3ffffff,0xa4000000-0xa401ffff irq 17 at device 0.0 numa-domain 0 on pci3
vgapci0: Boot video device
isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci0
isa0: <ISA bus> numa-domain 0 on isab0
pci0: <memory> at device 31.2 (no driver attached)
pci0: <serial bus> at device 31.5 (no driver attached)
pcib4: <ACPI Host-PCI bridge> numa-domain 0 on acpi0
pci4: <ACPI PCI bus> numa-domain 0 on pcib4
pcib5: <ACPI Host-PCI bridge> numa-domain 0 on acpi0
pci5: <ACPI PCI bus> numa-domain 0 on pcib5
pcib6: <ACPI PCI-PCI bridge> irq 47 at device 0.0 numa-domain 0 on pci5
pci6: <ACPI PCI bus> numa-domain 0 on pcib6
vgapci1: <VGA-compatible display> port 0xb000-0xb07f mem 0xdf000000-0xdfffffff,0xc0000000-0xcfffffff,0xd0000000-0xd1ffffff irq 40 at device 0.0 numa-domain 0 on pci6
hdac0: <NVIDIA (0x0fb9) HDA Controller> mem 0xe0080000-0xe0083fff irq 44 at device 0.1 numa-domain 0 on pci6
pcib7: <ACPI Host-PCI bridge> numa-domain 0 on acpi0
pci7: <ACPI PCI bus> numa-domain 0 on pcib7
pcib8: <ACPI PCI-PCI bridge> irq 55 at device 0.0 numa-domain 0 on pci7
pci8: <ACPI PCI bus> numa-domain 0 on pcib8
pcib9: <ACPI PCI-PCI bridge> mem 0xfbe00000-0xfbe1ffff irq 48 at device 0.0 numa-domain 0 on pci8
pci9: <ACPI PCI bus> numa-domain 0 on pcib9
pcib10: <ACPI PCI-PCI bridge> irq 48 at device 3.0 numa-domain 0 on pci9
pci10: <ACPI PCI bus> numa-domain 0 on pcib10
pci10: <network, ethernet> at device 0.0 (no driver attached)
ixl0: <Intel(R) Ethernet Connection X722 for 1GbE - 2.2.0-k> mem 0xf9000000-0xf9ffffff,0xfb008000-0xfb00ffff irq 54 at device 0.2 numa-domain 0 on pci10
ixl0: fw 3.1.55727 api 1.5 nvm 3.31 etid 80000d05 oem 1.262.0
ixl0: PF-ID[2]: VFs 32, MSI-X 129, VF MSI-X 5, QPs 427, MDIO shared
ixl0: Using 1024 TX descriptors and 1024 RX descriptors
ixl0: queue equality override not set, capping rx_queues at 10 and tx_queues at 10
ixl0: Using 10 RX queues 10 TX queues
ixl0: Using MSI-X interrupts with 11 vectors
ixl0: Ethernet address: 3c:ec:ef:02:bb:ce
ixl0: Allocating 16 queues for PF LAN VSI; 10 queues active
ixl0: SR-IOV ready
ixl0: netmap queues/slots: TX 10/1024, RX 10/1024
ixl1: <Intel(R) Ethernet Connection X722 for 1GbE - 2.2.0-k> mem 0xf8000000-0xf8ffffff,0xfb000000-0xfb007fff irq 54 at device 0.3 numa-domain 0 on pci10
ixl1: fw 3.1.55727 api 1.5 nvm 3.31 etid 80000d05 oem 1.262.0
ixl1: PF-ID[3]: VFs 32, MSI-X 129, VF MSI-X 5, QPs 426, MDIO shared
ixl1: Using 1024 TX descriptors and 1024 RX descriptors
ixl1: queue equality override not set, capping rx_queues at 10 and tx_queues at 10
ixl1: Using 10 RX queues 10 TX queues
ixl1: Using MSI-X interrupts with 11 vectors
ixl1: Ethernet address: 3c:ec:ef:02:bb:cf
ixl1: Allocating 16 queues for PF LAN VSI; 10 queues active
ixl1: Link is up, 1 Gbps Full Duplex, Requested FEC: None, Negotiated FEC: None, Autoneg: True, Flow Control: None
ixl1: link state changed to UP
ixl1: SR-IOV ready
ixl1: netmap queues/slots: TX 10/1024, RX 10/1024
debugnet_any_ifnet_update: Bad dn_init result from ixl1 (ifp 0xfffff801085fc000), ignoring.
