Date: Sun, 30 May 2010 14:40:07 +0800 From: Wei Yang Tan <hallucinator7@hotmail.com> To: <yanefbsd@gmail.com> Cc: freebsd-acpi@freebsd.org Subject: RE: Errors encountered when performing hibernate / suspend Message-ID: <COL115-W57F7EC9CD23D5AB4BD5FC3E8ED0@phx.gbl> In-Reply-To: <AANLkTik5xjzIMtG5PtqThyA215-DlBtvETwreEwZ87g-@mail.gmail.com> References: <COL115-W3908B9EBA073CCC13E4943E8ED0@phx.gbl>, <AANLkTimdYq5WO6TxF7sfWfuQb8f1gdS5rZc3pa-lzQ0A@mail.gmail.com>, <COL115-W17C6041F84FB3497D987AAE8ED0@phx.gbl>, <AANLkTik5xjzIMtG5PtqThyA215-DlBtvETwreEwZ87g-@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
> Date: Sat, 29 May 2010 23:34:39 -0700 > Subject: Re: Errors encountered when performing hibernate / suspend > From: yanefbsd@gmail.com > To: hallucinator7@hotmail.com > CC: freebsd-acpi@freebsd.org > > 2010/5/29 Wei Yang Tan <hallucinator7@hotmail.com>: > > > >> Date: Sat, 29 May 2010 21:46:34 -0700 > >> Subject: Re: Errors encountered when performing hibernate / suspend > >> From: yanefbsd@gmail.com > >> To: hallucinator7@hotmail.com > >> CC: freebsd-acpi@freebsd.org > >> > >> 2010/5/29 Wei Yang Tan <hallucinator7@hotmail.com>: > >> > > >> >> From: hallucinator7@hotmail.com > >> >> To: freebsd-acpi@freebsd.org > >> >> Date: Thu, 13 May 2010 21:56:20 +0800 > >> >> Subject: Errors encountered when performing hibernate / suspend > >> >> > >> >> > >> >> Hi! > >> >> > >> >> > >> >> First, thank you very much for your help. I am very new to FreeBSD, so > >> >> do bear with me for a while. Anyway, the problem is as follows: > >> >> > >> >> > >> >> Whenever I tried to hibernate, it will not be successful and I get the > >> >> following error at my ~/.xession-error file: > >> >> > >> >> > >> >> ** Message: xfsm-shutdown-helper.c:268: Using HAL to shutdown/reboot > >> >> the computer. > >> >> ** Message: xfsm-shutdown-helper.c:268: Using HAL to shutdown/reboot > >> >> the computer. > >> >> > >> >> ** (xfce4-session:1124): WARNING **: xfsm-shutdown-helper.c:234: Failed > >> >> to contact HAL: No back-end for your operating system > >> >> > >> >> > >> >> > >> >> When I tried to suspend, it will not be successful and I will get the > >> >> error message at my ~/.xession-error file: > >> >> > >> >> > >> >> ** Message: xfsm-shutdown-helper.c:268: Using HAL to shutdown/reboot > >> >> the computer. > >> >> ** Message: xfsm-shutdown-helper.c:268: Using HAL to shutdown/reboot > >> >> the computer. > >> >> thunar-volman: No property info.capabilities on device with id > >> >> /org/freedesktop/Hal/devices/usb_device_45e_83_noserial. > >> >> > >> >> > >> >> > >> >> I read the Handbook and I thought it may help by trying out the command > >> >> "acpiconf -s1". Of course it is not successful and the error message ar > >> >> ~/.xsession-error is: > >> >> > >> >> > >> >> ** Message: xfsm-shutdown-helper.c:268: Using HAL to shutdown/reboot > >> >> the computer. > >> >> ** Message: xfsm-shutdown-helper.c:268: Using HAL to shutdown/reboot > >> >> the computer. > >> >> thunar-volman: No property info.capabilities on device with id > >> >> /org/freedesktop/Hal/devices/usb_device_45e_83_noserial. > >> >> > >> >> > >> >> > >> >> > >> >> while the following is my "dmesg" output: > >> >> > >> >> > >> >> Copyright (c) 1992-2009 The FreeBSD Project. > >> >> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, > >> >> 1994 > >> >> The Regents of the University of California. All rights reserved. > >> >> FreeBSD is a registered trademark of The FreeBSD Foundation. > >> >> FreeBSD 8.0-RELEASE #0: Sat Nov 21 15:48:17 UTC 2009 > >> >> root@almeida.