Date: Wed, 19 Dec 2001 08:52:33 +0100 (CET) From: Danilo Godec <danci@agenda.si> To: sbarthfr <sbarthfr@yahoo.fr> Cc: <aic7xxx@freebsd.org> Subject: Re: 29160, dat24e and kernel 2.4.7 problem Message-ID: <Pine.LNX.4.30.0112190851010.28400-100000@duplo.agenda.si> In-Reply-To: <9vl5f3%2Bq55t@eGroups.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, 17 Dec 2001, sbarthfr wrote: > I would like to use a 29160 SCSI card to drive my HP DAT24 (external) > with a RedHat 7.2. There is a problem when I try to use the /dev/st0 > device: > > (1) there's a "attached devices: none" in the /proc/scsi/scsi file > > (2) when I try a "mt -f /dev/st0 stat" I've got the > message "/dev/st0: No such device" > > (3) the "dmesg" on my system is > > SCSI subsystem driver Revision: 1.00 > PCI: Found IRQ 9 for device 00:12.0 > PCI: Sharing IRQ 9 with 00:09.0 > (scsi0) <Adaptec AIC-7892 Ultra 160/m SCSI host adapter> found at PCI > 0/18/0 > (scsi0) Wide Channel, SCSI ID=7, 32/255 SCBs > (scsi0) Downloading sequencer code... 396 instructions downloaded > scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.2.4/5.2.0 > <Adaptec AIC-7892 Ultra 160/m SCSI host adapter> > Vendor: HP Model: C1537A Rev: L105 > Type: Sequential-Access ANSI SCSI revision: 02 > scsi : 0 hosts left. > > What's the problem ? Can someone help me ? If you use modules, do you have st.o module loaded? If you don't use modules, you should have st (SCSI tape) support compiled in the kernel. Then you should see device /dev/st0 and /dev/nst0. D. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe aic7xxx" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.LNX.4.30.0112190851010.28400-100000>