ixl1: link state changed to DOWN
pci7: <dasp, performance counters> at device 14.0 (no driver attached)
pci7: <dasp, performance counters> at device 15.0 (no driver attached)
pci7: <dasp, performance counters> at device 18.0 (no driver attached)
pci7: <dasp, performance counters> at device 18.1 (no driver attached)
pci7: <dasp, performance counters> at device 21.1 (no driver attached)
pci7: <dasp, performance counters> at device 22.1 (no driver attached)
pci7: <dasp, performance counters> at device 22.5 (no driver attached)
cpu0: <ACPI CPU> numa-domain 0 on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console (115200,n,8,1)
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
est0: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
Obsolete code will be removed soon: random(9) is the obsolete Park-Miller LCG from 1988
hdacc0: <NVIDIA (0x0080) HDA CODEC> at cad 0 on hdac0
hdaa0: <NVIDIA (0x0080) Audio Function Group> at nid 1 on hdacc0
pcm0: <NVIDIA (0x0080) (HDMI/DP 8ch)> at nid 4 on hdaa0
pcm1: <NVIDIA (0x0080) (HDMI/DP 8ch)> at nid 5 on hdaa0
pcm2: <NVIDIA (0x0080) (HDMI/DP 8ch)> at nid 6 on hdaa0
ses0 at ahciem0 bus 0 scbus6 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
Trying to mount root from zfs:zroot/ROOT/default []...
WARNING: WITNESS option enabled, expect reduced performance.
ses1 at ahciem1 bus 0 scbus15 target 0 lun 0
ses1: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
ses1: SEMB SES Device
ses0: pass0 in 'Slot 00', SATA Slot: scbus0 target 0
ugen0.1: <0x8086 XHCI root HUB> at usbus0
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <HGST HUS722T2TALA604 RAGNWA09> ACS-3 ATA SATA 3.x device
ada0: Serial Number WCC6N7FHLLRA
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 1907729MB (3907029168 512 byte sectors)
ses0: pass1 in 'Slot 01', SATA Slot: scbus1 target 0
uhub0ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <HGST HUS722T2TALA604 RAGNWA09> ACS-3 ATA SATA 3.x device
ada1: Serial Number WCC6N7JJXZXR
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 1907729MB (3907029168 512 byte sectors)
numa-domain 0 on usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
GEOM_MIRROR: Device mirror/swap launched (2/2).
Root mount waiting for: usbus0
uhub0: 26 ports with 26 removable, self powered
Root mount waiting for: usbus0
ixl0: Link is up, 1 Gbps Full Duplex, Requested FEC: None, Negotiated FEC: None, Autoneg: True, Flow Control: None
ixl0: link state changed to UP
debugnet_any_ifnet_update: Bad dn_init result from ixl0 (ifp 0xfffff801085fc800), ignoring.
ixl1: Link is up, 1 Gbps Full Duplex, Requested FEC: None, Negotiated FEC: None, Autoneg: True, Flow Control: None
ixl1: link state changed to UP
debugnet_any_ifnet_update: Bad dn_init result from ixl1 (ifp 0xfffff801085fc000), ignoring.
ugen0.2: <vendor 0x0557 product 0x7000> at usbus0
uhub1 numa-domain 0 on uhub0
uhub1: <vendor 0x0557 product 0x7000, class 9/0, rev 2.00/0.00, addr 1> on usbus0
uhub1: 4 ports with 3 removable, self powered
Root mount waiting for: usbus0
ugen0.3: <vendor 0x0557 product 0x2419> at usbus0
ukbd0 numa-domain 0 on uhub1
ukbd0: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 2> on usbus0
kbd2 at ukbd0
WARNING: reducing swap size to maximum of 65536MB per unit
nvidia1: <Unknown> numa-domain 0 on vgapci1
vgapci1: child nvidia1 requested pci_enable_io
vgapci1: child nvidia1 requested pci_enable_io
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 440.100 Fri May 29 08:11:49 UTC 2020
ioat0: <SKX IOAT> mem 0x383ffff1c000-0x383ffff1ffff irq 26 at device 4.0 numa-domain 0 on pci0
ioat0: Capabilities: f0006f1<DMA_with_DIF,PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Page_Break>
ioat1: <SKX IOAT> mem 0x383ffff18000-0x383ffff1bfff irq 27 at device 4.1 numa-domain 0 on pci0
ioat1: Capabilities: f0006f1<DMA_with_DIF,PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Page_Break>