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC > >> >> Timecounter "i8254" frequency 1193182 Hz quality 0 > >> >> CPU: Intel Pentium III (996.77-MHz 686-class CPU) > >> >> Origin = "GenuineIntel" Id = 0x68a Stepping = 10 > >> >> > >> >> Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> > >> >> real memory = 537395200 (512 MB) > >> >> avail memory = 510431232 (486 MB) > >> >> ACPI APIC Table: <COMPAQ SOLANO > > >> >> ioapic0: Changing APIC ID to 8 > >> >> ioapic0 <Version 2.0> irqs 0-23 on motherboard > >> >> kbd1 at kbdmux0 > >> >> acpi0: <COMPAQ CPQ0005> on motherboard > >> >> acpi0: [ITHREAD] > >> >> acpi0: Power Button (fixed) > >> >> acpi0: reservation of 0, a0000 (3) failed > >> >> acpi0: reservation of 100000, 1ff00000 (3) failed > >> >> Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 > >> >> acpi_timer0: <24-bit timer at 3.579545MHz> port 0xf808-0xf80b on acpi0 > >> >> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > >> >> pci0: <ACPI PCI bus> on pcib0 > >> >> agp0: <Intel 82815 (i815 GMCH) host to PCI bridge> on hostb0 > >> >> pcib1: <PCI-PCI bridge> at device 1.0 on pci0 > >> >> pci1: <PCI bus> on pcib1 > >> >> vgapci0: <VGA-compatible display> mem > >> >> 0x41000000-0x41ffffff,0x44000000-0x45ffffff irq 18 at device 0.0 on pci1 > >> >> pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 > >> >> pci2: <ACPI PCI bus> on pcib2 > >> >> fxp0: <Intel 82801BA/CAM (ICH2/3) Pro/100 Ethernet> port 0x1000-0x103f > >> >> mem 0x40000000-0x40000fff irq 20 at device 8.0 on pci2 > >> >> miibus0: <MII bus> on fxp0 > >> >> inphy0: <i82562EM 10/100 media interface> PHY 1 on miibus0 > >> >> inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > >> >> fxp0: Ethernet address: 00:02:a5:94:97:26 > >> >> fxp0: [ITHREAD] > >> >> isab0: <PCI-ISA bridge> at device 31.0 on pci0 > >> >> isa0: <ISA bus> on isab0 > >> >> atapci0: <Intel ICH2 UDMA100 controller> port > >> >> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x2460-0x246f at device 31.1 on pci0 > >> >> ata0: <ATA channel 0> on atapci0 > >> >> ata0: [ITHREAD] > >> >> ata1: <ATA channel 1> on atapci0 > >> >> ata1: [ITHREAD] > >> >> uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port > >> >> 0x2440-0x245f irq 23 at device 31.4 on pci0 > >> >> uhci0: [ITHREAD] > >> >> uhci0: LegSup = 0x0030 > >> >> usbus0: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci0 > >> >> pcm0: <Intel ICH2 (82801BA)> port 0x2000-0x20ff,0x2400-0x243f irq 17 at > >> >> device 31.5 on pci0 > >> >> pcm0: [ITHREAD] > >> >> pcm0: <Analog Devices AD1885 AC97 Codec> > >> >> acpi_button0: <Power Button> on acpi0 > >> >> atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 > >> >> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 > >> >> atkbd0: <AT Keyboard> irq 1 on atkbdc0 > >> >> kbd0 at atkbd0 > >> >> atkbd0: [GIANT-LOCKED] > >> >> atkbd0: [ITHREAD] > >> >> ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77d irq 7 drq 3 on acpi0 > >> >> ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode > >> >> ppc0: FIFO with 16/16/13 bytes threshold > >> >> ppc0: [ITHREAD] > >> >> ppbus0: <Parallel port bus> on ppc0 > >> >> ppbus0: IEEE1284 device found /NIBBLE > >> >> ppbus0: Probing for PnP devices: > >> >> ppbus0: <Canon S400SP/1.06> PRINTER BJL,BJRaster3,BSCC,TXT01,BJScan2 > >> >> plip0: <PLIP network interface> on ppbus0 > >> >> plip0: [ITHREAD] > >> >> lpt0: <Printer> on ppbus0 > >> >> lpt0: [ITHREAD] > >> >> lpt0: Interrupt-driven port > >> >> ppi0: <Parallel I/O> on ppbus0 > >> >> uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 > >> >> uart0: [FILTER] > >> >> uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 > >> >> uart1: [FILTER] > >> >> fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on > >> >> acpi0 > >> >> fdc0: [FILTER] > >> >> fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > >> >> cpu0: <ACPI CPU> on acpi0 > >> >> acpi_throttle0: <ACPI CPU Throttling> on cpu0 > >> >> pmtimer0 on isa0 > >> >> orm0: <ISA Option ROM> at iomem 0xe0000-0xeffff pnpid ORM0000 on isa0 > >> >> sc0: <System console> at flags 0x100 on isa0 > >> >> sc0: VGA <16 virtual