Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 16 Jul 2010 17:53:46 +0800
From:      frank cheong <kwcheong@gmail.com>
To:        Scott Long <scottl@samsco.org>
Cc:        "freebsd-scsi@freebsd.org" <freebsd-scsi@freebsd.org>, Mike Hill <mike.hill@kitesystems.com>, Sean Bruno <seanbru@yahoo-inc.com>, Folkert Saathoff <folkert.saathoff@kitesystems.com>
Subject:   Re: /dev/ch0 not recognized
Message-ID:  <AANLkTilfsd8NUiPpuNcYYZJXu-AtWki0dozTlgGUM1kG@mail.gmail.com>
In-Reply-To: <AANLkTimTaG4xvXiItxsB2_pafaO80VWuRpcN94FLdyNJ@mail.gmail.com>
References:  <AANLkTik3mfTCcHwgYC4R5ANgf0ydBFkpUyjj90n0-uNP@mail.gmail.com>  <6A0E4367-98BB-4C24-B01A-63A3E533D88C@kitesystems.com> <1278433685.2506.9.camel@localhost.localdomain>  <AANLkTimjNuezI-yhDzpjnpVoUfp5tI9CwIWrWFN6_pSD@mail.gmail.com>  <6EC599F1-3713-4497-9372-4032078890EF@samsco.org> <AANLkTimTaG4xvXiItxsB2_pafaO80VWuRpcN94FLdyNJ@mail.gmail.com>

next in thread | previous in thread | raw e-mail | index | archive | help
Eventually, I have replaced the P212 with my spare Dell 6/E Integrated SAS
controller. Everything works just fine.

Just would like to share some information for others who are experiencing
the same problem.

I have even tried using CentOS 5.5 with latest driver from HP. But it is
really strange that when I use mtx on OS level it works without problem,
while whenever I try to communicate with the tape loader using bacula, it
didn't work at all. The post effect of using bacula to access the tape
library is really serious, I will have to reboot the server before I can use
mtx again. In addition, I have tried the mtx-changer which is provided by
Bacula and it also didn't work.

Now I am testing my loader with btape provided by bacula which seems to be
working fine initially.

Frank

On Fri, Jul 9, 2010 at 10:04 AM, frank cheong <kwcheong@gmail.com> wrote:

> Dear Scott,
>
> I see your point. Maybe the proprietary driver provided by HP for Window
> and Linux is using some other undocumented way in order to grab those hidden
> device, who knows?
>
> Anyway, I think what you suspect about the hw.ciss.expose_hidden_physical
> is really highly likely coz I have tried to probe the device by using the
> devfs rescan and input the lun address directly, whereby OS simply create
> another /dev/sa device driver which is also a tape drive device.
>
> For the function ciss_filter_physical(), I think I may not have the time
> and experience in helping it out by writing a program. Let me know if you
> have any working command/utility or scripts so that it help print out the
> entire inventory. Coz I do want to help the community to grow so as to
> possibly work around this problem. With that more people can adopt FreeBSD
> more easily. The server, which loaded up with Centos Now, is going to be
> deployed as production environment really soon while I still have some time
> to play around with it. Just let me know if anything useful that you would
> like me to help to collect.
>
> Rgds,
> Frank
>
>
> On Thu, Jul 8, 2010 at 10:00 PM, Scott Long <scottl@samsco.org> wrote:
>
>> Someone asked me about this recently, and I looked into it a little bit
>> (sorry, can't find the conversation in my archives, apologies in advance if
>> it's someone in this discussion).
>>
>> With that note aside, you have to understand how this system works.  It
>> doesn't follow the traditional rules of SCSI when it comes to device
>> discovery; instead the CISS firmware controls what devices are allowed to be
>> seen by the OS.  The OS cannot simply probe each possible bus/target/lun
>> address on the controller.  In fact, there's no such thing as bus/target/lun
>> addressing in CISS.  The CISS firmware creates an inventory of device
>> handles and passes that to the driver, and the driver then creates synthetic
>> bus/target/lun numbers to satisfy the SCSI layer in the OS.  If a device
>> isn't in the inventory provided by the firmware, then the driver and OS
>> simply won't see it, period.  There's no way for the driver or OS to
>> discover a device that's not part of the firmware inventory.
>>
>> There are two special exceptions.  The first is that the firmware does try
>> to hide some devices.  Typically these are disk devices, and are hidden so
>> that you can't get screw around with a disk that's part of an array.  They
>> are part of the inventory, but are flagged for the driver to ignore.  If you
>> set the following tunable in /boot/loader.conf, you'll override the "ignore"
>> setting:
>>
>> hw.ciss.expose_hidden_physical=1
>>
>> Second, when the hidden devices are exposed, the driver will filter the
>> INQUIRY info and change T_DIRECT devices into T_NODEVICE devices.  This has
>> the effect of allowing disk drives to be seen only as passthrough devices,
>> providing an extra safety belt to disks that are part of arrays.
>>
>> In my previous investigation, it looked like the tape device is showing up
>> in the inventory, but not the changer device.  That's pretty much a dead end
>> for this problem, short of finding a hidden BIOS switch or a new firmware
>> image or some other magic from HP.  You can try turning on the expose
>> tunable to see if it's actually part of the inventory, but hidden.  If that
>> doesn't work, you can try looking at ciss_filter_physical() in the driver
>> and have it print out the entire inventory as it iterates through it; that
>> might identify something that the driver doesn't know how to handle.
>>
>> Scott
>>
>>
>>
>> On Jul 6, 2010, at 10:26 PM, frank cheong wrote:
>>
>> > dmesg here
>> >
>> > freeBSD# dmesg
>> > Copyright (c) 1992-2009 The FreeBSD Project.
>> > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>> >        The Regents of the University of California. All rights reserved.
>> > FreeBSD is a registered trademark of The FreeBSD Foundation.
>> > FreeBSD 8.0-RELEASE #0: Sat Nov 21 15:48:17 UTC 2009
>> >    root@almeida.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
>> > Preloaded elf kernel "/boot/kernel/kernel" at 0xc0f6f000.
>> > Timecounter "i8254" frequency 1193182 Hz quality 0
>> > Calibrating TSC clock ... TSC clock: 2266761792 Hz
>> > CPU: Intel(R) Xeon(R) CPU           E5520  @ 2.27GHz (2266.76-MHz
>> 686-class
>> > CPU)
>> >  Origin = "GenuineIntel"  Id = 0x106a5  Stepping = 5
>> >
>> >
>> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>> >
>> >
>> Features2=0x9ce3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT>
>> >  AMD Features=0x28100000<NX,RDTSCP,LM>
>> >  AMD Features2=0x1<LAHF>
>> >  TSC: P-state invariant
>> >
>> > Data TLB: 4 KB pages, 4-way set associative, 64 entries
>> > 1st-level data cache: 32 KB, 8-way set associative, 64 byte line size
>> > L2 cache: 256 kbytes, 8-way associative, 64 bytes/line
>> > real memory  = 4294967296 (4096 MB)
>> > Physical memory chunk(s):
>> > 0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages)
>> > 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
>> > 0x0000000001026000 - 0x00000000bc126fff, 3138392064 bytes (766209 pages)
>> > avail memory = 3137052672 (2991 MB)
>> > Table 'FACP' at 0xbf770290
>> > Table 'APIC' at 0xbf770390
>> > MADT: Found table at 0xbf770390
>> > MP Configuration Table version 1.4 found at 0xc00fd3e0
>> > APIC: Using the MADT enumerator.