ioat2: <SKX IOAT> mem 0x383ffff14000-0x383ffff17fff irq 26 at device 4.2 numa-domain 0 on pci0
ioat2: Capabilities: f0004f1<DMA_with_DIF,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Page_Break>
ioat3: <SKX IOAT> mem 0x383ffff10000-0x383ffff13fff irq 27 at device 4.3 numa-domain 0 on pci0
ioat3: Capabilities: f0004f1<DMA_with_DIF,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Page_Break>
ioat4: <SKX IOAT> mem 0x383ffff0c000-0x383ffff0ffff irq 26 at device 4.4 numa-domain 0 on pci0
ioat4: Capabilities: f0004f1<DMA_with_DIF,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Page_Break>
ioat5: <SKX IOAT> mem 0x383ffff08000-0x383ffff0bfff irq 27 at device 4.5 numa-domain 0 on pci0
ioat5: Capabilities: f0004f1<DMA_with_DIF,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Page_Break>
ioat6: <SKX IOAT> mem 0x383ffff04000-0x383ffff07fff irq 26 at device 4.6 numa-domain 0 on pci0
ioat6: Capabilities: f0004f1<DMA_with_DIF,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Page_Break>
ioat7: <SKX IOAT> mem 0x383ffff00000-0x383ffff03fff irq 27 at device 4.7 numa-domain 0 on pci0
ioat7: Capabilities: f0004f1<DMA_with_DIF,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Page_Break>
lo0: link state changed to UP
ums0 numa-domain 0 on uhub1
ums0: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 2> on usbus0
ums0: 3 buttons and [Z] coordinates ID=0
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to deny, logging disabled
lock order reversal:
1st 0xfffff8021e181bd8 zfs (zfs) @ /usr/src/sys/kern/vfs_mount.c:1005
2nd 0xfffff8021e1819f0 devfs (devfs) @ /usr/src/sys/kern/vfs_mount.c:1016
stack backtrace:
#0 0xffffffff80c2ec41 at witness_debugger+0x71
#1 0xffffffff80b936e8 at lockmgr_lock_flags+0x188
#2 0xffffffff80cb0304 at _vn_lock+0x54
#3 0xffffffff80c91edf at vfs_domount+0xdaf
#4 0xffffffff80c906c1 at vfs_donmount+0x871
#5 0xffffffff80c8fe19 at sys_nmount+0x69
#6 0xffffffff80ff98f0 at amd64_syscall+0x140
#7 0xffffffff80fceeae at fast_syscall_common+0xf8
Security policy loaded: MAC/ntpd (mac_ntpd)
ugen0.4: <vendor 0x1a40 USB 2.0 Hub> at usbus0
uhub2 numa-domain 0 on uhub0
uhub2: <vendor 0x1a40 USB 2.0 Hub, class 9/0, rev 2.00/1.11, addr 3> on usbus0
uhub2: 4 ports with 4 removable, self powered
ugen0.5: <vendor 0x05e3 USB2.0 Hub> at usbus0
uhub3 numa-domain 0 on uhub2
uhub3: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/32.98, addr 4> on usbus0
uhub3: 4 ports with 4 removable, self powered
ugen0.6: <SIGMACHIP USB Keyboard> at usbus0
ukbd1 numa-domain 0 on uhub3
ukbd1: <SIGMACHIP USB Keyboard, class 0/0, rev 1.10/1.11, addr 5> on usbus0
kbd3 at ukbd1
uhid0 numa-domain 0 on uhub3
uhid0: <SIGMACHIP USB Keyboard, class 0/0, rev 1.10/1.11, addr 5> on usbus0
ugen0.7: <Logitech USB Optical Mouse> at usbus0
ums1 numa-domain 0 on uhub3
ums1: <Logitech USB Optical Mouse, class 0/0, rev 2.00/72.00, addr 6> on usbus0
ums1: 3 buttons and [XYZ] coordinates ID=0
ugen0.8: <Harman Multimedia JBL Pebbles> at usbus0
uhid1 numa-domain 0 on uhub3
uhid1: <Harman Multimedia JBL Pebbles, class 0/0, rev 1.10/1.00, addr 7> on usbus0
uaudio0 numa-domain 0 on uhub3
uaudio0: <Harman Multimedia JBL Pebbles, class 0/0, rev 1.10/1.00, addr 7> on usbus0
uaudio0: Play[0]: 48000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer.
uaudio0: No recording.
uaudio0: No MIDI sequencer.
pcm3: <USB audio> numa-domain 0 on uaudio0
uaudio0: HID volume keys found.
acquiring duplicate lock of same type: "os.lock_mtx"
1st os.lock_mtx @ nvidia_os.c:900
2nd os.lock_mtx @ nvidia_os.c:900
stack backtrace:
#0 0xffffffff80c2ec41 at witness_debugger+0x71
#1 0xffffffff80b9fc24 at __mtx_lock_flags+0x94
#2 0xffffffff832bc77b at os_acquire_spinlock+0x1b
#3 0xffffffff831ca14c at _nv033412rm+0xc
acquiring duplicate lock of same type: "os.lock_sx"
1st os.lock_sx @ nvidia_os.c:663
2nd os.lock_sx @ nvidia_os.c:663
stack backtrace:
#0 0xffffffff80c2ec41 at witness_debugger+0x71
#1 0xffffffff80bcbfe7 at _sx_xlock+0x67
