Date: Wed, 15 Jun 2011 20:37:01 -0400 From: Joshua Boyd <boydjd@jbip.net> To: Jack Vogel <jfvogel@gmail.com> Cc: freebsd-stable <freebsd-stable@freebsd.org>, "Vogel, Jack" <jack.vogel@intel.com>, Jeremy Chadwick <freebsd@jdc.parodius.com> Subject: Re: em0 watchdog timeouts on 8-STABLE Message-ID: <BANLkTi=UPCZms5-t5vgXoS7-ZK4VkXWy8w@mail.gmail.com> In-Reply-To: <BANLkTininFrihBXvsKwAnheqE%2B%2BXoyhCVg@mail.gmail.com> References: <BANLkTinoyV61RzkB8HbHe=AY8zsBov4JXg@mail.gmail.com> <20110615075754.GA54879@icarus.home.lan> <BANLkTim_Y30cXNtvOGg_%2Bj4devU5VtiMxA@mail.gmail.com> <BANLkTininFrihBXvsKwAnheqE%2B%2BXoyhCVg@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
In the kernel. Here's my kernel configuration: http://pastebin.com/raw.php?i=4JL814m3 On Wed, Jun 15, 2011 at 8:20 PM, Jack Vogel <jfvogel@gmail.com> wrote: > I have hardware now, am working on reproducing this. Just curious, do you > have > the em driver defined in the kernel, or as a module? > > Jack > > > On Wed, Jun 15, 2011 at 2:09 AM, Joshua Boyd <boydjd@jbip.net> wrote: > >> On Wed, Jun 15, 2011 at 3:57 AM, Jeremy Chadwick >> <freebsd@jdc.parodius.com>wrote: >> >> > On Wed, Jun 15, 2011 at 03:14:43AM -0400, Joshua Boyd wrote: >> > > I recently updated my server to the latest 8-STABLE, and upgraded to >> v28 >> > > ZFS. I have not had these problems on any other version of 8-STABLE or >> > > 7-STABLE, which this box was upgraded from some time ago. >> > > >> > > Now, during my weekly scrub, I get the following messages and em0 is >> > > unresponsive: >> > > >> > > Jun 12 03:07:58 foghornleghorn kernel: em0: Watchdog timeout -- >> resetting >> > > Jun 12 03:07:58 foghornleghorn kernel: em0: link state changed to DOWN >> > > Jun 12 03:08:01 foghornleghorn kernel: em0: link state changed to UP >> > > Jun 12 03:08:47 foghornleghorn kernel: em0: Watchdog timeout -- >> resetting >> > > Jun 12 03:08:47 foghornleghorn kernel: em0: link state changed to DOWN >> > > Jun 12 03:08:50 foghornleghorn kernel: em0: link state changed to UP >> > > >> > > My scrub is scheduled to start at 03:00:00, so it looks like watchdog >> > > timeouts start occurring pretty quickly once I/O ramps up. >> > > >> > > Here's some possibly relevant information, let me know if anything >> else >> > > would be helpful to troubleshoot. >> > > >> > > FreeBSD foghornleghorn.res.openband.net 8.2-STABLE FreeBSD 8.2-STABLE >> > #17: >> > > Mon Jun 6 19:40:19 EDT 2011 >> > > root@foghornleghorn.res.openband.net: >> /usr/obj/usr/src/sys/FOGHORNLEGHORN >> > > amd64 >> > > >> > > em0: <Intel(R) PRO/1000 Legacy Network Connection 1.0.3> port >> > 0xe800-0xe83f >> > > mem 0xfebe0000-0xfebfffff,0xfebc0000-0xfebdffff irq 20 at device 5.0 >> on >> > pci7 >> > > >> > > em0@pci0:7:5:0: class=0x020000 card=0x13768086 chip=0x107c8086 >> rev=0x05 >> > > hdr=0x00 >> > > vendor = 'Intel Corporation' >> > > device = 'Gigabit Ethernet Controller (Copper) rev 5 >> (82541PI)' >> > > class = network >> > > subclass = ethernet >> > > >> > > And, the SAS cards: >> > > >> > > dev.mpt.0.%desc: LSILogic SAS/SATA Adapter >> > > dev.mpt.0.%driver: mpt >> > > dev.mpt.0.%location: slot=0 function=0 >> > > dev.mpt.0.%pnpinfo: vendor=0x1000 device=0x0058 subvendor=0x15d9 >> > > subdevice=0xa580 class=0x010000 >> > > dev.mpt.0.%parent: pci1 >> > > dev.mpt.0.debug: 3 >> > > dev.mpt.0.role: 1 >> > > dev.mpt.1.%desc: LSILogic SAS/SATA Adapter >> > > dev.mpt.1.%driver: mpt >> > > dev.mpt.1.%location: slot=0 function=0 >> > > dev.mpt.1.%pnpinfo: vendor=0x1000 device=0x0058 subvendor=0x15d9 >> > > subdevice=0xa580 class=0x010000 >> > > dev.mpt.1.%parent: pci2 >> > > dev.mpt.1.debug: 3 >> > > dev.mpt.1.role: 1 >> > > dev.mpt.2.%desc: LSILogic SAS/SATA Adapter >> > > dev.mpt.2.%driver: mpt >> > > dev.mpt.2.%location: slot=0 function=0 >> > > dev.mpt.2.%pnpinfo: vendor=0x1000 device=0x0058 subvendor=0x1000 >> > > subdevice=0x30a0 class=0x010000 >> > > dev.mpt.2.%parent: pci6 >> > > dev.mpt.2.debug: 3 >> > > dev.mpt.2.role: 1 >> > >> > Please provide output from the following commands (as root): >> > >> > # pciconf -lvcb >> > >> >> hostb0@pci0:0:0:0: class=0x060000 card=0x59561002 chip=0x59561002 >> rev=0x00 >> hdr=0x00 >> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >> device = 'RD790 GFX Dual Slot' >> class = bridge >> subclass = HOST-PCI >> pcib1@pci0:0:2:0: class=0x060400 card=0x59561002 chip=0x59781002 rev=0x00 >> hdr=0x01 >> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >> device = 'RD790 PCI to PCI bridge (external gfx0 port A)' >> class = bridge >> subclass = PCI-PCI >> pcib2@pci0:0:3:0: class=0x060400 card=0x59561002 chip=0x59791002 rev=0x00 >> hdr=0x01 >> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >> device = 'RD790 PCI to PCI bridge (external gfx0 port B)' >> class = bridge >> subclass = PCI-PCI >> pcib3@pci0:0:4:0: class=0x060400 card=0x59561002 chip=0x597a1002 rev=0x00 >> hdr=0x01 >> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >> device = 'RD790 PCI to PCI bridge (PCIe gpp port A)' >> class = bridge >> subclass = PCI-PCI >> pcib4@pci0:0:6:0: class=0x060400 card=0x59561002 chip=0x597c1002 rev=0x00 >> hdr=0x01 >> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >> device = 'RD790 PCI to PCI bridge (PCIe gpp port C)' >> class = bridge >> subclass = PCI-PCI >> pcib5@pci0:0:7:0: class=0x060400 card=0x59561002 chip=0x597d1002 rev=0x00 >> hdr=0x01 >> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >> device = 'RD790 PCI to PCI bridge (PCIe gpp port D)' >> class = bridge >> subclass = PCI-PCI >> pcib6@pci0:0:11:0: class=0x060400 card=0x59561002 chip=0x59801002 >> rev=0x00 >> hdr=0x01 >> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >> device = 'RD790 PCI to PCI bridge (external gfx1 port A)' >> class = bridge >> subclass = PCI-PCI >> atapci4@pci0:0:18:0: class=0x01018f card=0x81ef1043 chip=0x43801002 >> rev=0x00 >> hdr=0x00 >> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >> device = 'IXP SB600 Serial ATA Controller' >> class = mass storage >> subclass = ATA >> ohci0@pci0:0:19:0: class=0x0c0310 card=0x82881043 chip=0x43871002 >> rev=0x00 >> hdr=0x00 >> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >> device = 'IXP SB600 USB Controller (OHCI0)' >> class = serial bus >> subclass = USB >> ohci1@pci0:0:19:1: class=0x0c0310 card=0x82881043 chip=0x43881002 >> rev=0x00 >> hdr=0x00 >> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >> device = 'IXP SB600 USB Controller (OHCI1)' >> class = serial bus >> subclass = USB >> ohci2@pci0:0:19:2: class=0x0c0310 card=0x82881043 chip=0x43891002 >> rev=0x00 >> hdr=0x00 >> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >> device = 'IXP SB600 USB Controller (OHCI2)' >> class = serial bus >> subclass = USB >> ohci3@pci0:0:19:3: class=0x0c0310 card=0x82881043 chip=0x438a1002 >> rev=0x00 >> hdr=0x00 >> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >> device = 'IXP SB600 USB Controller (OHCI3)' >> class = serial bus >> subclass = USB >> ohci4@pci0:0:19:4: class=0x0c0310 card=0x82881043 chip=0x438b1002 >> rev=0x00 >> hdr=0x00 >> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >> device = 'IXP SB600 USB Controller (OHCI4)' >> class = serial bus >> subclass = USB >> ehci0@pci0:0:19:5: class=0x0c0320 card=0x82881043 chip=0x43861002 >> rev=0x00 >> hdr=0x00 >> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >> device = 'IXP SB600 USB Controller (EHCI)' >> class = serial bus >> subclass = USB >> none0@pci0:0:20:0: class=0x0c0500 card=0x82881043 chip=0x43851002 >> rev=0x14 >> hdr=0x00 >> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >> device = 'ATI SMBus (ATI RD600/RS600)' >> class = serial bus >> subclass = SMBus >> atapci5@pci0:0:20:1: class=0x01018a card=0x82881043 chip=0x438c1002 >> rev=0x00 >> hdr=0x00 >> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >> device = 'ATI RD600/RS600 IDE Controller (RD600/RS600)' >> class = mass storage >> subclass = ATA >> none1@pci0:0:20:2: class=0x040300 card=0x82881043 chip=0x43831002 >> rev=0x00 >> hdr=0x00 >> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >> device = 'IXP SB600 High Definition Audio Controller' >> class = multimedia >> subclass = HDA >> isab0@pci0:0:20:3: class=0x060100 card=0x82881043 chip=0x438d1002 >> rev=0x00 >> hdr=0x00 >> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >> device = 'IXP SB600 PCI to LPC Bridge' >> class = bridge >> subclass = PCI-ISA >> pcib7@pci0:0:20:4: class=0x060401 card=0x00000000 chip=0x43841002 >> rev=0x00 >> hdr=0x01 >> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >> device = 'IXP SB600 PCI to PCI Bridge' >> class = bridge >> subclass = PCI-PCI >> hostb1@pci0:0:24:0: class=0x060000 card=0x00000000 chip=0x12001022 >> rev=0x00 >> hdr=0x00 >> vendor = 'Advanced Micro Devices (AMD)' >> device = '(Family 10h) Athlon64/Opteron/Sempron HyperTransport >> Technology Configuration' >> class = bridge >> subclass = HOST-PCI >> hostb2@pci0:0:24:1: class=0x060000 card=0x00000000 chip=0x12011022 >> rev=0x00 >> hdr=0x00 >> vendor = 'Advanced Micro Devices (AMD)' >> device = '(Family 10h) Athlon64/Opteron/Sempron Address Map' >> class = bridge >> subclass = HOST-PCI >> hostb3@pci0:0:24:2: class=0x060000 card=0x00000000 chip=0x12021022 >> rev=0x00 >> hdr=0x00 >> vendor = 'Advanced Micro Devices (AMD)' >> device = '(Family 10h) Athlon64/Opteron/Sempron DRAM Controller' >> class = bridge >> subclass = HOST-PCI >> hostb4@pci0:0:24:3: class=0x060000 card=0x00000000 chip=0x12031022 >> rev=0x00 >> hdr=0x00 >> vendor = 'Advanced Micro Devices (AMD)' >> device = '(Family 10h) Athlon64/Opteron/Sempron Miscellaneous >> Control' >> class = bridge >> subclass = HOST-PCI >> hostb5@pci0:0:24:4: class=0x060000 card=0x00000000 chip=0x12041022 >> rev=0x00 >> hdr=0x00 >> vendor = 'Advanced Micro Devices (AMD)' >> device = '(Family 10h) Athlon64/Opteron/Sempron Link Control' >> class = bridge >> subclass = HOST-PCI >> mpt0@pci0:1:0:0: class=0x010000 card=0xa58015d9 chip=0x00581000 rev=0x08 >> hdr=0x00 >> vendor = 'LSI Logic (Was: Symbios Logic, NCR)' >> device = 'SAS 3000 series, 8-port with 1068E -StorPort' >> class = mass storage >> subclass = SCSI >> mpt1@pci0:2:0:0: class=0x010000 card=0xa58015d9 chip=0x00581000 rev=0x08 >> hdr=0x00 >> vendor = 'LSI Logic (Was: Symbios Logic, NCR)' >> device = 'SAS 3000 series, 8-port with 1068E -StorPort' >> class = mass storage >> subclass = SCSI >> atapci0@pci0:3:0:0: class=0x01018f card=0x612111ab chip=0x612111ab >> rev=0xb1 >> hdr=0x00 >> vendor = 'Marvell Semiconductor (Was: Galileo Technology Ltd)' >> device = '6121 SATA2 Controller' >> class = mass storage >> subclass = ATA >> mskc0@pci0:4:0:0: class=0x020000 card=0x81f81043 chip=0x436411ab rev=0x12 >> hdr=0x00 >> vendor = 'Marvell Semiconductor (Was: Galileo Technology Ltd)' >> device = 'Yukon PCI-E Gigabit Ethernet Controller (88E8056)' >> class = network >> subclass = ethernet >> atapci2@pci0:5:0:0: class=0x01018f card=0x612111ab chip=0x612111ab >> rev=0xb2 >> hdr=0x00 >> vendor = 'Marvell Semiconductor (Was: Galileo Technology Ltd)' >> device = '6121 SATA2 Controller' >> class = mass storage >> subclass = ATA >> mpt2@pci0:6:0:0: class=0x010000 card=0x30a01000 chip=0x00581000 rev=0x08 >> hdr=0x00 >> vendor = 'LSI Logic (Was: Symbios Logic, NCR)' >> device = 'SAS 3000 series, 8-port with 1068E -StorPort' >> class = mass storage >> subclass = SCSI >> em0@pci0:7:5:0: class=0x020000 card=0x13768086 chip=0x107c8086 rev=0x05 >> hdr=0x00 >> vendor = 'Intel Corporation' >> device = 'Gigabit Ethernet Controller (Copper) rev 5 (82541PI)' >> class = network >> subclass = ethernet >> vgapci0@pci0:7:6:0: class=0x030000 card=0x00000000 chip=0x88115333 >> rev=0x44 >> hdr=0x00 >> vendor = 'S3 Graphics Co., Ltd' >> device = '86C732 Trio32, 86C764 Trio64, 86C765 Trio64V+ Rev 01' >> class = display >> subclass = VGA >> none2@pci0:7:8:0: class=0x0c0010 card=0x82941043 chip=0x581111c1 rev=0x70 >> hdr=0x00 >> vendor = 'Lucent/Agere Systems (Was: AT&T MicroElectronics)' >> device = '1394A PCI PHY/Link Open Host Ctrlr I/F (FW322)' >> class = serial bus >> subclass = FireWire >> [josh@foghornleghorn /var/log]$ sudo su - >> foghornleghorn# pciconf -lvcb >> hostb0@pci0:0:0:0: class=0x060000 card=0x59561002 chip=0x59561002 >> rev=0x00 >> hdr=0x00 >> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >> device = 'RD790 GFX Dual Slot' >> class = bridge >> subclass = HOST-PCI >> cap 08[c4] = HT slave >> cap 08[40] = HT retry mode >> cap 08[54] = HT