>> > MADT: Found CPU APIC ID 16 ACPI ID 1: enabled
>> > SMP: Added CPU 16 (AP)
>> > MADT: Found CPU APIC ID 18 ACPI ID 2: enabled
>> > SMP: Added CPU 18 (AP)
>> > MADT: Found CPU APIC ID 20 ACPI ID 3: enabled
>> > SMP: Added CPU 20 (AP)
>> > MADT: Found CPU APIC ID 22 ACPI ID 4: enabled
>> > SMP: Added CPU 22 (AP)
>> > MADT: Found CPU APIC ID 17 ACPI ID 5: enabled
>> > SMP: Added CPU 17 (AP)
>> > MADT: Found CPU APIC ID 19 ACPI ID 6: enabled
>> > SMP: Added CPU 19 (AP)
>> > MADT: Found CPU APIC ID 21 ACPI ID 7: enabled
>> > SMP: Added CPU 21 (AP)
>> > MADT: Found CPU APIC ID 23 ACPI ID 8: enabled
>> > SMP: Added CPU 23 (AP)
>> > MADT: Found CPU APIC ID 136 ACPI ID 9: disabled
>> > MADT: Found CPU APIC ID 137 ACPI ID 10: disabled
>> > MADT: Found CPU APIC ID 138 ACPI ID 11: disabled
>> > MADT: Found CPU APIC ID 139 ACPI ID 12: disabled
>> > MADT: Found CPU APIC ID 140 ACPI ID 13: disabled
>> > MADT: Found CPU APIC ID 141 ACPI ID 14: disabled
>> > MADT: Found CPU APIC ID 142 ACPI ID 15: disabled
>> > MADT: Found CPU APIC ID 143 ACPI ID 16: disabled
>> > MADT: Found CPU APIC ID 144 ACPI ID 17: disabled
>> > MADT: Found CPU APIC ID 145 ACPI ID 18: disabled
>> > MADT: Found CPU APIC ID 146 ACPI ID 19: disabled
>> > MADT: Found CPU APIC ID 147 ACPI ID 20: disabled
>> > MADT: Found CPU APIC ID 148 ACPI ID 21: disabled
>> > MADT: Found CPU APIC ID 149 ACPI ID 22: disabled
>> > MADT: Found CPU APIC ID 150 ACPI ID 23: disabled
>> > MADT: Found CPU APIC ID 151 ACPI ID 24: disabled
>> > ACPI APIC Table: <HP     ProLiant>
>> > INTR: Adding local APIC 17 as a target
>> > INTR: Adding local APIC 18 as a target
>> > INTR: Adding local APIC 19 as a target
>> > INTR: Adding local APIC 20 as a target
>> > INTR: Adding local APIC 21 as a target
>> > INTR: Adding local APIC 22 as a target
>> > INTR: Adding local APIC 23 as a target
>> > FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
>> > FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 SMT threads
>> > cpu0 (BSP): APIC ID: 16
>> > cpu1 (AP): APIC ID: 17
>> > cpu2 (AP): APIC ID: 18
>> > cpu3 (AP): APIC ID: 19
>> > cpu4 (AP): APIC ID: 20
>> > cpu5 (AP): APIC ID: 21
>> > cpu6 (AP): APIC ID: 22
>> > cpu7 (AP): APIC ID: 23
>> > APIC: CPU 0 has ACPI ID 1
>> > APIC: CPU 1 has ACPI ID 5
>> > APIC: CPU 2 has ACPI ID 2
>> > APIC: CPU 3 has ACPI ID 6
>> > APIC: CPU 4 has ACPI ID 3
>> > APIC: CPU 5 has ACPI ID 7
>> > APIC: CPU 6 has ACPI ID 4
>> > APIC: CPU 7 has ACPI ID 8
>> > bios32: Found BIOS32 Service Directory header at 0xc00f0000
>> > bios32: Entry = 0xf0010 (c00f0010)  Rev = 0  Len = 1
>> > pcibios: PCI BIOS entry at 0xf0000+0x31
>> > pnpbios: Found PnP BIOS data at 0xc00f3dd0
>> > pnpbios: Entry = f0000:523a  Rev = 1.0
>> > Other BIOS signatures found:
>> > ULE: setup cpu 0
>> > ULE: setup cpu 1
>> > ULE: setup cpu 2
>> > ULE: setup cpu 3
>> > ULE: setup cpu 4
>> > ULE: setup cpu 5
>> > ULE: setup cpu 6
>> > ULE: setup cpu 7
>> > ACPI: RSDP 0xfa160 00024 (v2 HP    )
>> > ACPI: XSDT 0xbf770100 0009C (v1 HP     ProLiant 20100301 MSFT 00000097)
>> > ACPI: FACP 0xbf770290 000F4 (v4 HP     ProLiant 20100301 MSFT 00000097)
>> > ACPI: DSDT 0xbf770740 05EEB (v2 HP     ProLiant 00000200 INTL 20051117)
>> > ACPI: FACS 0xbf77e000 00040
>> > ACPI: APIC 0xbf770390 0011E (v2 HP     ProLiant 20100301 MSFT 00000097)
>> > ACPI: SPCR 0xbf7704b0 00050 (v1 HP     ProLiant 20100301 MSFT 00000097)
>> > ACPI: MCFG 0xbf770500 0003C (v1 HP     ProLiant 20100301 MSFT 00000097)
>> > ACPI: SPMI 0xbf770540 00041 (v5 HP     ProLiant 20100301 MSFT 00000097)
>> > ACPI: SLIC 0xbf770590 00176 (v1 HP     SLIC1515 20100301 MSFT 00000097)
>> > ACPI: BOOT 0xbf770710 00028 (v1 HP     ProLiant 20100301 MSFT 00000097)
>> > ACPI: OEMB 0xbf77e040 0007A (v1 HP     ProLiant 20100301 MSFT 00000097)
>> > ACPI: HPET 0xbf77a740 00038 (v1 HP     ProLiant 20100301 MSFT 00000097)
>> > ACPI: DMAR 0xbf77e0c0 000F8 (v1    AMI  OEMDMAR 00000001 MSFT 00000097)
>> > ACPI: SSDT 0xbf77fbf0 00363 (v1 HP     ProLiant 00000012 INTL 20051117)
>> > ACPI: EINJ 0xbf77a780 00130 (v1     HP ProLiant 20100301 MSFT 00000097)
>> > ACPI: BERT 0xbf77a910 00030 (v1     HP ProLiant 20100301 MSFT 00000097)
>> > ACPI: ERST 0xbf77a940 001B0 (v1     HP ProLiant 20100301 MSFT 00000097)
>> > ACPI: HEST 0xbf77aaf0 000A8 (v1     HP ProLiant 20100301 MSFT 00000097)
>> > MADT: Found IO APIC ID 8, Interrupt 0 at 0xfec00000
>> > ioapic0: Changing APIC ID to 8
>> > ioapic0: Routing external 8259A's -> intpin 0
>> > MADT: Found IO APIC ID 9, Interrupt 24 at 0xfec8a000
>> > ioapic1: Changing APIC ID to 9
>> > MADT: Interrupt override: source 0, irq 2
>> > ioapic0: Routing IRQ 0 -> intpin 2
>> > MADT: Interrupt override: source 9, irq 9
>> > ioapic0: intpin 9 trigger: level
>> > lapic: Routing NMI -> LINT1
>> > lapic: LINT1 trigger: edge
>> > lapic: LINT1 polarity: high
>> > ioapic0 <Version 2.0> irqs 0-23 on motherboard
>> > ioapic1 <Version 2.0> irqs 24-47 on motherboard
>> > cpu0 BSP:
>> >     ID: 0x10000000   VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
>> >  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
>> >  timer: 0x000100ef therm: 0x00010000 err: 0x0001000f pcm: 0x00010400
>> > wlan: <802.11 Link Layer>
>> > kbd: new array size 4
>> > kbd1 at kbdmux0
>> > mem: <memory>
>> > Pentium Pro MTRR support enabled
>> > null: <null device, zero device>
>> > random: <entropy source, Software, Yarrow>
>> > nfslock: pseudo-device
>> > io: <I/O>
>> > hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
>> > npx0: INT 16 interface
>> > acpi0: <HP ProLiant> on motherboard
>> > PCIe: Memory Mapped configuration base @ 0xe0000000
>> > pcibios: BIOS version 3.00
>> > ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 16 vector 48
>> > acpi0: [MPSAFE]
>> > acpi0: [ITHREAD]
>> > acpi0: Power Button (fixed)
>> > acpi0: wakeup code va 0xc62a6000 pa 0x1000
>> > AcpiOsDerivePciId: \\_SB_.PCI0.SBRG.IELK.RXA0 -> bus 0 dev 0 func 0
>> > AcpiOsDerivePciId: \\_SB_.PCI0.SBRG.PIX0 -> bus 0 dev 31 func 0
>> > acpi0: reservation of 0, a0000 (3) failed
>> > acpi0: reservation of 100000, bff00000 (3) failed
>> > ACPI timer: 1/1 1/2 1/1 1/2 1/0 1/2 1/2 1/1 1/1 1/1 -> 10
>> > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
>> > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
>> > pci_link0:        Index  IRQ  Rtd  Ref  IRQs
>> >  Initial Probe       0   10   N     0  3 4 6 7 10 11 12 14 15
>> >  Validation          0   10   N     0  3 4 6 7 10 11 12 14 15
>> >  After Disable       0  255   N     0  3 4 6 7 10 11 12 14 15
>> > pci_link1:        Index  IRQ  Rtd  Ref  IRQs
>> >  Initial Probe       0    5   N     0  5
>> >  Validation          0    5   N     0  5
>> >  After Disable       0  255   N     0  5
>> > pci_link2:        Index  IRQ  Rtd  Ref  IRQs
>> >  Initial Probe       0   15   N     0  3 4 6 7 10 11 12 14 15
>> >  Validation          0   15   N     0  3 4 6 7 10 11 12 14 15
>> >  After Disable       0  255   N     0  3 4 6 7 10 11 12 14 15
>> > pci_link3:        Index  IRQ  Rtd  Ref  IRQs
