Date: Tue, 4 Jan 2011 22:38:27 -0800 From: Jeremy Chadwick <freebsd@jdc.parodius.com> To: Beach Geek <labeachgeek@gmail.com> Cc: "freebsd-stable@freebsd.org" <freebsd-stable@freebsd.org> Subject: Re: usb errors with 8 stable Message-ID: <20110105063827.GA28092@icarus.home.lan> In-Reply-To: <AANLkTi=cewU4Ky0-__ahg4BqcPwRU__FHsBGbYsASSTW@mail.gmail.com> References: <AANLkTimATi6aQy9r8PG5GLKhdMAexD0y77%2Bot=FqCjmp@mail.gmail.com> <AANLkTinbBQOTXaJj=B0ZFd8jCasFCQ5PjLZACTD4oiv=@mail.gmail.com> <AANLkTikm2WfO7MZe=Ece6fkJvcVAs8HCUb0LPXtpDGGN@mail.gmail.com> <AANLkTinq2RKNrV9t9WdGmv3VjJd5=BWcv0N-mwhpJtRr@mail.gmail.com> <AANLkTi=cewU4Ky0-__ahg4BqcPwRU__FHsBGbYsASSTW@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, Jan 04, 2011 at 11:37:48PM -0600, Beach Geek wrote: > Compaq Presario 5xxx 2GHz > FreeBSD 8 r216866 Tue Jan 4 2011 > (rm -rf /usr/obj/* & make cleandir run before build) > > When plugging in devices that worked earlier, none ever show up as devices > in /dev. (2 examples listed below with error messages) > The devices work on an old Gateway box (450MHz) running FreeBSD 8 r216359 > built Dec 11th (same build the laptop had). I loaded files on the thumb > drives & Android phone using the Gateway before hitting the road. > > I'm not sure if it's the update or hardware failure. I only have the laptop, > phone, and 4 usbdrives... no other hardware available. > > Messages from 2 of the devices when plugged in; no messages when unplugged. > Device: Samsung m900 Android phone (Moment) > usbus2: port reset timeout > uhub_reattach_port: port 1 reset failed, error=USB_ERR_TIMEOUT > uhub_reattach_port: device problem (USB_ERR_TIMEOUT), disabling port 1 > > Device: Verbatim 4GB thumb drive > usb_alloc_device: set address 2 failed (USB_ERR_IOERROR, ignored) > usbd_setup_device_desc: getting device descriptor at addr 2 failed, > USB_ERR_IOERROR > usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_IOERROR, > ignored) > usbd_setup_device_desc: getting device descriptor at addr 2 failed, > USB_ERR_IOERROR > ... above 2 messages repeated... > ugen0.2: <Unknown> at usbus0 (disconnected) > uhub_reattach_port: could not allocate new device > > Any pointers or links to what could have changed in stable or any other > suggestions. > > There aren't any usb options in BIOS. > > I can provide more info, but please remember I'm using a 4inch screen and a > keyboard that fits in one hand. ;-) > That's one reason I didn't include pciconf or usbconfig. I'm hoping it was > simply some commit I missed or a pointyhat mistake. Three weeks in the > middle of nowhere with a hardware failure... won't get much done, but ... > Android has games... doesn't it? ;-)) > > Thanks for any help, > Beach Geek > > PS. Android does not detect the laptop being connected, except for getting > power. I would start by reviewing the commits for RELENG_8 between the two timeframes and try to narrow down which commit may have caused your problem. http://www.freshbsd.org/?branch=RELENG_8&project=freebsd -- | Jeremy Chadwick jdc@parodius.com | | Parodius Networking http://www.parodius.com/ | | UNIX Systems Administrator Mountain View, CA, USA | | Making life hard for others since 1977. PGP 4BD6C0CB |
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20110105063827.GA28092>