unit ID clumping >> cap 08[9c] = HT unknown d03c >> pcib1@pci0:0:2:0: class=0x060400 card=0x59561002 chip=0x59781002 rev=0x00 >> hdr=0x01 >> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >> device = 'RD790 PCI to PCI bridge (external gfx0 port A)' >> class = bridge >> subclass = PCI-PCI >> cap 01[50] = powerspec 3 supports D0 D3 current D0 >> cap 10[58] = PCI-Express 2 root port max data 128(128) link x4(x8) >> cap 05[a0] = MSI supports 1 message >> cap 0d[b0] = PCI Bridge card=0x59561002 >> cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000 >> ecap 000b[100] = unknown 1 >> ecap 0002[110] = VC 1 max VC0 >> pcib2@pci0:0:3:0: class=0x060400 card=0x59561002 chip=0x59791002 rev=0x00 >> hdr=0x01 >> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >> device = 'RD790 PCI to PCI bridge (external gfx0 port B)' >> class = bridge >> subclass = PCI-PCI >> cap 01[50] = powerspec 3 supports D0 D3 current D0 >> cap 10[58] = PCI-Express 2 root port max data 128(128) link x4(x8) >> cap 05[a0] = MSI supports 1 message >> cap 0d[b0] = PCI Bridge card=0x59561002 >> cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000 >> ecap 000b[100] = unknown 1 >> ecap 0002[110] = VC 1 max VC0 >> pcib3@pci0:0:4:0: class=0x060400 card=0x59561002 chip=0x597a1002 rev=0x00 >> hdr=0x01 >> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >> device = 'RD790 PCI to PCI bridge (PCIe gpp port A)' >> class = bridge >> subclass = PCI-PCI >> cap 01[50] = powerspec 3 supports D0 D3 current D0 >> cap 10[58] = PCI-Express 2 root port max data 128(128) link x1(x2) >> cap 05[a0] = MSI supports 1 message >> cap 0d[b0] = PCI Bridge card=0x59561002 >> cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000 >> ecap 000b[100] = unknown 1 >> ecap 0002[110] = VC 1 max VC0 >> pcib4@pci0:0:6:0: class=0x060400 card=0x59561002 chip=0x597c1002 rev=0x00 >> hdr=0x01 >> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >> device = 'RD790 PCI to PCI bridge (PCIe gpp port C)' >> class = bridge >> subclass = PCI-PCI >> cap 01[50] = powerspec 3 supports D0 D3 current D0 >> cap 10[58] = PCI-Express 2 root port max data 128(128) link x1(x1) >> cap 05[a0] = MSI supports 1 message >> cap 0d[b0] = PCI Bridge card=0x59561002 >> cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000 >> ecap 000b[100] = unknown 1 >> ecap 0002[110] = VC 1 max VC0 >> pcib5@pci0:0:7:0: class=0x060400 card=0x59561002 chip=0x597d1002 rev=0x00 >> hdr=0x01 >> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >> device = 'RD790 PCI to PCI bridge (PCIe gpp port D)' >> class = bridge >> subclass = PCI-PCI >> cap 01[50] = powerspec 3 supports D0 D3 current D0 >> cap 10[58] = PCI-Express 2 root port max data 128(128) link x1(x1) >> cap 05[a0] = MSI supports 1 message >> cap 0d[b0] = PCI Bridge card=0x59561002 >> cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000 >> ecap 000b[100] = unknown 1 >> ecap 0002[110] = VC 1 max VC0 >> pcib6@pci0:0:11:0: class=0x060400 card=0x59561002 chip=0x59801002 >> rev=0x00 >> hdr=0x01 >> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >> device = 'RD790 PCI to PCI bridge (external gfx1 port A)' >> class = bridge >> subclass = PCI-PCI >> cap 01[50] = powerspec 3 supports D0 D3 current D0 >> cap 10[58] = PCI-Express 2 root port max data 128(128) link x4(x8) >> cap 05[a0] = MSI supports 1 message >> cap 0d[b0] = PCI Bridge card=0x59561002 >> cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000 >> ecap 000b[100] = unknown 1 >> ecap 0002[110] = VC 1 max VC0 >> atapci4@pci0:0:18:0: class=0x01018f card=0x81ef1043 chip=0x43801002 >> rev=0x00 >> hdr=0x00 >> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >> device = 'IXP SB600 Serial ATA Controller' >> class = mass storage >> subclass = ATA >> bar [10] = type I/O Port, range 32, base 0x5000, size 8, enabled >> bar [14] = type I/O Port, range 32, base 0x4000, size 4, enabled >> bar [18] = type I/O Port, range 32, base 0x3000, size 8, enabled >> bar [1c] = type I/O Port, range 32, base 0x2000, size 4, enabled >> bar [20] = type I/O Port, range 32, base 0x1000, size 16, enabled >> bar [24] = type Memory, range 32, base 0xf71ff800, size 1024, enabled >> cap 01[60] = powerspec 2 supports D0 D3 current D0 >> ohci0@pci0:0:19:0: class=0x0c0310 card=0x82881043 chip=0x43871002 >> rev=0x00 >> hdr=0x00 >> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >> device = 'IXP SB600 USB Controller (OHCI0)' >> class = serial bus >> subclass = USB >> bar [10] = type Memory, range 32, base 0xf71fe000, size 4096, enabled >> ohci1@pci0:0:19:1: class=0x0c0310 card=0x82881043 chip=0x43881002 >> rev=0x00 >> hdr=0x00 >> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >> device = 'IXP SB600 USB Controller (OHCI1)' >> class = serial bus >> subclass = USB >> bar [10] = type Memory, range 32, base 0xf71fd000, size 4096, enabled >> ohci2@pci0:0:19:2: class=0x0c0310 card=0x82881043 chip=0x43891002 >> rev=0x00 >> hdr=0x00 >> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >> device = 'IXP SB600 USB Controller (OHCI2)' >> class = serial bus >> subclass = USB >> bar [10] = type Memory, range 32, base 0xf71fc000, size 4096, enabled >> ohci3@pci0:0:19:3: class=0x0c0310 card=0x82881043 chip=0x438a1002 >> rev=0x00 >> hdr=0x00 >> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >> device = 'IXP SB600 USB Controller (OHCI3)' >> class = serial bus >> subclass = USB >> bar [10] = type Memory, range 32, base 0xf71fb000, size 4096, enabled >> ohci4@pci0:0:19:4: class=0x0c0310 card=0x82881043 chip=0x438b1002 >> rev=0x00 >> hdr=0x00 >> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >> device = 'IXP SB600 USB Controller (OHCI4)' >> class = serial bus >> subclass = USB >> bar [10] = type Memory, range 32, base 0xf71fa000, size 4096, enabled >> ehci0@pci0:0:19:5: class=0x0c0320 card=0x82881043 chip=0x43861002 >> rev=0x00 >> hdr=0x00 >> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >> device = 'IXP SB600 USB Controller (EHCI)' >> class = serial bus >> subclass = USB >> bar [10] = type Memory, range 32, base 0xf71ff000, size 256, enabled >> cap 01[c0] = powerspec 2 supports D0 D1 D2 D3 current D0 >> cap 05[d0] = MSI supports 1 message >> cap 0a[e4] = EHCI Debug Port at offset 0xe0 in map 0x14 >> none0@pci0:0:20:0: class=0x0c0500 card=0x82881043 chip=0x43851002 >> rev=0x14 >> hdr=0x00 >> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >> device = 'ATI SMBus (ATI RD600/RS600)' >> class = serial bus >> subclass = SMBus >> bar [10] = type I/O Port, range 32, base 0xb00, size 16, enabled >> cap 08[b0] = HT MSI fixed address window disabled at 0xfee00000 >> atapci5@pci0:0:20:1: class=0x01018a card=0x82881043 chip=0x438c1002 >> rev=0x00 >> hdr=0x00 >> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >> device = 'ATI RD600/RS600 IDE Controller (RD600/RS600)' >> class = mass storage >> subclass = ATA >> bar [10] = type I/O Port, range 32, base 0x1f0, size 8, enabled >> bar [14] = type I/O Port, range 32, base 0x3f4, size 1, enabled >> bar [18] = type I/O Port, range 32, base 0x170, size 8, enabled >> bar [1c] = type I/O Port, range 32, base 0x374, size 1, enabled >> bar [20] = type I/O Port, range 32, base 0xff00, size 16, enabled >> none1@pci0:0:20:2: class=0x040300 card=0x82881043 chip=0x43831002 >> rev=0x00 >> hdr=0x00 >> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >> device = 'IXP SB600 High Definition Audio Controller' >> class = multimedia >> subclass = HDA >> bar [10] = type Memory, range 64, base 0xf71f4000, size 16384, >> enabled >> cap 01[50] = powerspec 2 supports D0 D3 current D0 >> isab0@pci0:0:20:3: class=0x060100 card=0x82881043 chip=0x438d1002 >> rev=0x00 >> hdr=0x00 >> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >> device = 'IXP SB600 PCI to LPC Bridge' >> class = bridge >> subclass = PCI-ISA >> pcib7@pci0:0:20:4: class=0x060401 card=0x00000000 chip=0x43841002 >> rev=0x00 >> hdr=0x01 >> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >> device = 'IXP SB600 PCI to PCI Bridge' >> class = bridge >> subclass = PCI-PCI >> hostb1@pci0:0:24:0: class=0x060000 card=0x00000000 chip=0x12001022 >> rev=0x00 >> hdr=0x00 >> vendor = 'Advanced Micro Devices (AMD)' >> device = '(Family 10h) Athlon64/Opteron/Sempron HyperTransport >> Technology Configuration' >> class = bridge >> subclass = HOST-PCI >> cap 08[80] = HT host >> hostb2@pci0:0:24:1: class=0x060000 card=0x00000000 chip=0x12011022 >> rev=0x00 >> hdr=0x00 >> vendor = 'Advanced Micro Devices (AMD)' >> device = '(Family 10h) Athlon64/Opteron/Sempron Address Map' >> class = bridge >> subclass = HOST-PCI >> hostb3@pci0:0:24:2: class=0x060000 card=0x00000000 chip=0x12021022 >> rev=0x00 >> hdr=0x00 >> vendor = 'Advanced Micro Devices (AMD)' >> device = '(Family 10h) Athlon64/Opteron/Sempron DRAM Controller' >> class = bridge >> subclass = HOST-PCI >> hostb4@pci0:0:24:3: class=0x060000 card=0x00000000 chip=0x12031022 >> rev=0x00 >> hdr=0x00 >> vendor = 'Advanced Micro Devices (AMD)' >> device = '(Family 10h) Athlon64/Opteron/Sempron Miscellaneous >> Control' >> class = bridge >> subclass = HOST-PCI >> cap 0f[f0] = unknown >> hostb5@pci0:0:24:4: class=0x060000 card=0x00000000 chip=0x12041022 >> rev=0x00 >> hdr=0x00 >> vendor = 'Advanced Micro Devices (AMD)' >> device = '(Family 10h) Athlon64/Opteron/Sempron Link Control' >> class = bridge >> subclass = HOST-PCI >> mpt0@pci0:1:0:0: class=0x010000 card=0xa58015d9 chip=0x00581000 rev=0x08 >> hdr=0x00 >> vendor = 'LSI Logic (Was: Symbios Logic, NCR)' >> device = 'SAS 3000 series, 8-port with 1068E -StorPort' >> class = mass storage >> subclass = SCSI >> bar [10] = type I/O Port, range 32, base 0x6000, size 256, disabled >> bar [14] = type Memory, range 64, base 0xf75fc000, size 16384, >> enabled >> bar [1c] = type Memory, range 64, base 0xf75e0000, size 65536, >> enabled >> cap 01[50] = powerspec 2 supports D0 D1 D2 D3 current D0 >> cap 10[68] = PCI-Express 1 endpoint max data 128(4096) link x4(x8) >> cap 05[98] = MSI supports 1 message, 64 bit >> cap 11[b0] = MSI-X supports 1 message in map 0x14 >> ecap 0001[100] = AER 1 1 fatal 1 non-fatal 0 corrected >> mpt1@pci0:2:0:0: class=0x010000 card=0xa58015d9 chip=0x00581000 rev=0x08 >> hdr=0x00 >> vendor = 'LSI Logic (Was: Symbios Logic, NCR)' >> device = 'SAS 3000 series, 8-port with 1068E -StorPort' >> class = mass storage >> subclass = SCSI >> bar [10] = type I/O Port, range 32, base 0x7000, size 256, disabled >> bar [14] = type Memory, range 64, base 0xf78fc000, size 16384, >> enabled >> bar [1c] = type Memory, range 64, base 0xf78e0000, size 65536, >> enabled >> cap 01[50] = powerspec 2 supports D0 D1 D2 D3 current D0 >> cap 10[68] = PCI-Express 1 endpoint max data 128(4096) link x4(x8) >> cap 05[98] = MSI supports 1 message, 64 bit >> cap 11[b0] = MSI-X supports 1 message in map 0x14 >> ecap 0001[100] = AER 1 1 fatal 1 non-fatal 0 corrected >> atapci0@pci0:3:0:0: class=0x01018f card=0x612111ab chip=0x612111ab >> rev=0xb1 >> hdr=0x00 >> vendor = 'Marvell Semiconductor (Was: Galileo Technology Ltd)' >> device = '6121 SATA2 Controller' >> class = mass storage >> subclass = ATA >> bar [10] = type I/O Port, range 32, base 0x9800, size 8, enabled >> bar [14] = type I/O Port, range 32, base 0x9400, size 4, enabled >> bar [18] = type I/O Port, range 32, base 0x9000, size 8, enabled >> bar [1c] = type I/O Port, range 32, base 0x8800, size 4, enabled >> bar [20] = type I/O Port, range 32, base 0x8400, size 16, enabled >> bar [24] = type Memory, range 32, base 0xf79ffc00, size 1024, enabled >> cap 01[48] = powerspec 2 supports D0 D1 D3 current D0 >> cap 05[50] = MSI supports 1 message >> cap 10[e0] = PCI-Express 1 legacy endpoint max data 128(128) link >> x1(x1) >> ecap 0001[100] = AER 1 0 fatal 0 non-fatal 2 corrected >> mskc0@pci0:4:0:0: class=0x020000 card=0x81f81043 chip=0x436411ab rev=0x12 >> hdr=0x00 >> vendor = 'Marvell Semiconductor (Was: Galileo Technology Ltd)' >> device = 'Yukon PCI-E Gigabit Ethernet Controller (88E8056)' >> class = network >> subclass = ethernet >> bar [10] = type Memory, range 64, base 0xf7afc000, size 16384, >> enabled >> bar [18] = type I/O Port, range 32, base 0xa800, size 256, enabled >> cap 01[48] = powerspec 3 supports D0 D1 D2 D3 current D0 >> cap 03[50] = VPD >> cap 05[5c] = MSI supports 1 message, 64 bit enabled with 1 message >> cap 10[e0] = PCI-Express 1 legacy endpoint max data 128(128) link >> x1(x1) >> ecap 0001[100] = AER 1 0 fatal 0 non-fatal 1 corrected >> atapci2@pci0:5:0:0: class=0x01018f