>> >  Initial Probe       0   11   N     0  3 4 6 7 10 11 12 14 15
>> >  Validation          0   11   N     0  3 4 6 7 10 11 12 14 15
>> >  After Disable       0  255   N     0  3 4 6 7 10 11 12 14 15
>> > pci_link4:        Index  IRQ  Rtd  Ref  IRQs
>> >  Initial Probe       0  255   N     0  3 4 6 7 10 11 12 14 15
>> >  Validation          0  255   N     0  3 4 6 7 10 11 12 14 15
>> >  After Disable       0  255   N     0  3 4 6 7 10 11 12 14 15
>> > pci_link5:        Index  IRQ  Rtd  Ref  IRQs
>> >  Initial Probe       0  255   N     0  3 4 6 7 10 11 12 14 15
>> >  Validation          0  255   N     0  3 4 6 7 10 11 12 14 15
>> >  After Disable       0  255   N     0  3 4 6 7 10 11 12 14 15
>> > pci_link6:        Index  IRQ  Rtd  Ref  IRQs
>> >  Initial Probe       0  255   N     0  3 4 6 7 10 11 12 14 15
>> >  Validation          0  255   N     0  3 4 6 7 10 11 12 14 15
>> >  After Disable       0  255   N     0  3 4 6 7 10 11 12 14 15
>> > pci_link7:        Index  IRQ  Rtd  Ref  IRQs
>> >  Initial Probe       0   14   N     0  3 4 6 7 10 11 12 14 15
>> >  Validation          0   14   N     0  3 4 6 7 10 11 12 14 15
>> >  After Disable       0  255   N     0  3 4 6 7 10 11 12 14 15
>> > acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
>> > acpi0
>> > acpi_hpet0: vend: 0x8086 rev: 0x1 num: 3 hz: 14318180 opts: legacy_route
>> > 64-bit
>> > Timecounter "HPET" frequency 14318180 Hz quality 900
>> > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
>> > pci0: <ACPI PCI bus> on pcib0
>> > pci0: domain=0, physical bus=0
>> > found-> vendor=0x8086, dev=0x3406, revid=0x13
>> >        domain=0, bus=0, slot=0, func=0
>> >        class=06-00-00, hdrtype=0x00, mfdev=0
>> >        cmdreg=0x0140, statreg=0x0810, cachelnsz=0 (dwords)
>> >        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>> >        powerspec 3  supports D0 D3  current D0
>> >        MSI supports 2 messages, vector masks
>> > found-> vendor=0x8086, dev=0x3408, revid=0x13
>> >        domain=0, bus=0, slot=1, func=0
>> >        class=06-04-00, hdrtype=0x01, mfdev=0
>> >        cmdreg=0x0147, statreg=0x0010, cachelnsz=64 (dwords)
>> >        lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
>> >        powerspec 3  supports D0 D3  current D0
>> >        MSI supports 2 messages, vector masks
>> > found-> vendor=0x8086, dev=0x340a, revid=0x13
>> >        domain=0, bus=0, slot=3, func=0
>> >        class=06-04-00, hdrtype=0x01, mfdev=0
>> >        cmdreg=0x0147, statreg=0x0010, cachelnsz=64 (dwords)
>> >        lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
>> >        powerspec 3  supports D0 D3  current D0
>> >        MSI supports 2 messages, vector masks
>> > found-> vendor=0x8086, dev=0x340e, revid=0x13
>> >        domain=0, bus=0, slot=7, func=0
>> >        class=06-04-00, hdrtype=0x01, mfdev=0
>> >        cmdreg=0x0144, statreg=0x0010, cachelnsz=64 (dwords)
>> >        lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
>> >        powerspec 3  supports D0 D3  current D0
>> >        MSI supports 2 messages, vector masks
>> > found-> vendor=0x8086, dev=0x3410, revid=0x13
>> >        domain=0, bus=0, slot=9, func=0
>> >        class=06-04-00, hdrtype=0x01, mfdev=0
>> >        cmdreg=0x0147, statreg=0x0010, cachelnsz=64 (dwords)
>> >        lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
>> >        powerspec 3  supports D0 D3  current D0
>> >        MSI supports 2 messages, vector masks
>> > found-> vendor=0x8086, dev=0x342e, revid=0x13
>> >        domain=0, bus=0, slot=20, func=0
>> >        class=08-00-00, hdrtype=0x00, mfdev=1
>> >        cmdreg=0x0000, statreg=0x0010, cachelnsz=64 (dwords)
>> >        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>> > found-> vendor=0x8086, dev=0x3422, revid=0x13
>> >        domain=0, bus=0, slot=20, func=1
>> >        class=08-00-00, hdrtype=0x00, mfdev=1
>> >        cmdreg=0x0000, statreg=0x0010, cachelnsz=64 (dwords)
>> >        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>> > found-> vendor=0x8086, dev=0x3423, revid=0x13
>> >        domain=0, bus=0, slot=20, func=2
>> >        class=08-00-00, hdrtype=0x00, mfdev=1
>> >        cmdreg=0x0000, statreg=0x0010, cachelnsz=64 (dwords)
>> >        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>> > found-> vendor=0x8086, dev=0x3a37, revid=0x00
>> >        domain=0, bus=0, slot=26, func=0
>> >        class=0c-03-00, hdrtype=0x00, mfdev=1
>> >        cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
>> >        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>> >        intpin=a, irq=10
>> >        map[20]: type I/O Port, range 32, base 0xa800, size  5, enabled
>> > pcib0: matched entry for 0.26.INTA
>> > pcib0: slot 26 INTA hardwired to IRQ 16
>> > found-> vendor=0x8086, dev=0x3a3c, revid=0x00
>> >        domain=0, bus=0, slot=26, func=7
>> >        class=0c-03-20, hdrtype=0x00, mfdev=0
>> >        cmdreg=0x0046, statreg=0x0290, cachelnsz=0 (dwords)
>> >        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>> >        intpin=c, irq=15
>> >        powerspec 2  supports D0 D3  current D0
>> >        map[10]: type Memory, range 32, base 0xfa7f8000, size 10, enabled
>> > pcib0: matched entry for 0.26.INTC
>> > pcib0: slot 26 INTC hardwired to IRQ 18
>> > found-> vendor=0x8086, dev=0x3a40, revid=0x00
>> >        domain=0, bus=0, slot=28, func=0
>> >        class=06-04-00, hdrtype=0x01, mfdev=1
>> >        cmdreg=0x0146, statreg=0x0010, cachelnsz=64 (dwords)
>> >        lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
>> >        intpin=a, irq=10
>> >        powerspec 2  supports D0 D3  current D0
>> >        MSI supports 1 message
>> > pcib0: matched entry for 0.28.INTA
>> > pcib0: slot 28 INTA hardwired to IRQ 16
>> > found-> vendor=0x8086, dev=0x3a48, revid=0x00
>> >        domain=0, bus=0, slot=28, func=4
>> >        class=06-04-00, hdrtype=0x01, mfdev=1
>> >        cmdreg=0x0007, statreg=0x0810, cachelnsz=64 (dwords)
>> >        lattimer=0x00 (0 ns), mingnt=0x1a (6500 ns), maxlat=0x00 (0 ns)
>> >        intpin=a, irq=10
>> >        powerspec 2  supports D0 D3  current D0
>> >        MSI supports 1 message
>> > pcib0: matched entry for 0.28.INTA
>> > pcib0: slot 28 INTA hardwired to IRQ 16
>> > found-> vendor=0x8086, dev=0x3a34, revid=0x00
>> >        domain=0, bus=0, slot=29, func=0
>> >        class=0c-03-00, hdrtype=0x00, mfdev=1
>> >        cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
>> >        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>> >        intpin=a, irq=14
>> >        map[20]: type I/O Port, range 32, base 0xa880, size  5, enabled
>> > pcib0: matched entry for 0.29.INTA
>> > pcib0: slot 29 INTA hardwired to IRQ 23
>> > found-> vendor=0x8086, dev=0x3a35, revid=0x00
>> >        domain=0, bus=0, slot=29, func=1
>> >        class=0c-03-00, hdrtype=0x00, mfdev=0
>> >        cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
>> >        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>> >        intpin=b, irq=11