#2 0xffffffff832bc252 at os_acquire_mutex+0x32
#3 0xffffffff82e506ee at _nv034842rm+0x1e
ugen0.4: <vendor 0x1a40 USB 2.0 Hub> at usbus0 (disconnected)
uhub2: at uhub0, port 8, addr 3 (disconnected)
ugen0.5: <vendor 0x05e3 USB2.0 Hub> at usbus0 (disconnected)
uhub3: at uhub2, port 1, addr 4 (disconnected)
ugen0.6: <SIGMACHIP USB Keyboard> at usbus0 (disconnected)
ukbd1: at uhub3, port 1, addr 5 (disconnected)
ukbd1: detached
uhid0: at uhub3, port 1, addr 5 (disconnected)
uhid0: detached
ugen0.7: <Logitech USB Optical Mouse> at usbus0 (disconnected)
ums1: at uhub3, port 2, addr 6 (disconnected)
ums1: detached
ugen0.8: <Harman Multimedia JBL Pebbles> at usbus0 (disconnected)
uaudio0: at uhub3, port 4, addr 7 (disconnected)
pcm3: detached
uaudio0: detached
uhid1: at uhub3, port 4, addr 7 (disconnected)
uhid1: detached
uhub3: detached
uhub2: detached
ugen0.4: <vendor 0x1a40 USB 2.0 Hub> at usbus0
uhub2 numa-domain 0 on uhub0
uhub2: <vendor 0x1a40 USB 2.0 Hub, class 9/0, rev 2.00/1.11, addr 8> on usbus0
uhub2: 4 ports with 4 removable, self powered
ugen0.5: <vendor 0x05e3 USB2.0 Hub> at usbus0
uhub3 numa-domain 0 on uhub2
uhub3: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/32.98, addr 9> on usbus0
uhub3: 4 ports with 4 removable, self powered
ugen0.6: <SIGMACHIP USB Keyboard> at usbus0
ukbd1 numa-domain 0 on uhub3
ukbd1: <SIGMACHIP USB Keyboard, class 0/0, rev 1.10/1.11, addr 10> on usbus0
kbd3 at ukbd1
uhid0 numa-domain 0 on uhub3
uhid0: <SIGMACHIP USB Keyboard, class 0/0, rev 1.10/1.11, addr 10> on usbus0
ugen0.7: <Logitech USB Optical Mouse> at usbus0
ums1 numa-domain 0 on uhub3
ums1: <Logitech USB Optical Mouse, class 0/0, rev 2.00/72.00, addr 11> on usbus0
ums1: 3 buttons and [XYZ] coordinates ID=0
ugen0.8: <Harman Multimedia JBL Pebbles> at usbus0
uaudio0 numa-domain 0 on uhub3
uaudio0: <Harman Multimedia JBL Pebbles, class 0/0, rev 1.10/1.00, addr 12> on usbus0
uaudio0: Play[0]: 48000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer.
uaudio0: No recording.
uaudio0: No MIDI sequencer.
pcm3: <USB audio> numa-domain 0 on uaudio0
uaudio0: HID volume keys found.
ugen0.4: <vendor 0x1a40 USB 2.0 Hub> at usbus0 (disconnected)
uhub2: at uhub0, port 8, addr 8 (disconnected)
ugen0.5: <vendor 0x05e3 USB2.0 Hub> at usbus0 (disconnected)
uhub3: at uhub2, port 1, addr 9 (disconnected)
ugen0.6: <SIGMACHIP USB Keyboard> at usbus0 (disconnected)
ukbd1: at uhub3, port 1, addr 10 (disconnected)
ukbd1: detached
uhid0: at uhub3, port 1, addr 10 (disconnected)
uhid0: detached
ugen0.7: <Logitech USB Optical Mouse> at usbus0 (disconnected)
ums1: at uhub3, port 2, addr 11 (disconnected)
ums1: detached
ugen0.8: <Harman Multimedia JBL Pebbles> at usbus0 (disconnected)
uaudio0: at uhub3, port 4, addr 12 (disconnected)
pcm3: detached
uaudio0: detached
uhub3: detached
uhub2: detached
ugen0.4: <vendor 0x1a40 USB 2.0 Hub> at usbus0
uhub2 numa-domain 0 on uhub0
uhub2: <vendor 0x1a40 USB 2.0 Hub, class 9/0, rev 2.00/1.11, addr 13> on usbus0
uhub2: 4 ports with 4 removable, self powered
ugen0.5: <vendor 0x05e3 USB2.0 Hub> at usbus0
uhub3 numa-domain 0 on uhub2
uhub3: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/32.98, addr 14> on usbus0
uhub3: 4 ports with 4 removable, self powered
ugen0.6: <SIGMACHIP USB Keyboard> at usbus0
ukbd1 numa-domain 0 on uhub3
ukbd1: <SIGMACHIP USB Keyboard, class 0/0, rev 1.10/1.11, addr 15> on usbus0
kbd3 at ukbd1
uhid0 numa-domain 0 on uhub3
uhid0: <SIGMACHIP USB Keyboard, class 0/0, rev 1.10/1.11, addr 15> on usbus0
ugen0.7: <Logitech USB Optical Mouse> at usbus0
ums1 numa-domain 0 on uhub3
ums1: <Logitech USB Optical Mouse, class 0/0, rev 2.00/72.00, addr 16> on usbus0
ums1: 3 buttons and [XYZ] coordinates ID=0
ugen0.8: <Harman Multimedia JBL Pebbles> at usbus0
uaudio0 numa-domain 0 on uhub3
uaudio0: <Harman Multimedia JBL Pebbles, class 0/0, rev 1.10/1.00, addr 17> on usbus0
uaudio0: Play[0]: 48000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer.