card=0x612111ab chip=0x612111ab >> rev=0xb2 >> hdr=0x00 >> vendor = 'Marvell Semiconductor (Was: Galileo Technology Ltd)' >> device = '6121 SATA2 Controller' >> class = mass storage >> subclass = ATA >> bar [10] = type I/O Port, range 32, base 0xc800, size 8, enabled >> bar [14] = type I/O Port, range 32, base 0xc400, size 4, enabled >> bar [18] = type I/O Port, range 32, base 0xc000, size 8, enabled >> bar [1c] = type I/O Port, range 32, base 0xb800, size 4, enabled >> bar [20] = type I/O Port, range 32, base 0xb400, size 16, enabled >> bar [24] = type Memory, range 32, base 0xf7bffc00, size 1024, enabled >> cap 01[48] = powerspec 2 supports D0 D1 D3 current D0 >> cap 05[50] = MSI supports 1 message >> cap 10[e0] = PCI-Express 1 legacy endpoint max data 128(128) link >> x1(x1) >> ecap 0001[100] = AER 1 0 fatal 0 non-fatal 1 corrected >> mpt2@pci0:6:0:0: class=0x010000 card=0x30a01000 chip=0x00581000 rev=0x08 >> hdr=0x00 >> vendor = 'LSI Logic (Was: Symbios Logic, NCR)' >> device = 'SAS 3000 series, 8-port with 1068E -StorPort' >> class = mass storage >> subclass = SCSI >> bar [10] = type I/O Port, range 32, base 0xd000, size 256, disabled >> bar [14] = type Memory, range 64, base 0xf7ffc000, size 16384, >> enabled >> bar [1c] = type Memory, range 64, base 0xf7fe0000, size 65536, >> enabled >> cap 01[50] = powerspec 2 supports D0 D1 D2 D3 current D0 >> cap 10[68] = PCI-Express 1 endpoint max data 128(4096) link x4(x8) >> cap 05[98] = MSI supports 1 message, 64 bit >> cap 11[b0] = MSI-X supports 1 message in map 0x14 >> ecap 0001[100] = AER 1 1 fatal 1 non-fatal 0 corrected >> em0@pci0:7:5:0: class=0x020000 card=0x13768086 chip=0x107c8086 rev=0x05 >> hdr=0x00 >> vendor = 'Intel Corporation' >> device = 'Gigabit Ethernet Controller (Copper) rev 5 (82541PI)' >> class = network >> subclass = ethernet >> bar [10] = type Memory, range 32, base 0xfebe0000, size 131072, >> enabled >> bar [14] = type Memory, range 32, base 0xfebc0000, size 131072, >> enabled >> bar [18] = type I/O Port, range 32, base 0xe800, size 64, enabled >> cap 01[dc] = powerspec 2 supports D0 D3 current D0 >> cap 07[e4] = PCI-X supports 2048 burst read, 1 split transaction >> vgapci0@pci0:7:6:0: class=0x030000 card=0x00000000 chip=0x88115333 >> rev=0x44 >> hdr=0x00 >> vendor = 'S3 Graphics Co., Ltd' >> device = '86C732 Trio32, 86C764 Trio64, 86C765 Trio64V+ Rev 01' >> class = display >> subclass = VGA >> bar [10] = type Memory, range 32, base 0xf8000000, size 67108864, >> enabled >> none2@pci0:7:8:0: class=0x0c0010 card=0x82941043 chip=0x581111c1 rev=0x70 >> hdr=0x00 >> vendor = 'Lucent/Agere Systems (Was: AT&T MicroElectronics)' >> device = '1394A PCI PHY/Link Open Host Ctrlr I/F (FW322)' >> class = serial bus >> subclass = FireWire >> bar [10] = type Memory, range 32, base 0xfeb8f000, size 4096, enabled >> cap 01[44] = powerspec 2 supports D0 D1 D2 D3 current D0 >> >> >> >> > # vmstat -i >> > >> >> interrupt total rate >> irq9: acpi0 1 0 >> irq16: atapci0+ 2 0 >> irq17: ohci1 ohci3 3 0 >> irq18: mpt0 ohci2+ 7066718 31 >> irq19: mpt1 atapci* 7798877 34 >> irq20: em0 11715792 51 >> irq22: atapci4 628883 2 >> cpu0: timer 455853831 1999 >> irq256: mskc0 97098730 425 >> cpu1: timer 455845190 1999 >> Total 1036008027 4544 >> >> >> >> > # sysctl -a | grep msi >> > >> >> hw.pci.honor_msi_blacklist: 1 >> hw.pci.enable_msix: 1 >> hw.pci.enable_msi: 1 >> >> >> >> > # dmesg >> > >> >> Copyright (c) 1992-2011 The FreeBSD Project. >> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 >> The Regents of the University of California. All rights reserved. >> FreeBSD is a registered trademark of The FreeBSD Foundation. >> FreeBSD 8.2-STABLE #17: Mon Jun 6 19:40:19 EDT 2011 >> root@foghornleghorn.res.openband.net: >> /usr/obj/usr/src/sys/FOGHORNLEGHORN >> amd64 >> Timecounter "i8254" frequency 1193182 Hz quality 0 >> CPU: AMD Phenom(tm) II X2 555 Processor (3209.77-MHz K8-class CPU) >> Origin = "AuthenticAMD" Id = 0x100f43 Family = 10 Model = 4 Stepping >> = >> 3 >> >> >> Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> >> Features2=0x802009<SSE3,MON,CX16,POPCNT> >> AMD >> >> Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!> >> AMD >> >> Features2=0x37ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT> >> TSC: P-state invariant >> real memory = 8589934592 (8192 MB) >> avail memory = 8257736704 (7875 MB) >> ACPI APIC Table: <092310 OEMAPIC > >> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs >> FreeBSD/SMP: 1 package(s) x 2 core(s) >> cpu0 (BSP): APIC ID: 0 >> cpu1 (AP): APIC ID: 1 >> ioapic0 <Version 2.1> irqs 0-23 on motherboard >> acpi0: <092310 OEMRSDT> on motherboard >> acpi0: [ITHREAD] >> acpi0: Power Button (fixed) >> acpi0: reservation of fee00000, 1000 (3) failed >> acpi0: reservation of ffb80000, 80000 (3) failed >> acpi0: reservation of fff00000, 100000 (3) failed >> acpi0: reservation of 0, a0000 (3) failed >> acpi0: reservation of 100000, dff00000 (3) failed >> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 >> acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 >> cpu0: <ACPI CPU> on acpi0 >> cpu1: <ACPI CPU> on acpi0 >> acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on >> acpi0 >> Timecounter "HPET" frequency 14318180 Hz quality 900 >> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 >> pci0: <ACPI PCI bus> on pcib0 >> pcib1: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci0 >> pci1: <ACPI PCI bus> on pcib1 >> mpt0: <LSILogic SAS/SATA Adapter> port 0x6000-0x60ff mem >> 0xf75fc000-0xf75fffff,0xf75e0000-0xf75effff irq 18 at device 0.0 on pci1 >> mpt0: [ITHREAD] >> mpt0: MPI Version=1.5.20.0 >> pcib2: <ACPI PCI-PCI bridge> irq 19 at device 3.0 on pci0 >> pci2: <ACPI PCI bus> on pcib2 >> mpt1: <LSILogic SAS/SATA Adapter> port 0x7000-0x70ff mem >> 0xf78fc000-0xf78fffff,0xf78e0000-0xf78effff irq 19 at device 0.0 on pci2 >> mpt1: [ITHREAD] >> mpt1: MPI Version=1.5.20.0 >> pcib3: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0 >> pci3: <ACPI PCI bus> on pcib3 >> atapci0: <Marvell 88SX6121 UDMA133 controller> port >> 0x9800-0x9807,0x9400-0x9403,0x9000-0x9007,0x8800-0x8803,0x8400-0x840f mem >> 0xf79ffc00-0xf79fffff irq 16 at device 0.0 on pci3 >> atapci0: [ITHREAD] >> atapci1: <AHCI SATA