consoles, flags=0x300> > >> >> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on > >> >> isa0 > >> >> Timecounter "TSC" frequency 996770364 Hz quality 800 > >> >> Timecounters tick every 1.000 msec > >> >> usbus0: 12Mbps Full Speed USB v1.0 > >> >> ad0: 39205MB <Maxtor 6E040L0 NAR61HA0> at ata0-master UDMA100 > >> >> ugen0.1: <Intel> at usbus0 > >> >> uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on > >> >> usbus0 > >> >> acd0: CDROM <LTN486S/YQS8> at ata1-master PIO4 > >> >> pcm0: measured ac97 link rate at 55945 Hz > >> >> uhub0: 2 ports with 2 removable, self powered > >> >> Root mount waiting for: usbus0 > >> >> ugen0.2: <Microsoft> at usbus0 > >> >> ums0: <Microsoft Basic Optical Mouse, class 0/0, rev 1.10/0.00, addr 2> > >> >> on usbus0 > >> >> ums0: 3 buttons and [XYZ] coordinates ID=0 > >> >> Trying to mount root from ufs:/dev/ad0s1a > >> >> acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 > >> >> acd0: FAILURE - unknown CMD (0x03) ILLEGAL REQUEST asc=0x20 ascq=0x00 > >> >> acd0: FAILURE - READ_DISK_INFO ILLEGAL REQUEST asc=0x20 ascq=0x00 > >> >> acd0: FAILURE - READ_DISK_INFO ILLEGAL REQUEST asc=0x20 ascq=0x00 > >> >> acpi0: AcpiEnterSleepState failed - AE_BAD_ADDRESS > >> >> wakeup from sleeping state (slept 00:00:03) > >> >> ugen0.2: <Microsoft> at usbus0 (disconnected) > >> >> ums0: at uhub0, port 2, addr 2 (disconnected) > >> >> ugen0.2: <Microsoft> at usbus0 > >> >> ums0: <Microsoft Basic Optical Mouse, class 0/0, rev 1.10/0.00, addr 2> > >> >> on usbus0 > >> >> ums0: 3 buttons and [XYZ] coordinates ID=0 > >> >> > >> >> > >> >> > >> >> > >> >> > >> >> The output of "sysctl hw.acpi": > >> >> > >> >> > >> >> hw.acpi.supported_sleep_state: S1 S3 S4 S5 > >> >> hw.acpi.power_button_state: S5 > >> >> hw.acpi.sleep_button_state: S1 > >> >> hw.acpi.lid_switch_state: NONE > >> >> hw.acpi.standby_state: S1 > >> >> hw.acpi.suspend_state: S3 > >> >> hw.acpi.sleep_delay: 1 > >> >> hw.acpi.s4bios: 0 > >> >> hw.acpi.verbose: 0 > >> >> hw.acpi.disable_on_reboot: 0 > >> >> hw.acpi.handle_reboot: 0 > >> >> hw.acpi.reset_video: 0 > >> >> hw.acpi.cpu.cx_lowest: C1 > >> >> > >> >> > >> >> > >> >> > >> >> > >> >> I am using FreeBSD 8.0 and Xfce desktop environment (Thunar is the file > >> >> manager). For hardware, I am using Pentium III; Compaq Deskpro EN. > >> >> > >> >> I am not sure if all these information are sufficient; do let me know > >> >> if you need more information. Once again, thank you very much for your help. > >> > > >> > Hi! Erm... just wondering, is my debug info sufficient or is the problem > >> > not an ACPI one? Also, may I know what can I do to help in solving the > >> > problem? > >> > >> Does ACPI even work on your laptop (try reading the handbook chapter: > >> http://www.freebsd.org/doc/handbook/acpi-debug.html )? > > > > > > Hi! > > > > I have managed to get hold of Linux Mint 8 LiveCD and test the Sleep feature > > and it works. It is using ACPI, since only ACPI is displayed on dmesg > > instead of APM. So I believe ACPI should work on my Compaq Deskpro desktop, > > am I right? > > Yeah.. that's great that S3 works on your hardware, but you aren't > helping determine whether or not things function with FreeBSD using > FreeBSD standard tools instead of hal (which is primarily targeted and > ported to Linux). > Thanks, > -Garrett I am sorry if I am not helping in anyway, as I am kind of new to all these technical stuff (a.k.a a newbie). Perhaps you can elaborate on the steps to using FreeBSD standard tools for testing? I will very glad to provide the relevant info. Once again, thanks for your time :) WY _________________________________________________________________ Your E-mail and More On-the-Go. Get Windows Live Hotmail Free. https://signup.live.com/signup.aspx?id=60969
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?COL115-W57F7EC9CD23D5AB4BD5FC3E8ED0>