uaudio0: No recording.
uaudio0: No MIDI sequencer.
pcm3: <USB audio> numa-domain 0 on uaudio0
uaudio0: HID volume keys found.
ugen0.4: <vendor 0x1a40 USB 2.0 Hub> at usbus0 (disconnected)
uhub2: at uhub0, port 8, addr 13 (disconnected)
ugen0.5: <vendor 0x05e3 USB2.0 Hub> at usbus0 (disconnected)
uhub3: at uhub2, port 1, addr 14 (disconnected)
ugen0.6: <SIGMACHIP USB Keyboard> at usbus0 (disconnected)
ukbd1: at uhub3, port 1, addr 15 (disconnected)
ukbd1: detached
uhid0: at uhub3, port 1, addr 15 (disconnected)
uhid0: detached
ugen0.7: <Logitech USB Optical Mouse> at usbus0 (disconnected)
ums1: at uhub3, port 2, addr 16 (disconnected)
ums1: detached
ugen0.8: <Harman Multimedia JBL Pebbles> at usbus0 (disconnected)
uaudio0: at uhub3, port 4, addr 17 (disconnected)
pcm3: detached
uaudio0: detached
uhub3: detached
uhub2: detached
ugen0.4: <vendor 0x1a40 USB 2.0 Hub> at usbus0
uhub2 numa-domain 0 on uhub0
uhub2: <vendor 0x1a40 USB 2.0 Hub, class 9/0, rev 2.00/1.11, addr 18> on usbus0
uhub2: 4 ports with 4 removable, self powered
ugen0.5: <vendor 0x05e3 USB2.0 Hub> at usbus0
uhub3 numa-domain 0 on uhub2
uhub3: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/32.98, addr 19> on usbus0
uhub3: 4 ports with 4 removable, self powered
ugen0.6: <SIGMACHIP USB Keyboard> at usbus0
ukbd1 numa-domain 0 on uhub3
ukbd1: <SIGMACHIP USB Keyboard, class 0/0, rev 1.10/1.11, addr 20> on usbus0
kbd3 at ukbd1
uhid0 numa-domain 0 on uhub3
uhid0: <SIGMACHIP USB Keyboard, class 0/0, rev 1.10/1.11, addr 20> on usbus0
ugen0.7: <Logitech USB Optical Mouse> at usbus0
ums1 numa-domain 0 on uhub3
ums1: <Logitech USB Optical Mouse, class 0/0, rev 2.00/72.00, addr 21> on usbus0
ums1: 3 buttons and [XYZ] coordinates ID=0
ugen0.8: <Harman Multimedia JBL Pebbles> at usbus0
uaudio0 numa-domain 0 on uhub3
uaudio0: <Harman Multimedia JBL Pebbles, class 0/0, rev 1.10/1.00, addr 22> on usbus0
uaudio0: Play[0]: 48000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer.
uaudio0: No recording.
uaudio0: No MIDI sequencer.
pcm3: <USB audio> numa-domain 0 on uaudio0
uaudio0: HID volume keys found.
ugen0.4: <vendor 0x1a40 USB 2.0 Hub> at usbus0 (disconnected)
uhub2: at uhub0, port 8, addr 18 (disconnected)
ugen0.5: <vendor 0x05e3 USB2.0 Hub> at usbus0 (disconnected)
uhub3: at uhub2, port 1, addr 19 (disconnected)
ugen0.6: <SIGMACHIP USB Keyboard> at usbus0 (disconnected)
ukbd1: at uhub3, port 1, addr 20 (disconnected)
ukbd1: detached
uhid0: at uhub3, port 1, addr 20 (disconnected)
uhid0: detached
ugen0.7: <Logitech USB Optical Mouse> at usbus0 (disconnected)
ums1: at uhub3, port 2, addr 21 (disconnected)
ums1: detached
ugen0.8: <Harman Multimedia JBL Pebbles> at usbus0 (disconnected)
uaudio0: at uhub3, port 4, addr 22 (disconnected)
pcm3: detached
uaudio0: detached
uhub3: detached
uhub2: detached
ugen0.4: <vendor 0x1a40 USB 2.0 Hub> at usbus0
uhub2 numa-domain 0 on uhub0
uhub2: <vendor 0x1a40 USB 2.0 Hub, class 9/0, rev 2.00/1.11, addr 23> on usbus0
uhub2: 4 ports with 4 removable, self powered
ugen0.5: <vendor 0x05e3 USB2.0 Hub> at usbus0
uhub3 numa-domain 0 on uhub2
uhub3: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/32.98, addr 24> on usbus0
uhub3: 4 ports with 4 removable, self powered
ugen0.6: <SIGMACHIP USB Keyboard> at usbus0
ukbd1 numa-domain 0 on uhub3
ukbd1: <SIGMACHIP USB Keyboard, class 0/0, rev 1.10/1.11, addr 25> on usbus0
kbd3 at ukbd1
uhid0 numa-domain 0 on uhub3
uhid0: <SIGMACHIP USB Keyboard, class 0/0, rev 1.10/1.11, addr 25> on usbus0
ugen0.7: <Logitech USB Optical Mouse> at usbus0
ums1 numa-domain 0 on uhub3
ums1: <Logitech USB Optical Mouse, class 0/0, rev 2.00/72.00, addr 26> on usbus0
ums1: 3 buttons and [XYZ] coordinates ID=0
ugen0.8: <Harman Multimedia JBL Pebbles> at usbus0
uaudio0 numa-domain 0 on uhub3
uaudio0: <Harman Multimedia JBL Pebbles, class 0/0, rev 1.10/1.00, addr 27> on usbus0
uaudio0: Play[0]: 48000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer.
