Date: Tue, 12 Oct 2010 14:51:07 +0300 From: Ivan Klymenko <fidaj@ukr.net> To: Garrett Cooper <gcooper@FreeBSD.org> Cc: freebsd-current@freebsd.org, Andriy Gapon <avg@icyb.net.ua> Subject: Re: system hangs after logging into gdm Message-ID: <20101012145107.2b23914f@ukr.net> In-Reply-To: <AANLkTimSzwp5h-u0JQL_aCnti3VFHOjibJ82qS-KWset@mail.gmail.com> References: <20101011105904.70dd7e7f@ukr.net> <4CB2D317.9010004@icyb.net.ua> <AANLkTimj_8wGieDMjimRoRbrj8=xwkhHtVOfECVyN3FJ@mail.gmail.com> <20101012113542.5eaf5321@ukr.net> <4CB42179.10302@icyb.net.ua> <20101012120002.75ed1f2d@ukr.net> <4CB42497.4080105@icyb.net.ua> <AANLkTimSzwp5h-u0JQL_aCnti3VFHOjibJ82qS-KWset@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
=D0=92 Tue, 12 Oct 2010 02:07:01 -0700 Garrett Cooper <gcooper@FreeBSD.org> =D0=BF=D0=B8=D1=88=D0=B5=D1=82: > On Tue, Oct 12, 2010 at 2:04 AM, Andriy Gapon <avg@icyb.net.ua> wrote: > > on 12/10/2010 12:00 Ivan Klymenko said the following: > >> =D0=92 Tue, 12 Oct 2010 11:51:05 +0300 > >> Andriy Gapon <avg@icyb.net.ua> =D0=BF=D0=B8=D1=88=D0=B5=D1=82: > >> > >>> on 12/10/2010 11:35 Ivan Klymenko said the following: > >>>> --i choose a user, enter a password and press "Enter" > >>> > >>> have you switched to text console after the above and before the > >>> next? > >> > >> After the system hangs - no > > > > I specifically asked if you switched to text console right after > > pressing Enter in the above step. =C2=A0Sorry if that was not clear. > > > >> after a reboot - yes - I went to the console and rebuilt world and > >> kernel version r231507 again ... > >> > >>> > >>>> --takes a few seconds and my system hangs > >>>> --I press CTRL + ALT + ESC, but nothing happens > >>> > >>> You might want to add DEBUG_VFS_LOCKS. > >>> > >> > >> Yes, I can, but this whole procedure takes me many hours ... > >> I have FreeBSD - the only system on the PC and I need it in > >> working order - I'm working on it > >> > >> Surely no one will be able to repeat my steps, that would verify > >> this especially since I've written previously that the cause may > >> be in the vfs ... > > > > Not sure what your point is. > > So far you seem to be the only one who has the problem (or has > > reported it, at least). >=20 > Could you try disabling some of your modules (fuse, nvidia, etc) > in a stepwise manner? fuse is of particular interest for me to see > whether or not it resolves the problem. > Thanks, > -Garrett --I have updated the source code to r213666 --rebuilt and reinstall: ONLY kernel GENERIC + options DEBUG_VFS_LO= CKS --i NOT reinstall nvidia driver with my patch... --i removed fusefs_enable=3D"YES" in /etc/rc.conf <<<<<!!!!!!!!!!!! fusefs-kmod-0.3.9.p1.20080208_6 system booted fine and I successfully logged on to gdm! :) cause system hangs at the entrance to gdm was a module of the ports of fuse= .ko Thank you very much!
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20101012145107.2b23914f>