>> >        map[20]: type I/O Port, range 32, base 0xac00, size  5, enabled
>> > pcib0: matched entry for 0.29.INTB
>> > pcib0: slot 29 INTB hardwired to IRQ 19
>> > found-> vendor=0x8086, dev=0x3a36, revid=0x00
>> >        domain=0, bus=0, slot=29, func=2
>> >        class=0c-03-00, hdrtype=0x00, mfdev=0
>> >        cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
>> >        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>> >        intpin=c, irq=15
>> >        map[20]: type I/O Port, range 32, base 0xb000, size  5, enabled
>> > pcib0: matched entry for 0.29.INTC
>> > pcib0: slot 29 INTC hardwired to IRQ 18
>> > found-> vendor=0x8086, dev=0x3a3a, revid=0x00
>> >        domain=0, bus=0, slot=29, func=7
>> >        class=0c-03-20, hdrtype=0x00, mfdev=0
>> >        cmdreg=0x0046, statreg=0x0290, cachelnsz=0 (dwords)
>> >        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>> >        intpin=a, irq=14
>> >        powerspec 2  supports D0 D3  current D0
>> >        map[10]: type Memory, range 32, base 0xfa7fa000, size 10, enabled
>> > pcib0: matched entry for 0.29.INTA
>> > pcib0: slot 29 INTA hardwired to IRQ 23
>> > found-> vendor=0x8086, dev=0x244e, revid=0x90
>> >        domain=0, bus=0, slot=30, func=0
>> >        class=06-04-01, hdrtype=0x01, mfdev=0
>> >        cmdreg=0x0144, statreg=0x0010, cachelnsz=0 (dwords)
>> >        lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
>> > found-> vendor=0x8086, dev=0x3a16, revid=0x00
>> >        domain=0, bus=0, slot=31, func=0
>> >        class=06-01-00, hdrtype=0x00, mfdev=1
>> >        cmdreg=0x0147, statreg=0x0210, cachelnsz=0 (dwords)
>> >        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>> > found-> vendor=0x8086, dev=0x3a22, revid=0x00
>> >        domain=0, bus=0, slot=31, func=2
>> >        class=01-06-01, hdrtype=0x00, mfdev=0
>> >        cmdreg=0x0047, statreg=0x02b0, cachelnsz=0 (dwords)
>> >        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>> >        intpin=b, irq=11
>> >        powerspec 3  supports D0 D3  current D0
>> >        MSI supports 16 messages
>> >        map[10]: type I/O Port, range 32, base 0xb880, size  3, enabled
>> >        map[14]: type I/O Port, range 32, base 0xb800, size  2, enabled
>> >        map[18]: type I/O Port, range 32, base 0xb480, size  3, enabled
>> >        map[1c]: type I/O Port, range 32, base 0xb400, size  2, enabled
>> >        map[20]: type I/O Port, range 32, base 0xb080, size  5, enabled
>> >        map[24]: type Memory, range 32, base 0xfa7fc000, size 11, enabled
>> > pcib0: matched entry for 0.31.INTB
>> > pcib0: slot 31 INTB hardwired to IRQ 19
>> > pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
>> > pcib1:   domain            0
>> > pcib1:   secondary bus     7
>> > pcib1:   subordinate bus   7
>> > pcib1:   I/O decode        0xe000-0xefff
>> > pcib1:   memory decode     0xfbe00000-0xfbefffff
>> > pcib1:   no prefetched decode
>> > pci7: <ACPI PCI bus> on pcib1
>> > pci7: domain=0, physical bus=7
>> > found-> vendor=0x8086, dev=0x10c9, revid=0x01
>> >        domain=0, bus=7, slot=0, func=0
>> >        class=02-00-00, hdrtype=0x00, mfdev=1
>> >        cmdreg=0x0147, statreg=0x0010, cachelnsz=64 (dwords)
>> >        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>> >        intpin=a, irq=10
>> >        powerspec 3  supports D0 D3  current D0
>> >        MSI supports 1 message, 64 bit, vector masks
>> >        MSI-X supports 10 messages in map 0x1c
>> >        map[10]: type Memory, range 32, base 0xfbe60000, size 17, enabled
>> > pcib1: requested memory range 0xfbe60000-0xfbe7ffff: good
>> >        map[14]: type Memory, range 32, base 0xfbe40000, size 17, enabled
>> > pcib1: requested memory range 0xfbe40000-0xfbe5ffff: good
>> >        map[18]: type I/O Port, range 32, base 0xe880, size  5, enabled
>> > pcib1: requested I/O range 0xe880-0xe89f: in range
>> >        map[1c]: type Memory, range 32, base 0xfbeb8000, size 14, enabled
>> > pcib1: requested memory range 0xfbeb8000-0xfbebbfff: good
>> > pcib1: matched entry for 7.0.INTA
>> > pcib1: slot 0 INTA hardwired to IRQ 28
>> > found-> vendor=0x8086, dev=0x10c9, revid=0x01
>> >        domain=0, bus=7, slot=0, func=1
>> >        class=02-00-00, hdrtype=0x00, mfdev=1
>> >        cmdreg=0x0147, statreg=0x0010, cachelnsz=64 (dwords)
>> >        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>> >        intpin=b, irq=5
>> >        powerspec 3  supports D0 D3  current D0
>> >        MSI supports 1 message, 64 bit, vector masks
>> >        MSI-X supports 10 messages in map 0x1c
>> >        map[10]: type Memory, range 32, base 0xfbee0000, size 17, enabled
>> > pcib1: requested memory range 0xfbee0000-0xfbefffff: good
>> >        map[14]: type Memory, range 32, base 0xfbec0000, size 17, enabled
>> > pcib1: requested memory range 0xfbec0000-0xfbedffff: good
>> >        map[18]: type I/O Port, range 32, base 0xec00, size  5, enabled
>> > pcib1: requested I/O range 0xec00-0xec1f: in range
>> >        map[1c]: type Memory, range 32, base 0xfbebc000, size 14, enabled
>> > pcib1: requested memory range 0xfbebc000-0xfbebffff: good
>> > pcib1: matched entry for 7.0.INTB
>> > pcib1: slot 0 INTB hardwired to IRQ 40
>> > igb0: <Intel(R) PRO/1000 Network Connection version - 1.7.3> port
>> > 0xe880-0xe89f mem
>> > 0xfbe60000-0xfbe7ffff,0xfbe40000-0xfbe5ffff,0xfbeb8000-0xfbebbfff irq 28
>> at
>> > device 0.0 on pci7
>> > igb0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfbe60000
>> > igb0: Reserved 0x4000 bytes for rid 0x1c type 3 at 0xfbeb8000
>> > igb0: attempting to allocate 3 MSI-X vectors (10 supported)
>> > msi: routing MSI-X IRQ 256 to local APIC 16 vector 49
>> > msi: routing MSI-X IRQ 257 to local APIC 16 vector 50
>> > msi: routing MSI-X IRQ 258 to local APIC 16 vector 51
>> > igb0: using IRQs 256-258 for MSI-X
>> > igb0: Using MSIX interrupts with 3 vectors
>> > igb0: [MPSAFE]
>> > igb0: [ITHREAD]
>> > igb0: [MPSAFE]
>> > igb0: [ITHREAD]
>> > igb0: [MPSAFE]
>> > igb0: [ITHREAD]
>> > igb0: bpf attached
>> > igb0: Ethernet address: d8:d3:85:b5:ec:2e
>> > igb1: <Intel(R) PRO/1000 Network Connection version - 1.7.3> port
>> > 0xec00-0xec1f mem
>> > 0xfbee0000-0xfbefffff,0xfbec0000-0xfbedffff,0xfbebc000-0xfbebffff irq 40
>> at
>> > device 0.1 on pci7
>> > igb1: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfbee0000
>> > igb1: Reserved 0x4000 bytes for rid 0x1c type 3 at 0xfbebc000
>> > igb1: attempting to allocate 3 MSI-X vectors (10 supported)
>> > msi: routing MSI-X IRQ 259 to local APIC 16 vector 52
>> > msi: routing MSI-X IRQ 260 to local APIC 16 vector 53
>> > msi: routing MSI-X IRQ 261 to local APIC 16 vector 54
>> > igb1: using IRQs 259-261 for MSI-X
>> > igb1: Using MSIX interrupts with 3 vectors
>> > igb1: [MPSAFE]
>> > igb1: [ITHREAD]
>> > igb1: [MPSAFE]
>> > igb1: [ITHREAD]
>> > igb1: [MPSAFE]
>> > igb1: [ITHREAD]
>> > igb1: bpf attached
>> > igb1: Ethernet address: d8:d3:85:b5:ec:2f
>> > pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0
>> > pcib2:   domain            0
>> > pcib2:   secondary bus     6
>> > pcib2:   subordinate bus   6
>> > pcib2:   I/O decode        0xd000-0xdfff
>> > pcib2:   memory decode     0xfb800000-0xfbdfffff
>> > pcib2:   no prefetched decode
>> > pci6: <ACPI PCI bus> on pcib2
>> > pci6: domain=0, physical bus=6
>> > found-> vendor=0x103c, dev=0x323a, revid=0x01
>> >        domain=0, bus=6, slot=0, func=0
>> >        class=01-04-00, hdrtype=0x00, mfdev=0
>> >        cmdreg=0x0047, statreg=0x0010, cachelnsz=64 (dwords)
>> >        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>> >        intpin=a, irq=10
>> >        powerspec 3  supports D0 D1 D3  current D0
>> >        MSI supports 1 message, 64 bit
>> >        MSI-X supports 16 messages in map 0x10
>> >        map[10]: type Memory, range 64, base 0xfb800000, size 22, enabled
>> > pcib2: requested memory range 0xfb800000-0xfbbfffff: good
>> >        map[18]: type Memory, range 64, base 0xfbdff000, size 12, enabled
>> > pcib2: requested memory range 0xfbdff000-0xfbdfffff: good
>> >        map[20]: type I/O Port, range 32, base 0xd800, size  8, enabled
>> > pcib2: requested I/O range 0xd800-0xd8ff: in range
>> > pcib2: matched entry for 6.0.INTA
>> > pcib2: slot 0 INTA hardwired to IRQ 24
>> > ciss0: <HP Smart Array P212> port 0xd800-0xd8ff mem
>> > 0xfb800000-0xfbbfffff,0xfbdff000-0xfbdfffff irq 24 at device 0.0 on pci6
>> > ciss0: Reserved 0x400000 bytes for rid 0x10 type 3 at 0xfb800000
>> > ciss0: PERFORMANT Transport
>> > ciss0: attempting to allocate 1 MSI-X vectors (16 supported)
>> > msi: routing MSI-X IRQ 262 to local APIC 16 vector 55
>> > ciss0: using IRQ 262 for MSI-X
>> > ciss0: Using 1 MSIX interrupt
>> > ciss0: [MPSAFE]
>> > ciss0: [ITHREAD]
>> > ciss0: using 32 of 32 available commands
>> > ciss0:   firmware 3.00
>> > ciss0:   1 SCSI channels
>> > ciss0:   signature 'CISS'
>> > ciss0:   valence 3
>> > ciss0:   supported I/O methods 0x78000007<READY,simple,performant>
>> > ciss0:   active I/O method 0x5<performant>
>> > ciss0:   4G page base 0x00000000
>> > ciss0:   interrupt coalesce delay 0us
>> > ciss0:   interrupt coalesce count 16
>> > ciss0:   max outstanding commands 32
>> > ciss0:   bus types 0x200000
>> > ciss0:   server name 'SGH931X7JB'
>> > ciss0:   heartbeat 0x2ba
>> > ciss0: 2 physical devices
>> > ciss0: 0 logical drives
>> > pcib3: <ACPI PCI-PCI bridge> at device 7.0 on pci0
>> > pcib3:   domain            0
>> > pcib3:   secondary bus     5
>> > pcib3:   subordinate bus   5
>> > pcib3:   I/O decode        0x0-0x0
>> > pcib3:   no prefetched decode
>> > pci5: <ACPI PCI bus> on pcib3
>> > pci5: domain=0, physical bus=5
>> > pcib4: <ACPI PCI-PCI bridge> at device 9.0 on pci0
>> > pcib4:   domain            0
>> > pcib4:   secondary bus     4
>> > pcib4:   subordinate bus   4
>> > pcib4:   I/O decode        0xc000-0xcfff
>> > pcib4:   memory decode     0xfb300000-0xfb7fffff
>> > pcib4:   no prefetched decode
>> > pci4: <ACPI PCI bus> on pcib4
>> > pci4: domain=0, physical bus=4
>> > found-> vendor=0x103c, dev=0x323a, revid=0x01
>> >        domain=0, bus=4, slot=0, func=0
>> >        class=01-04-00, hdrtype=0x00, mfdev=0
>> >        cmdreg=0x0047, statreg=0x0010, cachelnsz=64 (dwords)
>> >        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>> >        intpin=a, irq=10
>> >        powerspec 3  supports D0 D1 D3  current D0
>> >        MSI supports 1 message, 64 bit
>> >        MSI-X supports 16 messages in map 0x10
>> >        map[10]: type Memory, range 64, base 0xfb400000, size 22, enabled
>> > pcib4: requested memory range 0xfb400000-0xfb7fffff: good
>> >        map[18]: type Memory, range 64, base 0xfb3ff000, size 12, enabled
>> > pcib4: requested memory range 0xfb3ff000-0xfb3fffff: good
>> >        map[20]: type I/O Port, range 32, base 0xc800, size  8, enabled
>> > pcib4: requested I/O range 0xc800-0xc8ff: in range
>> > pcib4: matched entry for 4.0.INTA
>> > pcib4: slot 0 INTA hardwired to IRQ 32
>> > ciss1: <HP Smart Array P410> port 0xc800-0xc8ff mem
>> > 0xfb400000-0xfb7fffff,0xfb3ff000-0xfb3fffff irq 32 at device 0.0 on pci4
>> > ciss1: Reserved 0x400000 bytes for rid 0x10 type 3 at 0xfb400000
>> > ciss1: PERFORMANT Transport
>> > ciss1: attempting to allocate 1 MSI-X vectors (16 supported)
>> > msi: routing MSI-X IRQ 263 to local APIC 16 vector 56
>> > ciss1: using IRQ 263 for MSI-X
>> > ciss1: Using 1 MSIX interrupt
>> > ciss1: [MPSAFE]
>> > ciss1: [ITHREAD]
>> > ciss1: using 256 of 1024 available commands
>> > ciss1:   firmware 3.00
>> > ciss1:   1 SCSI channels
>> > ciss1:   signature 'CISS'
>> > ciss1:   valence 3
>> > ciss1:   supported I/O methods 0x78000007<READY,simple,performant>
>> > ciss1:   active I/O method 0x5<performant>
>> > ciss1:   4G page base 0x00000000
>> > ciss1:   interrupt coalesce delay 0us
>> > ciss1:   interrupt coalesce count 16
>> > ciss1:   max outstanding commands 1024
>> > ciss1:   bus types 0x200000
>> > ciss1:   server name 'USE179N286'
>> > ciss1:   heartbeat 0x270
>> > ciss1: 5 physical devices
>> > ciss1: 1 logical drive
>> > ciss1: logical drive (b0t0): RAID ADG, 1907200MB online
>> > pci0: <base peripheral, interrupt controller> at device 20.0 (no driver
>> > attached)
>> > pci0: <base peripheral, interrupt controller> at device 20.1 (no driver
>> > attached)
>> > pci0: <base peripheral, interrupt controller> at device 20.2 (no driver
>> > attached)
>> > uhci0: <UHCI (generic) USB controller> port 0xa800-0xa81f irq 16 at
>> device
>> > 26.0 on pci0
>> > uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xa800
>> > ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 16 vector 57
>> > uhci0: [MPSAFE]
>> > uhci0: [ITHREAD]
>> > uhci0: LegSup = 0x0430
>> > usbus0: <UHCI (generic) USB controller> on uhci0
>> > ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfa7f8000-0xfa7f83ff irq
>> 18
>> > at device 26.7 on pci0
>> > ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfa7f8000
>> > ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 16 vector 58
>> > ehci0: [MPSAFE]
>> > ehci0: [ITHREAD]
>> > usbus1: EHCI version 1.0
>> > usbus1: <EHCI (generic) USB 2.0 controller> on ehci0
>> > pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
>> > pcib5:   domain            0
>> > pcib5:   secondary bus     3
>> > pcib5:   subordinate bus   3
>> > pcib5:   I/O decode        0x0-0x0
>> > pcib5:   prefetched decode 0xf9f00000-0xf9ffffff
>> > pci3: <ACPI PCI bus> on pcib5
>> > pci3: domain=0, physical bus=3
>> > pcib6: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
>> > pcib6:   domain            0
>> > pcib6:   secondary bus     2
>> > pcib6:   subordinate bus   2
>> > pcib6:   I/O decode        0xf000-0xfff
>> > pcib6:   memory decode     0xfa800000-0xfb2fffff
>> > pcib6:   prefetched decode 0xf8000000-0xf8ffffff
>> > pci2: <ACPI PCI bus> on pcib6
>> > pci2: domain=0, physical bus=2
>> > found-> vendor=0x102b, dev=0x0522, revid=0x02
>> >        domain=0, bus=2, slot=0, func=0