uaudio0: No recording.
uaudio0: No MIDI sequencer.
pcm3: <USB audio> numa-domain 0 on uaudio0
uaudio0: HID volume keys found.
ugen0.4: <vendor 0x1a40 USB 2.0 Hub> at usbus0 (disconnected)
uhub2: at uhub0, port 8, addr 23 (disconnected)
ugen0.5: <vendor 0x05e3 USB2.0 Hub> at usbus0 (disconnected)
uhub3: at uhub2, port 1, addr 24 (disconnected)
ugen0.6: <SIGMACHIP USB Keyboard> at usbus0 (disconnected)
ukbd1: at uhub3, port 1, addr 25 (disconnected)
ukbd1: detached
uhid0: at uhub3, port 1, addr 25 (disconnected)
uhid0: detached
ugen0.7: <Logitech USB Optical Mouse> at usbus0 (disconnected)
ums1: at uhub3, port 2, addr 26 (disconnected)
ums1: detached
ugen0.8: <Harman Multimedia JBL Pebbles> at usbus0 (disconnected)
uaudio0: at uhub3, port 4, addr 27 (disconnected)
pcm3: detached
uaudio0: detached
uhub3: detached
uhub2: detached
ugen0.4: <vendor 0x1a40 USB 2.0 Hub> at usbus0
uhub2 numa-domain 0 on uhub0
uhub2: <vendor 0x1a40 USB 2.0 Hub, class 9/0, rev 2.00/1.11, addr 28> on usbus0
uhub2: 4 ports with 4 removable, self powered
ugen0.5: <vendor 0x05e3 USB2.0 Hub> at usbus0
uhub3 numa-domain 0 on uhub2
uhub3: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/32.98, addr 29> on usbus0
uhub3: 4 ports with 4 removable, self powered
ugen0.6: <SIGMACHIP USB Keyboard> at usbus0
ukbd1 numa-domain 0 on uhub3
ukbd1: <SIGMACHIP USB Keyboard, class 0/0, rev 1.10/1.11, addr 30> on usbus0
kbd3 at ukbd1
uhid0 numa-domain 0 on uhub3
uhid0: <SIGMACHIP USB Keyboard, class 0/0, rev 1.10/1.11, addr 30> on usbus0
ugen0.7: <Logitech USB Optical Mouse> at usbus0
ums1 numa-domain 0 on uhub3
ums1: <Logitech USB Optical Mouse, class 0/0, rev 2.00/72.00, addr 31> on usbus0
ums1: 3 buttons and [XYZ] coordinates ID=0
ugen0.8: <Harman Multimedia JBL Pebbles> at usbus0
uaudio0 numa-domain 0 on uhub3
uaudio0: <Harman Multimedia JBL Pebbles, class 0/0, rev 1.10/1.00, addr 32> on usbus0
uaudio0: Play[0]: 48000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer.
uaudio0: No recording.
uaudio0: No MIDI sequencer.
pcm3: <USB audio> numa-domain 0 on uaudio0
uaudio0: HID volume keys found.