controller> on atapci0 >> atapci1: [ITHREAD] >> atapci1: AHCI v1.00 controller with 3 3Gbps ports, PM supported >> ata2: <ATA channel 0> on atapci1 >> ata2: [ITHREAD] >> ata3: <ATA channel 1> on atapci1 >> ata3: [ITHREAD] >> ata4: <ATA channel 0> on atapci0 >> ata4: [ITHREAD] >> pcib4: <ACPI PCI-PCI bridge> irq 18 at device 6.0 on pci0 >> pci4: <ACPI PCI bus> on pcib4 >> mskc0: <Marvell Yukon 88E8056 Gigabit Ethernet> port 0xa800-0xa8ff mem >> 0xf7afc000-0xf7afffff irq 18 at device 0.0 on pci4 >> msk0: <Marvell Technology Group Ltd. Yukon EC Ultra Id 0xb4 Rev 0x03> on >> mskc0 >> msk0: Ethernet address: 00:1f:c6:e9:f8:7c >> miibus0: <MII bus> on msk0 >> e1000phy0: <Marvell 88E1149 Gigabit PHY> PHY 0 on miibus0 >> e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, >> 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow >> mskc0: [ITHREAD] >> pcib5: <ACPI PCI-PCI bridge> irq 19 at device 7.0 on pci0 >> pci5: <ACPI PCI bus> on pcib5 >> atapci2: <Marvell 88SX6121 UDMA133 controller> port >> 0xc800-0xc807,0xc400-0xc403,0xc000-0xc007,0xb800-0xb803,0xb400-0xb40f mem >> 0xf7bffc00-0xf7bfffff irq 19 at device 0.0 on pci5 >> atapci2: [ITHREAD] >> atapci3: <AHCI SATA controller> on atapci2 >> atapci3: [ITHREAD] >> atapci3: AHCI v1.00 controller with 3 3Gbps ports, PM supported >> ata5: <ATA channel 0> on atapci3 >> ata5: [ITHREAD] >> ata6: <ATA channel 1> on atapci3 >> ata6: [ITHREAD] >> ata7: <ATA channel 0> on atapci2 >> ata7: [ITHREAD] >> pcib6: <ACPI PCI-PCI bridge> irq 19 at device 11.0 on pci0 >> pci6: <ACPI PCI bus> on pcib6 >> mpt2: <LSILogic SAS/SATA Adapter> port 0xd000-0xd0ff mem >> 0xf7ffc000-0xf7ffffff,0xf7fe0000-0xf7feffff irq 19 at device 0.0 on pci6 >> mpt2: [ITHREAD] >> mpt2: MPI Version=1.5.19.0 >> atapci4: <ATI IXP600 SATA300 controller> port >> 0x5000-0x5007,0x4000-0x4003,0x3000-0x3007,0x2000-0x2003,0x1000-0x100f mem >> 0xf71ff800-0xf71ffbff irq 22 at device 18.0 on pci0 >> atapci4: [ITHREAD] >> atapci4: AHCI v1.10 controller with 4 3Gbps ports, PM supported >> ata8: <ATA channel 0> on atapci4 >> ata8: port is not ready (timeout 0ms) tfd = 000001d0 >> ata8: software reset clear timeout >> ata8: [ITHREAD] >> ata9: <ATA channel 1> on atapci4 >> ata9: [ITHREAD] >> ata10: <ATA channel 2> on atapci4 >> ata10: [ITHREAD] >> ata11: <ATA channel 3> on atapci4 >> ata11: [ITHREAD] >> ohci0: <OHCI (generic) USB controller> mem 0xf71fe000-0xf71fefff irq 16 at >> device 19.0 on pci0 >> ohci0: [ITHREAD] >> usbus0: <OHCI (generic) USB controller> on ohci0 >> ohci1: <OHCI (generic) USB controller> mem 0xf71fd000-0xf71fdfff irq 17 at >> device 19.1 on pci0 >> ohci1: [ITHREAD] >> usbus1: <OHCI (generic) USB controller> on ohci1 >> ohci2: <OHCI (generic) USB controller> mem 0xf71fc000-0xf71fcfff irq 18 at >> device 19.2 on pci0 >> ohci2: [ITHREAD] >> usbus2: <OHCI (generic) USB controller> on ohci2 >> ohci3: <OHCI (generic) USB controller> mem 0xf71fb000-0xf71fbfff irq 17 at >> device 19.3 on pci0 >> ohci3: [ITHREAD] >> usbus3: <OHCI (generic) USB controller> on ohci3 >> ohci4: <OHCI (generic) USB controller> mem 0xf71fa000-0xf71fafff irq 18 at >> device 19.4 on pci0 >> ohci4: [ITHREAD] >> usbus4: <OHCI (generic) USB controller> on ohci4 >> ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf71ff000-0xf71ff0ff irq >> 19 >> at device 19.5 on pci0 >> ehci0: [ITHREAD] >> ehci0: AMD SB600/700 quirk applied >> usbus5: EHCI version 1.0 >> usbus5: <EHCI (generic) USB 2.0 controller> on ehci0 >> pci0: <serial bus, SMBus> at device 20.0 (no driver attached) >> atapci5: <ATI IXP600 UDMA133 controller> port >> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0 >> ata0: <ATA channel 0> on atapci5 >> ata0: [ITHREAD] >> pci0: <multimedia, HDA> at device 20.2 (no driver attached) >> isab0: <PCI-ISA bridge> at device 20.3 on pci0 >> isa0: <ISA bus> on isab0 >> pcib7: <ACPI PCI-PCI bridge> at device 20.4 on pci0 >> pci7: <ACPI PCI bus> on pcib7 >> em0: <Intel(R) PRO/1000 Legacy Network Connection 1.0.3> port >> 0xe800-0xe83f >> mem 0xfebe0000-0xfebfffff,0xfebc0000-0xfebdffff irq 20 at device 5.0 on >> pci7 >> em0: [FILTER] >> em0: Ethernet address: 00:1b:21:4e:e5:2e >> vgapci0: <VGA-compatible display> mem 0xf8000000-0xfbffffff at device 6.0 >> on >> pci7 >> pci7: <serial bus, FireWire> at device 8.0 (no driver attached) >> acpi_button0: <Power Button> on acpi0 >> atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 >> acpi_hpet1: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on >> acpi0 >> device_attach: acpi_hpet1 attach returned 12 >> uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 >> uart0: [FILTER] >> orm0: <ISA Option ROMs> at iomem >> 0xc0000-0xc7fff,0xc8000-0xc87ff,0xc8800-0xc97ff on isa0 >> sc0: <System console> at flags 0x100 on isa0 >> sc0: VGA <16 virtual consoles, flags=0x300> >> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 >> acpi_throttle0: <ACPI CPU Throttling> on cpu0 >> acpi_throttle0: CLK_VAL field overlaps THT_EN bit >> device_attach: acpi_throttle0 attach returned 6 >> hwpstate0: <Cool`n'Quiet 2.0> on cpu0 >> Timecounters tick every 1.000 msec >> usbus0: 12Mbps Full Speed USB v1.0 >> usbus1: 12Mbps Full Speed USB v1.0 >> usbus2: 12Mbps Full Speed USB v1.0 >> usbus3: 12Mbps Full Speed USB v1.0 >> usbus4: 12Mbps Full Speed USB v1.0 >> usbus5: 480Mbps High Speed USB v2.0 >> ugen0.1: <ATI> at usbus0 >> uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 >> ugen1.1: <ATI> at usbus1 >> uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 >> ugen2.1: <ATI> at usbus2 >> uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 >> ugen3.1: <ATI> at usbus3 >> uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 >> ugen4.1: <ATI> at usbus4 >> uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 >> ugen5.1: <ATI> at usbus5 >> uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5 >> ad16: 476940MB <Seagate ST3500641NS 3.AEP> at ata8-master UDMA100 SATA >> 3Gb/s >> uhub0: 2 ports with 2 removable, self powered >> uhub1: 2 ports with 2 removable, self powered >> uhub2: 2 ports with 2 removable, self powered >> uhub3: 2 ports with 2 removable, self powered >> uhub4: 2 ports with 2 removable, self powered >> da8 at mpt0 bus 0 scbus0 target 0 lun 0 >> da8: <ATA ST31000528AS