>> >        class=03-00-00, hdrtype=0x00, mfdev=0
>> >        cmdreg=0x0047, statreg=0x1010, cachelnsz=64 (dwords)
>> >        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>> >        intpin=a, irq=10
>> >        powerspec 2  supports D0 D3  current D0
>> >        MSI supports 1 message
>> >        map[10]: type Prefetchable Memory, range 32, base 0xf8000000,
>> size
>> > 24, enabled
>> > pcib6: requested memory range 0xf8000000-0xf8ffffff: good
>> >        map[14]: type Memory, range 32, base 0xfb2fc000, size 14, enabled
>> > pcib6: requested memory range 0xfb2fc000-0xfb2fffff: good
>> >        map[18]: type Memory, range 32, base 0xfa800000, size 23, enabled
>> > pcib6: requested memory range 0xfa800000-0xfaffffff: good
>> > pcib6: matched entry for 2.0.INTA
>> > pcib6: slot 0 INTA hardwired to IRQ 16
>> > vgapci0: <VGA-compatible display> mem
>> > 0xf8000000-0xf8ffffff,0xfb2fc000-0xfb2fffff,0xfa800000-0xfaffffff irq 16
>> at
>> > device 0.0 on pci2
>> > uhci1: <UHCI (generic) USB controller> port 0xa880-0xa89f irq 23 at
>> device
>> > 29.0 on pci0
>> > uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xa880
>> > ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 16 vector 59
>> > uhci1: [MPSAFE]
>> > uhci1: [ITHREAD]
>> > uhci1: LegSup = 0x0430
>> > usbus2: <UHCI (generic) USB controller> on uhci1
>> > uhci2: <UHCI (generic) USB controller> port 0xac00-0xac1f irq 19 at
>> device
>> > 29.1 on pci0
>> > uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xac00
>> > ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 16 vector 60
>> > uhci2: [MPSAFE]
>> > uhci2: [ITHREAD]
>> > uhci2: LegSup = 0x0430
>> > usbus3: <UHCI (generic) USB controller> on uhci2
>> > uhci3: <UHCI (generic) USB controller> port 0xb000-0xb01f irq 18 at
>> device
>> > 29.2 on pci0
>> > uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xb000
>> > uhci3: [MPSAFE]
>> > uhci3: [ITHREAD]
>> > uhci3: LegSup = 0x0430
>> > usbus4: <UHCI (generic) USB controller> on uhci3
>> > ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfa7fa000-0xfa7fa3ff irq
>> 23
>> > at device 29.7 on pci0
>> > ehci1: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfa7fa000
>> > ehci1: [MPSAFE]
>> > ehci1: [ITHREAD]
>> > usbus5: EHCI version 1.0
>> > usbus5: <EHCI (generic) USB 2.0 controller> on ehci1
>> > pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
>> > pcib7:   domain            0
>> > pcib7:   secondary bus     1
>> > pcib7:   subordinate bus   1
>> > pcib7:   I/O decode        0x0-0x0
>> > pcib7:   no prefetched decode
>> > pcib7:   Subtractively decoded bridge.
>> > pcib7: could not get PCI interrupt routing table for \\_SB_.PCI0.P0P1 -
>> > AE_NOT_FOUND
>> > pci1: <ACPI PCI bus> on pcib7
>> > pci1: domain=0, physical bus=1
>> > isab0: <PCI-ISA bridge> at device 31.0 on pci0
>> > isa0: <ISA bus> on isab0
>> > atapci0: <Intel ICH10 SATA300 controller> port
>> > 0xb880-0xb887,0xb800-0xb803,0xb480-0xb487,0xb400-0xb403,0xb080-0xb09f
>> mem
>> > 0xfa7fc000-0xfa7fc7ff irq 19 at device 31.2 on pci0
>> > atapci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xb080
>> > atapci0: [MPSAFE]
>> > atapci0: [ITHREAD]
>> > atapci0: Reserved 0x800 bytes for rid 0x24 type 3 at 0xfa7fc000
>> > atapci0: AHCI called from vendor specific driver
>> > atapci0: AHCI v1.20 controller with 6 1.5Gbps ports, PM not supported
>> > atapci0: Caps: 64bit NCQ SNTF SS ALP AL CLO 1.5Gbps PMD SSC PSC 32cmd
>> CCC EM
>> > eSATA 6ports
>> > ata2: <ATA channel 0> on atapci0
>> > ata2: AHCI reset...
>> > ata2: hardware reset ...
>> > ata2: SATA connect timeout status=00000000
>> > ata2: AHCI reset done: phy reset found no device
>> > ata2: [MPSAFE]
>> > ata2: [ITHREAD]
>> > ata3: <ATA channel 1> on atapci0
>> > ata3: AHCI reset...
>> > ata3: hardware reset ...
>> > ata3: SATA connect timeout status=00000000
>> > ata3: AHCI reset done: phy reset found no device
>> > ata3: [MPSAFE]
>> > ata3: [ITHREAD]
>> > ata4: <ATA channel 2> on atapci0
>> > ata4: AHCI reset...
>> > ata4: hardware reset ...
>> > ata4: SATA connect timeout status=00000000
>> > ata4: AHCI reset done: phy reset found no device
>> > ata4: [MPSAFE]
>> > ata4: [ITHREAD]
>> > ata5: <ATA channel 3> on atapci0
>> > ata5: AHCI reset...
>> > ata5: hardware reset ...
>> > ata5: SATA connect timeout status=00000000
>> > ata5: AHCI reset done: phy reset found no device
>> > ata5: [MPSAFE]
>> > ata5: [ITHREAD]
>> > ata6: <ATA channel 4> on atapci0
>> > ata6: AHCI reset...
>> > ata6: hardware reset ...
>> > ata6: SATA connect time=0ms status=00000113
>> > ata6: ready wait time=0ms
>> > ata6: software reset port 0...
>> > ata6: ready wait time=0ms
>> > ata6: SIGNATURE: eb140101
>> > ata6: AHCI reset done: devices=00010000
>> > ata6: [MPSAFE]
>> > ata6: [ITHREAD]
>> > ata7: <ATA channel 5> on atapci0
>> > ata7: AHCI reset...
>> > ata7: hardware reset ...
>> > ata7: SATA connect timeout status=00000000
>> > ata7: AHCI reset done: phy reset found no device
>> > ata7: [MPSAFE]
>> > ata7: [ITHREAD]
>> > acpi_button0: <Power Button> on acpi0
>> > atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
>> > atrtc0: registered as a time-of-day clock (resolution 1000000us)
>> > uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
>> > ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 16 vector 61
>> > uart0: [FILTER]
>> > uart0: fast interrupt
>> > cpu0: <ACPI CPU> on acpi0
>> > ACPI: SSDT 0xbf77e1c0 013CC (v1 DpgPmm  P001Ist 00000011 INTL 20051117)
>> > ACPI: SSDT 0xbf77f590 00659 (v1  PmRef  P001Cst 00003001 INTL 20051117)
>> > est0: <Enhanced SpeedStep Frequency Control> on cpu0
>> > est0: Invalid id16 (set, cur) = (16, 17)
>> > est0: Invalid freq 2133, ignored.
>> > est0: Invalid id16 (set, cur) = (15, 17)
>> > est0: Invalid freq 2000, ignored.
>> > est0: Invalid id16 (set, cur) = (14, 17)
>> > est0: Invalid freq 1867, ignored.
>> > est0: Invalid id16 (set, cur) = (13, 17)
>> > est0: Invalid freq 1733, ignored.
>> > est0: Invalid id16 (set, cur) = (12, 17)
>> > est0: Invalid freq 1600, ignored.
>> > p4tcc0: <CPU Frequency Thermal Control> on cpu0
>> > cpu1: <ACPI CPU> on acpi0
>> > est1: <Enhanced SpeedStep Frequency Control> on cpu1
>> > est1: Invalid id16 (set, cur) = (16, 17)
>> > est1: Invalid freq 2133, ignored.
>> > est1: Invalid id16 (set, cur) = (15, 17)
>> > est1: Invalid freq 2000, ignored.
>> > est1: Invalid id16 (set, cur) = (14, 17)
>> > est1: Invalid freq 1867, ignored.
>> > est1: Invalid id16 (set, cur) = (13, 17)
>> > est1: Invalid freq 1733, ignored.
>> > est1: Invalid id16 (set, cur) = (12, 17)
>> > est1: Invalid freq 1600, ignored.
>> > p4tcc1: <CPU Frequency Thermal Control> on cpu1
>> > cpu2: <ACPI CPU> on acpi0
>> > est2: <Enhanced SpeedStep Frequency Control> on cpu2
>> > est2: Invalid id16 (set, cur) = (16, 17)
>> > est2: Invalid freq 2133, ignored.
>> > est2: Invalid id16 (set, cur) = (15, 17)
>> > est2: Invalid freq 2000, ignored.
>> > est2: Invalid id16 (set, cur) = (14, 17)
>> > est2: Invalid freq 1867, ignored.