ugen0.4: <vendor 0x1a40 USB 2.0 Hub> at usbus0 (disconnected)
uhub2: at uhub0, port 8, addr 28 (disconnected)
ugen0.5: <vendor 0x05e3 USB2.0 Hub> at usbus0 (disconnected)
uhub3: at uhub2, port 1, addr 29 (disconnected)
ugen0.6: <SIGMACHIP USB Keyboard> at usbus0 (disconnected)
ukbd1: at uhub3, port 1, addr 30 (disconnected)
ukbd1: detached
uhid0: at uhub3, port 1, addr 30 (disconnected)
uhid0: detached
ugen0.7: <Logitech USB Optical Mouse> at usbus0 (disconnected)
ums1: at uhub3, port 2, addr 31 (disconnected)
ums1: detached
ugen0.8: <Harman Multimedia JBL Pebbles> at usbus0 (disconnected)
uaudio0: at uhub3, port 4, addr 32 (disconnected)
pcm3: detached
uaudio0: detached
uhub3: detached
uhub2: detached
ugen0.4: <vendor 0x1a40 USB 2.0 Hub> at usbus0
uhub2 numa-domain 0 on uhub0
uhub2: <vendor 0x1a40 USB 2.0 Hub, class 9/0, rev 2.00/1.11, addr 33> on usbus0
uhub2: 4 ports with 4 removable, self powered
ugen0.5: <vendor 0x05e3 USB2.0 Hub> at usbus0
uhub3 numa-domain 0 on uhub2
uhub3: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/32.98, addr 34> on usbus0
uhub3: 4 ports with 4 removable, self powered
ugen0.6: <SIGMACHIP USB Keyboard> at usbus0
ukbd1 numa-domain 0 on uhub3
ukbd1: <SIGMACHIP USB Keyboard, class 0/0, rev 1.10/1.11, addr 35> on usbus0
kbd3 at ukbd1
uhid0 numa-domain 0 on uhub3
uhid0: <SIGMACHIP USB Keyboard, class 0/0, rev 1.10/1.11, addr 35> on usbus0
ugen0.7: <Logitech USB Optical Mouse> at usbus0
ums1 numa-domain 0 on uhub3
ums1: <Logitech USB Optical Mouse, class 0/0, rev 2.00/72.00, addr 36> on usbus0
ums1: 3 buttons and [XYZ] coordinates ID=0
ugen0.8: <Harman Multimedia JBL Pebbles> at usbus0
uaudio0 numa-domain 0 on uhub3
uaudio0: <Harman Multimedia JBL Pebbles, class 0/0, rev 1.10/1.00, addr 37> on usbus0
uaudio0: Play[0]: 48000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer.
uaudio0: No recording.
uaudio0: No MIDI sequencer.
pcm3: <USB audio> numa-domain 0 on uaudio0
uaudio0: HID volume keys found.
ugen0.4: <vendor 0x1a40 USB 2.0 Hub> at usbus0 (disconnected)
uhub2: at uhub0, port 8, addr 33 (disconnected)
ugen0.5: <vendor 0x05e3 USB2.0 Hub> at usbus0 (disconnected)
uhub3: at uhub2, port 1, addr 34 (disconnected)
ugen0.6: <SIGMACHIP USB Keyboard> at usbus0 (disconnected)
ukbd1: at uhub3, port 1, addr 35 (disconnected)
ukbd1: detached
uhid0: at uhub3, port 1, addr 35 (disconnected)
uhid0: detached
ugen0.7: <Logitech USB Optical Mouse> at usbus0 (disconnected)
ums1: at uhub3, port 2, addr 36 (disconnected)
ums1: detached
ugen0.8: <Harman Multimedia JBL Pebbles> at usbus0 (disconnected)
uaudio0: at uhub3, port 4, addr 37 (disconnected)
pcm3: detached
uaudio0: detached
uhub3: detached
uhub2: detached
ugen0.4: <vendor 0x1a40 USB 2.0 Hub> at usbus0
uhub2 numa-domain 0 on uhub0
uhub2: <vendor 0x1a40 USB 2.0 Hub, class 9/0, rev 2.00/1.11, addr 38> on usbus0
uhub2: 4 ports with 4 removable, self powered
ugen0.5: <vendor 0x05e3 USB2.0 Hub> at usbus0
uhub3 numa-domain 0 on uhub2
uhub3: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/32.98, addr 39> on usbus0
uhub3: 4 ports with 4 removable, self powered
ugen0.6: <SIGMACHIP USB Keyboard> at usbus0
ukbd1 numa-domain 0 on uhub3
ukbd1: <SIGMACHIP USB Keyboard, class 0/0, rev 1.10/1.11, addr 40> on usbus0
kbd3 at ukbd1
uhid0 numa-domain 0 on uhub3
uhid0: <SIGMACHIP USB Keyboard, class 0/0, rev 1.10/1.11, addr 40> on usbus0
ugen0.7: <Logitech USB Optical Mouse> at usbus0
ums1 numa-domain 0 on uhub3
ums1: <Logitech USB Optical Mouse, class 0/0, rev 2.00/72.00, addr 41> on usbus0
ums1: 3 buttons and [XYZ] coordinates ID=0
ugen0.8: <Harman Multimedia JBL Pebbles> at usbus0
uaudio0 numa-domain 0 on uhub3
uaudio0: <Harman Multimedia JBL Pebbles, class 0/0, rev 1.10/1.00, addr 42> on usbus0
uaudio0: Play[0]: 48000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer.
uaudio0: No recording.
uaudio0: No MIDI sequencer.
pcm3: <USB audio> numa-domain 0 on uaudio0
uaudio0: HID volume keys found.