CC38> Fixed Direct Access SCSI-5 device >> da8: 300.000MB/s transfers >> da8: Command Queueing enabled >> da8: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C) >> da9 at mpt0 bus 0 scbus0 target 1 lun 0 >> da9: <ATA Hitachi HDS72101 A39C> Fixed Direct Access SCSI-5 device >> da9: 300.000MB/s transfers >> da9: Command Queueing enabled >> da9: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C) >> da10 at mpt0 bus 0 scbus0 target 2 lun 0 >> da10: <ATA SAMSUNG HD103SJ 00E4> Fixed Direct Access SCSI-5 device >> da10: 300.000MB/s transfers >> da10: Command Queueing enabled >> da10: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C) >> da11 at mpt0 bus 0 scbus0 target 3 lun 0 >> da11: <ATA SAMSUNG HD103SJ 00E4> Fixed Direct Access SCSI-5 device >> da11: 300.000MB/s transfers >> da11: Command Queueing enabled >> da11: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C) >> da12 at mpt0 bus 0 scbus0 target 4 lun 0 >> da12: <ATA SAMSUNG HD103SI 1118> Fixed Direct Access SCSI-5 device >> da12: 300.000MB/s transfers >> da12: Command Queueing enabled >> da12: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C) >> da13 at mpt0 bus 0 scbus0 target 5 lun 0 >> da13: <ATA SAMSUNG HD103SI 1118> Fixed Direct Access SCSI-5 device >> da13: 300.000MB/s transfers >> da13: Command Queueing enabled >> da13: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C) >> da14 at mpt0 bus 0 scbus0 target 6 lun 0 >> da14: <ATA Hitachi HDS72101 A39C> Fixed Direct Access SCSI-5 device >> da14: 300.000MB/s transfers >> da14: Command Queueing enabled >> da14: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C) >> da0 at mpt1 bus 0 scbus1 target 0 lun 0 >> da0: <ATA Hitachi HDS5C302 A580> Fixed Direct Access SCSI-5 device >> da0: 300.000MB/s transfers >> da0: Command Queueing enabled >> da0: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C) >> da1 at mpt1 bus 0 scbus1 target 1 lun 0 >> da1: <ATA Hitachi HDS5C302 A580> Fixed Direct Access SCSI-5 device >> da1: 300.000MB/s transfers >> da1: Command Queueing enabled >> da1: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C) >> da2 at mpt1 bus 0 scbus1 target 2 lun 0 >> da2: <ATA Hitachi HDS5C302 A580> Fixed Direct Access SCSI-5 device >> da2: 300.000MB/s transfers >> da2: Command Queueing enabled >> da2: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C) >> da3 at mpt1 bus 0 scbus1 target 3 lun 0 >> da3: <ATA Hitachi HDS5C302 A580> Fixed Direct Access SCSI-5 device >> da3: 300.000MB/s transfers >> da3: Command Queueing enabled >> da3: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C) >> da4 at mpt1 bus 0 scbus1 target 4 lun 0 >> da4: <ATA Hitachi HDS5C302 A580> Fixed Direct Access SCSI-5 device >> da4: 300.000MB/s transfers >> da4: Command Queueing enabled >> da4: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C) >> da5 at mpt1 bus 0 scbus1 target 5 lun 0 >> da5: <ATA SAMSUNG HD103SI 1118> Fixed Direct Access SCSI-5 device >> da5: 300.000MB/s transfers >> da5: Command Queueing enabled >> da5: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C) >> da6 at mpt1 bus 0 scbus1 target 6 lun 0 >> da6: <ATA ST31000340AS SD04> Fixed Direct Access SCSI-5 device >> da6: 300.000MB/s transfers >> da6: Command Queueing enabled >> da6: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C) >> da7 at mpt1 bus 0 scbus1 target 7 lun 0 >> da7: <ATA SAMSUNG HD103SI 1118> Fixed Direct Access SCSI-5 device >> da7: 300.000MB/s transfers >> da7: Command Queueing enabled >> da7: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C) >> SMP: AP CPU #1 Launched! >> uhub5: 10 ports with 10 removable, self powered >> GEOM: da7: geometry does not match label (16h,63s != 255h,63s). >> Trying to mount root from ufs:/dev/ad16s1a >> WARNING: / was not properly dismounted >> ZFS filesystem version 5 >> ZFS storage pool version 28 >> WARNING: /tmp was not properly dismounted >> WARNING: /usr was not properly dismounted >> WARNING: /var was not properly dismounted >> 0 >> mpt1: request 0xffffff80002c57f0:2369 timed out for ccb 0xffffff00063bb000 >> (req->ccb 0xffffff00063bb000) >> mpt1: attempting to abort req 0xffffff80002c57f0:2369 function 0 >> mpt1: mpt_wait_req(1) timed out >> mpt1: mpt_recover_commands: abort timed-out. Resetting controller >> mpt1: mpt_cam_event: 0x80 >> mpt1: mpt_cam_event: 0x80 >> mpt1: completing timedout/aborted req 0xffffff80002c57f0:2369 >> mpt1: mpt_cam_event: 0x16 >> mpt1: mpt_cam_event: 0x12 >> mpt1: mpt_cam_event: 0x12 >> mpt1: mpt_cam_event: 0x12 >> mpt1: mpt_cam_event: 0x12 >> mpt1: mpt_cam_event: 0x12 >> mpt1: mpt_cam_event: 0x12 >> mpt1: mpt_cam_event: 0x12 >> mpt1: mpt_cam_event: 0x12 >> mpt1: mpt_cam_event: 0x16 >> mpt1: request 0xffffff80002c5c70:2375 timed out for ccb 0xffffff00063bb000 >> (req->ccb 0xffffff00063bb000) >> mpt1: attempting to abort req 0xffffff80002c5c70:2375 function 0 >> mpt1: completing timedout/aborted req 0xffffff80002c5c70:2375 >> mpt1: >> abort of req 0xffffff80002c5c70:0 completed >> mpt1: mpt_cam_event: 0x16 >> mpt1: mpt_cam_event: 0x16 >> mpt1: request 0xffffff80002c5fd0:2379 timed out for ccb 0xffffff00063bb000 >> (req->ccb 0xffffff00063bb000) >> mpt1: attempting to abort req 0xffffff80002c5fd0:2379 function 0 >> mpt1: completing timedout/aborted req 0xffffff80002c5fd0:2379 >> mpt1: >> abort of req 0xffffff80002c5fd0:0 completed >> mpt1: mpt_cam_event: 0x16 >> mpt1: mpt_cam_event: 0x16 >> mpt1: request 0xffffff80002c6210:2383 timed out for ccb 0xffffff00063bb000 >> (req->ccb 0xffffff00063bb000) >> mpt1: attempting to abort req 0xffffff80002c6210:2383 function 0 >> mpt1: completing timedout/aborted req 0xffffff80002c6210:2383 >> mpt1: >> abort of req 0xffffff80002c6210:0 completed >> mpt1: mpt_cam_event: 0x16 >> mpt1: mpt_cam_event: 0x16 >> mpt1: request 0xffffff80002c6180:2387 timed out for ccb 0xffffff00063bb000 >> (req->ccb 0xffffff00063bb000) >> mpt1: attempting to abort req 0xffffff80002c6180:2387 function 0 >> mpt1: completing timedout/aborted req 0xffffff80002c6180:2387 >> mpt1: >> abort of req 0xffffff80002c6180:0 completed >> mpt1: mpt_cam_event: 0x16 >> mpt1: mpt_cam_event: 0x16 >> mpt1: request 0xffffff80002c62a0:2391 timed out for ccb 0xffffff00063bb000 >> (req->ccb 0xffffff00063bb000) >> mpt1: attempting to abort req 0xffffff80002c62a0:2391 function 0 >> mpt1: completing timedout/aborted req 0xffffff80002c62a0:2391 >> mpt1: >> abort of req 0xffffff80002c62a0:0 completed >> mpt1: mpt_cam_event: 0x16 >> mpt1: mpt_cam_event: 0x16 >> mpt1: request 0xffffff80002c6720:2395 timed out for ccb 0xffffff00063bb000 >> (req->ccb 0xffffff00063bb000) >> mpt1: attempting to abort req 0xffffff80002c6720:2395 function 0 >> mpt1: completing timedout/aborted req 0xffffff80002c6720:2395 >> mpt1: >> abort of req 0xffffff80002c6720:0 completed >> mpt1: mpt_cam_event: 0x16 >> mpt1: mpt_cam_event: 0x16 >> mpt1: request 0xffffff80002c67b0:2399 timed out for ccb 0xffffff00063bb000 >> (req->ccb 0xffffff00063bb000) >> mpt1: attempting to abort req 0xffffff80002c67b0:2399 function 0 >> mpt1: completing timedout/aborted req 0xffffff80002c67b0:2399 >> mpt1: >> abort of req 0xffffff80002c67b0:0 completed >> mpt1: mpt_cam_event: 0x16 >> mpt1: mpt_cam_event: 0x16 >> mpt0: request 0xffffff80002a69e0:2082 timed out for ccb 0xffffff0006389800 >> (req->ccb 0xffffff0006389800) >> mpt0: attempting to abort req 0xffffff80002a69e0:2082 function 0 >> mpt0: completing timedout/aborted req 0xffffff80002a69e0:2082 >> mpt0: abort of req 0xffffff80002a69e0:0 completed >> mpt0: mpt_cam_event: 0x16 >> mpt0: mpt_cam_event: 0x16 >> mpt0: request 0xffffff80002a6c20:2086 timed out for ccb 0xffffff0006389800 >> (req->ccb 0xffffff0006389800) >> mpt0: attempting to abort req 0xffffff80002a6c20:2086 function 0 >> mpt0: completing timedout/aborted req 0xffffff80002a6c20:2086 >> mpt0: abort of req 0xffffff80002a6c20:0 completed >> mpt0: mpt_cam_event: 0x16 >> mpt0: mpt_cam_event: 0x16 >> mpt0: request 0xffffff80002a6cb0:2090 timed out for ccb 0xffffff0006389800 >> (req->ccb 0xffffff0006389800) >> mpt0: attempting to abort req 0xffffff80002a6cb0:2090 function 0 >> mpt0: completing timedout/aborted req 0xffffff80002a6cb0:2090 >> mpt0: abort of req 0xffffff80002a6cb0:0 completed >> mpt0: mpt_cam_event: 0x16 >> mpt0: mpt_cam_event: 0x16 >> mpt0: request 0xffffff80002a6b90:2094 timed out for ccb 0xffffff0006389800 >> (req->ccb 0xffffff0006389800) >> mpt0: attempting to abort req 0xffffff80002a6b90:2094 function 0 >> mpt0: completing timedout/aborted req 0xffffff80002a6b90:2094 >> mpt0: abort of req 0xffffff80002a6b90:0 completed >> mpt0: mpt_cam_event: 0x16 >> mpt0: mpt_cam_event: 0x16 >> tun0: link state changed to UP >> (da8:mpt0:0:0:0): READ(10). CDB: 28 0 3e e2 6f 56 0 0 1 0 >> (da8:mpt0:0:0:0): CAM status: SCSI Status Error >> (da8:mpt0:0:0:0): SCSI status: Check Condition >> (da8:mpt0:0:0:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or >> bus device reset occurred) >> (da11:mpt0:0:3:0): READ(10). CDB: 28 0 1a b6 92 0 0 0 80 0 >> (da11:mpt0:0:3:0): CAM status: SCSI Status Error >> (da11:mpt0:0:3:0): SCSI status: Check Condition >> (da11:mpt0:0:3:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, >> or >> bus device reset occurred) >> (da2:mpt1:0:2:0): READ(10). CDB: 28 0 76 7b de 0 0 0 80 0 >> (da2:mpt1:0:2:0): CAM status: SCSI Status Error >> (da2:mpt1:0:2:0): SCSI status: Check Condition >> (da2:mpt1:0:2:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or >> bus device reset occurred) >> (da10:mpt0:0:2:0): READ(10). CDB: 28 0 1a ff 67 80 0 0 80 0 >> (da10:mpt0:0:2:0): CAM status: SCSI Status Error >> (da10:mpt0:0:2:0): SCSI status: Check Condition >> (da10:mpt0:0:2:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, >> or >> bus device reset occurred) >> (da5:mpt1:0:5:0): READ(10). CDB: 28 0 1a ff 67 80 0 0 80 0 >> (da5:mpt1:0:5:0): CAM status: SCSI Status Error >> (da5:mpt1:0:5:0): SCSI status: Check Condition >> (da5:mpt1:0:5:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or >> bus device reset occurred) >> (da7:mpt1:0:7:0): READ(10). CDB: 28 0 40 d7 da 80 0 0 80 0 >> (da7:mpt1:0:7:0): CAM status: SCSI Status Error >> (da7:mpt1:0:7:0): SCSI status: Check Condition >> (da7:mpt1:0:7:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or >> bus device reset occurred) >> (da6:mpt1:0:6:0): READ(10). CDB: 28 0 40 d7 da 80 0 0 80 0 >> (da6:mpt1:0:6:0): CAM status: SCSI Status Error >> (da6:mpt1:0:6:0): SCSI status: Check Condition >> (da6:mpt1:0:6:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or >> bus device reset occurred) >> (da0:mpt1:0:0:0): READ(10). CDB: 28 0 76 91 87 e3 0 0 1 0 >> (da0:mpt1:0:0:0): CAM status: SCSI Status Error >> (da0:mpt1:0:0:0): SCSI status: Check Condition >> (da0:mpt1:0:0:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or >> bus device reset occurred) >> (da3:mpt1:0:3:0): READ(10). CDB: 28 0 76 69 1 1c 0 0 1 0 >> (da3:mpt1:0:3:0): CAM status: SCSI Status Error >> (da3:mpt1:0:3:0): SCSI status: Check Condition >> (da3:mpt1:0:3:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or >> bus device reset occurred) >> (da1:mpt1:0:1:0): READ(10). CDB: 28 0 76 69 1 1c 0 0 1 0 >> (da1:mpt1:0:1:0): CAM status: SCSI Status Error >> (da1:mpt1:0:1:0): SCSI status: Check Condition >> (da1:mpt1:0:1:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or >> bus device reset occurred) >> (da9:mpt0:0:1:0): READ(10). CDB: 28 0 1a b3 d7 0 0 0 80 0 >> (da9:mpt0:0:1:0): CAM status: SCSI Status Error >> (da9:mpt0:0:1:0): SCSI status: Check Condition >> (da9:mpt0:0:1:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or >> bus device reset occurred) >> (da4:mpt1:0:4:0): READ(10). CDB: 28 0 53 3c c6 0 0 0 80 0 >> (da4:mpt1:0:4:0): CAM status: SCSI Status Error >> (da4:mpt1:0:4:0): SCSI status: Check Condition >> (da4:mpt1:0:4:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or >> bus device reset occurred) >> >> >> >> > >> > -- >> > | Jeremy Chadwick jdc@parodius.com | >> > | Parodius Networking http://www.parodius.com/ | >> > | UNIX Systems Administrator Mountain View, CA, US | >> > | Making life hard for others since 1977. PGP 4BD6C0CB | >> > >> > >> >> >> -- >> Joshua Boyd >> _______________________________________________ >> freebsd-stable@freebsd.org mailing list >> http://lists.freebsd.org/mailman/listinfo/freebsd-stable >> To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org" >> > > -- Joshua Boyd
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?BANLkTi=UPCZms5-t5vgXoS7-ZK4VkXWy8w>