>> > est2: Invalid id16 (set, cur) = (13, 17)
>> > est2: Invalid freq 1733, ignored.
>> > est2: Invalid id16 (set, cur) = (12, 17)
>> > est2: Invalid freq 1600, ignored.
>> > p4tcc2: <CPU Frequency Thermal Control> on cpu2
>> > cpu3: <ACPI CPU> on acpi0
>> > est3: <Enhanced SpeedStep Frequency Control> on cpu3
>> > est3: Invalid id16 (set, cur) = (16, 17)
>> > est3: Invalid freq 2133, ignored.
>> > est3: Invalid id16 (set, cur) = (15, 17)
>> > est3: Invalid freq 2000, ignored.
>> > est3: Invalid id16 (set, cur) = (14, 17)
>> > est3: Invalid freq 1867, ignored.
>> > est3: Invalid id16 (set, cur) = (13, 17)
>> > est3: Invalid freq 1733, ignored.
>> > est3: Invalid id16 (set, cur) = (12, 17)
>> > est3: Invalid freq 1600, ignored.
>> > p4tcc3: <CPU Frequency Thermal Control> on cpu3
>> > cpu4: <ACPI CPU> on acpi0
>> > est4: <Enhanced SpeedStep Frequency Control> on cpu4
>> > est4: Invalid id16 (set, cur) = (16, 17)
>> > est4: Invalid freq 2133, ignored.
>> > est4: Invalid id16 (set, cur) = (15, 17)
>> > est4: Invalid freq 2000, ignored.
>> > est4: Invalid id16 (set, cur) = (14, 17)
>> > est4: Invalid freq 1867, ignored.
>> > est4: Invalid id16 (set, cur) = (13, 17)
>> > est4: Invalid freq 1733, ignored.
>> > est4: Invalid id16 (set, cur) = (12, 17)
>> > est4: Invalid freq 1600, ignored.
>> > p4tcc4: <CPU Frequency Thermal Control> on cpu4
>> > cpu5: <ACPI CPU> on acpi0
>> > est5: <Enhanced SpeedStep Frequency Control> on cpu5
>> > est5: Invalid id16 (set, cur) = (16, 17)
>> > est5: Invalid freq 2133, ignored.
>> > est5: Invalid id16 (set, cur) = (15, 17)
>> > est5: Invalid freq 2000, ignored.
>> > est5: Invalid id16 (set, cur) = (14, 17)
>> > est5: Invalid freq 1867, ignored.
>> > est5: Invalid id16 (set, cur) = (13, 17)
>> > est5: Invalid freq 1733, ignored.
>> > est5: Invalid id16 (set, cur) = (12, 17)
>> > est5: Invalid freq 1600, ignored.
>> > p4tcc5: <CPU Frequency Thermal Control> on cpu5
>> > cpu6: <ACPI CPU> on acpi0
>> > est6: <Enhanced SpeedStep Frequency Control> on cpu6
>> > est6: Invalid id16 (set, cur) = (16, 17)
>> > est6: Invalid freq 2133, ignored.
>> > est6: Invalid id16 (set, cur) = (15, 17)
>> > est6: Invalid freq 2000, ignored.
>> > est6: Invalid id16 (set, cur) = (14, 17)
>> > est6: Invalid freq 1867, ignored.
>> > est6: Invalid id16 (set, cur) = (13, 17)
>> > est6: Invalid freq 1733, ignored.
>> > est6: Invalid id16 (set, cur) = (12, 17)
>> > est6: Invalid freq 1600, ignored.
>> > p4tcc6: <CPU Frequency Thermal Control> on cpu6
>> > cpu7: <ACPI CPU> on acpi0
>> > est7: <Enhanced SpeedStep Frequency Control> on cpu7
>> > est7: Invalid id16 (set, cur) = (16, 17)
>> > est7: Invalid freq 2133, ignored.
>> > est7: Invalid id16 (set, cur) = (15, 17)
>> > est7: Invalid freq 2000, ignored.
>> > est7: Invalid id16 (set, cur) = (14, 17)
>> > est7: Invalid freq 1867, ignored.
>> > est7: Invalid id16 (set, cur) = (13, 17)
>> > est7: Invalid freq 1733, ignored.
>> > est7: Invalid id16 (set, cur) = (12, 17)
>> > est7: Invalid freq 1600, ignored.
>> > p4tcc7: <CPU Frequency Thermal Control> on cpu7
>> > unknown: status reg test failed ff
>> > unknown: status reg test failed ff
>> > unknown: status reg test failed ff
>> > unknown: status reg test failed ff
>> > unknown: status reg test failed ff
>> > unknown: status reg test failed ff
>> > ahc_isa_probe 0: ioport 0xc00 alloc failed
>> > ahc_isa_probe 10: ioport 0xac00 alloc failed
>> > ahc_isa_probe 14: ioport 0xec00 alloc failed
>> > pnp_identify: Trying Read_Port at 203
>> > pnp_identify: Trying Read_Port at 243
>> > pnp_identify: Trying Read_Port at 283
>> > pnp_identify: Trying Read_Port at 2c3
>> > pnp_identify: Trying Read_Port at 303
>> > pnp_identify: Trying Read_Port at 343
>> > pnp_identify: Trying Read_Port at 383
>> > pnp_identify: Trying Read_Port at 3c3
>> > PNP Identify complete
>> > ex_isa_identify()
>> > isa_probe_children: disabling PnP devices
>> > pmtimer0 on isa0
>> > atrtc: atrtc0 already exists; skipping it
>> > sc: sc0 already exists; skipping it
>> > uart: uart0 already exists; skipping it
>> > isa_probe_children: probing non-PnP devices
>> > orm0: <ISA Option ROMs> at iomem
>> > 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xccfff pnpid ORM0000 on isa0
>> > atkbd: the current kbd controller command byte 0087
>> > atkbd: keyboard ID 0x83ab (2)
>> > sc0: <System console> at flags 0x100 on isa0
>> > sc0: VGA <16 virtual consoles, flags=0x300>
>> > sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
>> > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
>> isa0
>> > ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
>> > ata0: reset tp1 mask=00 ostat0=ff ostat1=ff
>> > ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 16 vector 62
>> > ata0: [MPSAFE]
>> > ata0: [ITHREAD]
>> > ata1 at port 0x170-0x177,0x376 irq 15 on isa0
>> > ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
>> > ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 16 vector 63
>> > ata1: [MPSAFE]
>> > ata1: [ITHREAD]
>> > atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
>> > atkbd0: <AT Keyboard> irq 1 on atkbdc0
>> > kbd0 at atkbd0
>> > kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
>> > ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 16 vector 64
>> > atkbd0: [GIANT-LOCKED]
>> > atkbd0: [ITHREAD]
>> > psm0: current command byte:0087
>> > psm0: <PS/2 Mouse> irq 12 on atkbdc0
>> > ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 16 vector 65
>> > psm0: [GIANT-LOCKED]
>> > psm0: [ITHREAD]
>> > psm0: model GlidePoint, device ID 0-00, 3 buttons
>> > psm0: config:00000000, flags:00000008, packet size:3
>> > psm0: syncmask:c0, syncbits:00
>> > fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
>> > ppc0: parallel port not found.
>> > ppc0: <Parallel port> failed to probe at irq 7 on isa0
>> > uart1: <ns8250> failed to probe at port 0x2f8-0x2ff irq 3 on isa0
>> > isa_probe_children: probing PnP devices
>> > Device configuration finished.
>> > Reducing kern.maxvnodes 197947 -> 100000
>> > procfs registered
>> > lapic: Divisor 2, Frequency 66669465 hz
>> > Timecounter "TSC" frequency 2266761792 Hz quality -100
>> > Timecounters tick every 1.000 msec
>> > lo0: bpf attached
>> > hptrr: no controller detected.