ugen0.4: <vendor 0x1a40 USB 2.0 Hub> at usbus0 (disconnected)
uhub2: at uhub0, port 2, addr 38 (disconnected)
ugen0.5: <vendor 0x05e3 USB2.0 Hub> at usbus0 (disconnected)
uhub3: at uhub2, port 1, addr 39 (disconnected)
ugen0.6: <SIGMACHIP USB Keyboard> at usbus0 (disconnected)
ukbd1: at uhub3, port 1, addr 40 (disconnected)
ukbd1: detached
uhid0: at uhub3, port 1, addr 40 (disconnected)
uhid0: detached
ugen0.7: <Logitech USB Optical Mouse> at usbus0 (disconnected)
ums1: at uhub3, port 2, addr 41 (disconnected)
ums1: detached
ugen0.8: <Harman Multimedia JBL Pebbles> at usbus0 (disconnected)
uaudio0: at uhub3, port 4, addr 42 (disconnected)
pcm3: detached
uaudio0: detached
uhub3: detached
uhub2: detached
>
> > EndSection
> >
> > Section "Files"
> > ModulePath "/usr/local/lib/xorg/modules"
> > FontPath "/usr/local/share/fonts/misc/"
> > FontPath "/usr/local/share/fonts/TTF/"
> > FontPath "/usr/local/share/fonts/OTF/"
> > FontPath "/usr/local/share/fonts/Type1/"
> > FontPath "/usr/local/share/fonts/100dpi/"
> > FontPath "/usr/local/share/fonts/75dpi/"
> > FontPath "catalogue:/usr/local/etc/X11/fontpath.d"
> > EndSection
> >
> > Section "Module"
> > Load "glxserver_nvidia"
> > Load "glx"
> > EndSection
> >
> > Section "InputDevice"
> > Identifier "Keyboard0"
> > Driver "kbd"
> > EndSection
> >
> > Section "InputDevice"
> > Identifier "Mouse0"
> > Driver "mouse"
> > Option "Protocol" "auto"
> > Option "Device" "/dev/sysmouse"
> > Option "ZAxisMapping" "4 5 6 7"
> > EndSection
>
> Remove the two sections above.
>
> >
> > Section "Monitor"
> > Identifier "Monitor0"
> > VendorName "Monitor Vendor"
> > ModelName "Monitor Model"
> > HorizSync 28.0 - 33.0
> > VertRefresh 43.0 - 72.0
> > Option "DPMS"
> > EndSection
> >
> > Section "Monitor"
> > Identifier "Monitor1"
> > VendorName "Monitor Vendor"
> > ModelName "Monitor Model"
> > HorizSync 28.0 - 33.0
> > VertRefresh 43.0 - 72.0
> > Option "DPMS"
> > EndSection
> >
> > Section "Device"
> > Identifier "Card0"
> > Driver "nvidia"
> > BusID "PCI:101:0:0"
> > EndSection
> >
> > Section "Device"
> >
> > ### Available Driver options are:-
> > ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
> > ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
> > ### <percent>: "<f>%"
> > ### [arg]: arg optional
> > #Option "SWcursor" # [<bool>]
> > #Option "kmsdev" # <str>
> > #Option "ShadowFB" # [<bool>]
> > #Option "AccelMethod" # <str>
> > #Option "PageFlip" # [<bool>]
> > #Option "ZaphodHeads" # <str>
> > #Option "DoubleShadow" # [<bool>]
> > #Option "Atomic" # [<bool>]
> > Identifier "Card1"
> > Driver "nvidia"
> > BusID "PCI:3:0:0"
> > EndSection
> >
> > Section "Screen"
> > Identifier "Screen0"
> > Device "Card0"
> > Monitor "Monitor0"
> > DefaultDepth 24
> > SubSection "Display"
> > Viewport 0 0
> > Depth 1
> > EndSubSection
> > SubSection "Display"
> > Viewport 0 0
> > Depth 4
> > EndSubSection
> > SubSection "Display"
> > Viewport 0 0
> > Depth 8
> > EndSubSection
> > SubSection "Display"
> > Viewport 0 0
> > Depth 15
> > EndSubSection
> > SubSection "Display"
> > Viewport 0 0
> > Depth 16
> > EndSubSection
> > SubSection "Display"
> > Viewport 0 0
> > Depth 24
> > Modes "1920x1080"
> > EndSubSection
> > EndSection
> >
> > Section "Screen"
> > Identifier "Screen1"
> > Device "Card1"
> > Monitor "Monitor1"
> > DefaultDepth 24
> > SubSection "Display"
> > Viewport 0 0
> > Depth 1
> > EndSubSection
> > SubSection "Display"
> > Viewport 0 0
> > Depth 4
> > EndSubSection
> > SubSection "Display"
> > Viewport 0 0
> > Depth 8
> > EndSubSection
> > SubSection "Display"
> > Viewport 0 0
> > Depth 15
> > EndSubSection
> > SubSection "Display"
> > Viewport 0 0
> > Depth 16
> > EndSubSection
> > SubSection "Display"
> > Viewport 0 0
> > Depth 24
> > Modes "1920x1080"
> > EndSubSection
> > EndSection
> >
>
> Regards
> --
> Niclas
>
> _______________________________________________
> freebsd-x11@freebsd.org mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-x11
> To unsubscribe, send any mail to "freebsd-x11-unsubscribe@freebsd.org"
>
Regards.
---
Kazuhiko Kiriyama <kiri@truefc.org>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?202009211054.08LAseE4070179>