Date: Mon, 22 May 2000 21:01:52 -0400 From: "Otter" <otter@otter.cc> To: "Liotta, Bob" <bLiotta@USCO.com>, "'questions@Freebsd.org'" <questions@FreeBSD.ORG> Subject: RE: I have an SMP Problem Message-ID: <NIEJLGLKBDJHNLKBAKPDCEBPCBAA.otter@otter.cc> In-Reply-To: <A1335534778DD311991300A0C9F3B3F2DEC3D1@ntnau220.usco.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Bob, You're either contradicting yourself or not making yourself clear. Does it lock up at random or when the 2nd cpu is starting up? ...Or does it do it in the same time frame, only not all the time? If it works fine with one processor, have you swapped processors to try them both? This would give you a good idea that both processors are functional. Maybe it's a problem with the 2nd cpu slot. *shrug* You need to give up more info and/or do some more testing. -Otter obnoxious sig files available for an additional fee > -----Original Message----- > From: owner-freebsd-questions@FreeBSD.ORG > [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Liotta, Bob > Sent: Monday, May 22, 2000 5:39 PM > To: 'questions@Freebsd.org' > Subject: I have an SMP Problem > > > Folks, > > I have an HP LC2000r 2 CPU System. I built an SMP Kernel > for 4.0 and during > the boot stage, it > randomly locks up. My guess is it hangs when trying to > start the 2nd CPU. > I have other recent > models of the HP NetServer and they work fine. I currently > have this > working on LC3 Servers. > Not sure what the problem is. It will boot with a single > processor though. > I have attached an > mptable listing. Any ideas would be appreciated. > > Thanks. > > Bob > > > > > > ============================================================ > ================ > === > > MPTable, version 2.0.15 > > looking for EBDA pointer @ 0x040e, found, searching EBDA @ > 0x0009e800 > searching CMOS 'top of mem' @ 0x0009e400 (633K) > searching default 'top of mem' @ 0x0009fc00 (639K) > searching BIOS @ 0x000f0000 > > MP FPS found in BIOS @ physical addr: 0x000f7970 > > ------------------------------------------------------------ > ---------------- > --- > > MP Floating Pointer Structure: > > location: BIOS > physical address: 0x000f7970 > signature: '_MP_' > length: 16 bytes > version: 1.4 > checksum: 0x4e > mode: Virtual Wire > ------------------------------------------------------------ > ---------------- > --- > > MP Config Table Header: > > physical address: 0x0009e960 > signature: 'PCMP' > base table length: 356 > version: 1.4 > checksum: 0xde > OEM ID: 'HP ' > Product ID: 'LC 2000 ' > OEM table pointer: 0x00000000 > OEM table size: 0 > entry count: 36 > local APIC address: 0xfee00000 > extended table length: 272 > extended table checksum: 248 > > ------------------------------------------------------------ > ---------------- > --- > > MP Config Base Table Entries: > > > -- > Processors: APIC ID Version State Family Model Step > Flags > 1 0x11 BSP, usable 6 8 1 > 0x387fb > ff > 0 0x11 AP, usable 6 8 1 > 0x387fb > ff > -- > Bus: Bus ID Type > 0 PCI > 1 PCI > 2 PCI > 3 PCI > 4 PCI > 5 PCI > 6 ISA > -- > I/O APICs: APIC ID Version State Address > 2 0x11 usable 0xfec00000 > 3 0x11 usable 0xfec01000 > -- > I/O Ints: Type Polarity Trigger Bus ID > IRQ APIC ID PIN# > ExtINT active-hi edge 6 > 0 2 0 > INT active-hi edge 6 > 1 2 1 > INT active-hi edge 6 > 2 2 2 > INT active-hi edge 6 > 3 2 3 > INT active-hi edge 6 > 4 2 4 > INT active-lo level 6 > 5 2 5 > INT active-hi edge 6 > 6 2 6 > INT active-hi edge 6 > 7 2 7 > INT active-hi edge 6 > 8 2 8 > INT active-lo level 6 > 9 2 9 > INT active-lo level 6 > 10 2 10 > INT active-lo level 6 > 11 2 11 > INT active-hi edge 6 > 12 2 12 > INT active-hi edge 6 > 13 2 13 > INT active-hi edge 6 > 14 2 14 > INT active-hi edge 6 > 15 2 15 > INT active-lo level 0 > 2:A 3 0 > INT active-lo level 0 > 3:A 3 1 > INT active-lo level 0 > 4:A 3 2 > INT active-lo level 0 > 5:A 3 3 > INT active-lo level 3 > 2:A 3 4 > INT active-lo level 3 > 6:A 3 8 > INT active-lo level 3 > 6:B 3 9 > -- > Local Ints: Type Polarity Trigger Bus ID > IRQ APIC ID PIN# > ExtINT active-hi edge 6 > 0 255 0 > NMI active-hi edge 0 > 0:A 255 1 > > ------------------------------------------------------------ > ---------------- > --- > > MP Config Extended Table Entries: > > -- > > bus ID: 0 address type: I/O address > address base: 0x0 > address range: 0x2000 > -- > > bus ID: 3 address type: I/O address > address base: 0x2000 > address range: 0x900 > -- > > bus ID: 0 address type: I/O address > address base: 0x2900 > address range: 0xd700 > -- > > bus ID: 0 address type: memory address > address base: 0x80000000 > address range: 0x7d000000 > -- > > bus ID: 3 address type: memory address > address base: 0xfd000000 > address range: 0x10000 > -- > > bus ID: 0 address type: memory address > address base: 0xfd010000 > address range: 0x1df0000 > -- > > bus ID: 0 address type: memory address > address base: 0xfef00000 > address range: 0x1100000 > -- > > bus ID: 0 address type: memory address > address base: 0xa0000 > address range: 0x20000 > -- > > bus ID: 0 address type: memory address > address base: 0xd0000 > address range: 0x10000 > -- > > bus ID: 0 address type: memory address > address base: 0xf00000 > address range: 0x100000 > -- > > bus ID: 1 bus info: 0x00 parent bus ID: 0-- > > bus ID: 2 bus info: 0x00 parent bus ID: 0-- > > bus ID: 4 bus info: 0x00 parent bus ID: 3-- > > bus ID: 5 bus info: 0x00 parent bus ID: 3-- > > > bus ID: 6 bus info: 0x01 parent bus ID: 0-- > > bus ID: 0 address modifier: add > predefined range: 0x00000000-- > > bus ID: 0 address modifier: add > predefined range: 0x00000001-- > > bus ID: 3 address modifier: subtract > predefined range: 0x00000000-- > > bus ID: 3 address modifier: subtract > predefined range: 0x00000001 > ------------------------------------------------------------ > ---------------- > --- > > # SMP kernel config file options: > > > # Required: > options SMP # Symmetric > MultiProcessor Kernel > options APIC_IO # Symmetric (APIC) I/O > # Optional (built-in defaults will work in most cases): > #options NCPU=2 # number of CPUs > #options NBUS=7 # number of busses > #options NAPIC=2 # number of IO APICs > #options NINTR=24 # number of INTs > > ------------------------------------------------------------ > ---------------- > --- > > > > > > > > > > > > > > > > > > Bob Liotta > Internet Services Champion > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?NIEJLGLKBDJHNLKBAKPDCEBPCBAA.otter>