>> > ata0: Identifying devices: 00000000
>> > ata0: New devices: 00000000
>> > ata1: Identifying devices: 00000000
>> > ata1: New devices: 00000000
>> > ata2: Identifying devices: 00000000
>> > ata2: New devices: 00000000
>> > ata3: Identifying devices: 00000000
>> > ata3: New devices: 00000000
>> > ata4: Identifying devices: 00000000
>> > ata4: New devices: 00000000
>> > ata5: Identifying devices: 00000000
>> > ata5: New devices: 00000000
>> > ata6: Identifying devices: 00010000
>> > ata6: New devices: 00010000
>> > usbus0: 12Mbps Full Speed USB v1.0
>> > usbus1: 480Mbps High Speed USB v2.0
>> > usbus2: 12Mbps Full Speed USB v1.0
>> > usbus3: 12Mbps Full Speed USB v1.0
>> > usbus4: 12Mbps Full Speed USB v1.0
>> > usbus5: 480Mbps High Speed USB v2.0
>> > ugen0.1: <Intel> at usbus0
>> > uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
>> > ugen1.1: <Intel> at usbus1
>> > uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
>> > ugen2.1: <Intel> at usbus2
>> > uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
>> > ugen3.1: <Intel> at usbus3
>> > uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
>> > ugen4.1: <Intel> at usbus4
>> > uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
>> > ugen5.1: <Intel> at usbus5
>> > uhub5: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
>> > ata6-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire
>> > ata6: device_reset timeout=330us
>> > acd0: <Optiarc DVD RW AD-7561S/AH52> DVDR drive at ata6 as master
>> > acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer,
>> > SATA150
>> > acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
>> > acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof
>> > acd0: Audio: play, 256 volume levels
>> > acd0: Mechanism: ejectable tray, unlocked
>> > acd0: Medium: no/blank disc
>> > ata7: Identifying devices: 00000000
>> > ata7: New devices: 00000000
>> > uhub0: 2 ports with 2 removable, self powered
>> > uhub2: 2 ports with 2 removable, self powered
>> > uhub3: 2 ports with 2 removable, self powered
>> > uhub4: 2 ports with 2 removable, self powered
>> > uhub1: 2 ports with 2 removable, self powered
>> > uhub5: 6 ports with 6 removable, self powered
>> > pass0 at ciss0 bus 32 target 6 lun 0
>> > pass0: <HP Ultrium 4-SCSI U52W> Removable Sequential Access SCSI-5
>> device
>> > pass0: Serial Number HU101099DY
>> > pass0: 135.168MB/s transfers
>> > pass0: Command Queueing enabled
>> > pass1 at ciss1 bus 0 target 0 lun 0
>> > pass1: <COMPAQ RAID ADGVOLUME OK> Fixed Direct Access SCSI-5 device
>> > pass1: Serial Number PACCCOMPAQ  RAID
>> > pass1: 135.168MB/s transfers
>> > pass1: Command Queueing enabled
>> > sa0 at ciss0 bus 32 target 6 lun 0
>> > sa0: <HP Ultrium 4-SCSI U52W> Removable Sequential Access SCSI-5 device
>> > sa0: Serial Number HU101099DY
>> > sa0: 135.168MB/s transfers
>> > sa0: Command Queueing enabled
>> > GEOM: new disk da0da0 at ciss1 bus 0 target 0 lun 0
>> > da0: <COMPAQ RAID ADGVOLUME OK> Fixed Direct Access SCSI-5 device
>> > da0: Serial Number PACCCOMPAQ  RAID
>> > da0: 135.168MB/s transfers
>> > da0: Command Queueing enabled
>> > da0: 1907675MB (3906918832 512 byte sectors: 255H 32S/T 65535C)
>> >
>> > ATA PseudoRAID loaded
>> > SMP: AP CPU #3 Launched!
>> > cpu3 AP:
>> >     ID: 0x13000000   VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
>> >  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
>> >  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
>> > SMP: AP CPU #7 Launched!
>> > cpu7 AP:
>> >     ID: 0x17000000   VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
>> >  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
>> >  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
>> > SMP: AP CPU #2 Launched!
>> > cpu2 AP:
>> >     ID: 0x12000000   VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
>> >  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
>> >  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
>> > SMP: AP CPU #1 Launched!
>> > cpu1 AP:
>> >     ID: 0x11000000   VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
>> >  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
>> >  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
>> > SMP: AP CPU #6 Launched!
>> > cpu6 AP:
>> >     ID: 0x16000000   VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
>> >  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
>> >  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
>> > SMP: AP CPU #4 Launched!
>> > cpu4 AP:
>> >     ID: 0x14000000   VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
>> >  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
>> >  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
>> > SMP: AP CPU #5 Launched!
>> > cpu5 AP:
>> >     ID: 0x15000000   VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
>> >  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
>> >  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
>> > ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 17 vector 48
>> > ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 18 vector 48
>> > ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 19 vector 48
>> > ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 20 vector 48
>> > ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 21 vector 48
>> > ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 22 vector 48
>> > ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 23 vector 48
>> > ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 17 vector 49
>> > msi: Assigning MSI-X IRQ 256 to local APIC 18 vector 49
>> > msi: Assigning MSI-X IRQ 257 to local APIC 19 vector 49
>> > msi: Assigning MSI-X IRQ 258 to local APIC 20 vector 49
>> > msi: Assigning MSI-X IRQ 259 to local APIC 21 vector 49
>> > msi: Assigning MSI-X IRQ 260 to local APIC 22 vector 49
>> > msi: Assigning MSI-X IRQ 261 to local APIC 23 vector 49
>> > msi: Assigning MSI-X IRQ 263 to local APIC 17 vector 50
>> > ugen3.2: <ATEN> at usbus3
>> > ukbd0: <HID Keyboard> on usbus3
>> > kbd2 at ukbd0
>> > kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000
>> > ums0: <HID Mouse> on usbus3
>> > ums0: 5 buttons and [XYZ] coordinates ID=0
>> > Trying to mount root from ufs:/dev/da0s1a
>> > ct_to_ts([2010-07-07 09:48:52]) = 1278496132.000000000
>> > start_init: trying /sbin/init
>> > igb0: Link is up 1000 Mbps Full Duplex
>> > igb0: link state changed to UP
>> >
>> >
>> > while I don't have the cissutil with my freebsd even after I have
>> installed
>> > the ciss-vol-status? what actually is it ?
>> >
>> >
>> > Frank
>> > On Wed, Jul 7, 2010 at 12:28 AM, Sean Bruno <seanbru@yahoo-inc.com>
>> wrote:
>> >
>> >> On Tue, 2010-07-06 at 05:40 -0700, Folkert Saathoff wrote:
>> >>> actually we were having a similar experience with the smartarray
>> p212...
>> >> attached a SAS tape changer (tandbergdata lto-4 autoloader) to it, but
>> could
>> >> only see the tape drive, not the changer. in our case, the p212 was the
>> >> second smartarray controller on the bus (ciss1), with a P410 as the
>> primary
>> >> one. i believe there's a bug about that as well. to contrast, another
>> >> machine with an IBM serveraid SAS controller and the same tape changer
>> works
>> >> quite nicely out of the box with FreeBSD 8.0.
>> >>>
>> >>>
>> >>> please get in touch with me if you're a developer and want to see a
>> dmesg
>> >> or similar.. :)
>> >>>
>> >>> cheers,
>> >>> /folkert
>> >>>
>> >>
>> >> If you could post verbose boot output + sudo cissutil --dump
>> >>
>> >> For example, my ciss controller on an HPDL180G5 looks like this:
>> >>
>> >> controller 0 (HP       P400            )
>> >> logical drives: 2
>> >> running firmware 7.08
>> >> stored firmware 7.08
>> >> scsi bus count 1
>> >> drives per scsi bus 16
>> >> drives
>> >> (b0t8,b0t9,b0t10,b0t11,b0t12,b0t13,b0t14,b0t15,b1t0,b1t1,b1t2,b1t3)
>> >> scsi_bus_count 01
>> >> Battery 0: Not Present/Discharged
>> >> Cache is: Disabled
>> >> Total write cache size = 212992 KB
>> >> Write cache size = 212992 KB
>> >> Read cache size = 0 KB
>> >> Cache disabled map = 0x00000000
>> >> Cache enabled on:       (vol0,vol1)
>> >> rebuild (64) priority 1 ms for every host command
>> >> expand (64) priority 1 ms for every host command
>> >> vol0
>> >>    Volume is bootable:                   YES
>> >>    1 phys drives      (b0t8)
>> >>    status                                 OK
>> >>    failed drives      (none)
>> >>    block size                            512
>> >>    blocks available                585871964
>> >>    fault tolerance                     RAID0
>> >>    spare configured                       NO
>> >>    stripe size                          128k
>> >> vol1
>> >>    Volume is bootable:                   YES
>> >>    5 phys drives      (b0t15,b1t0,b1t1,b1t2,b1t3)
>> >>    status                                 OK
>> >>    failed drives      (none)
>> >>    block size                            512
>> >>    blocks available               4294967295
>> >>    fault tolerance                     RAID0
>> >>    spare configured                       NO
>> >>    stripe size                          128k
>> >>
>> >>
>> >>
>> > _______________________________________________
>> > freebsd-scsi@freebsd.org mailing list
>> > http://lists.freebsd.org/mailman/listinfo/freebsd-scsi
>> > To unsubscribe, send any mail to "freebsd-scsi-unsubscribe@freebsd.org"
>>
>>
>



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?AANLkTilfsd8NUiPpuNcYYZJXu-AtWki0dozTlgGUM1kG>