Date: Thu, 28 Jan 1999 10:58:48 -0500 (EST) From: zoonie <zoonie@myhouse.com> To: johan.granlund@solid.se Cc: stable@FreeBSD.ORG Subject: Re: exabyte 8200 & CAM Message-ID: <Pine.BSF.4.05.9901281055470.3194-100000@nak.myhouse.com> In-Reply-To: <C1256707.0055E738.00@mail.solid.se>
next in thread | previous in thread | raw e-mail | index | archive | help
ok, so basically i need to upgrade to 3.0-STABLE before the drive will work. i was wondering if that would work. do you know what version of the firmware you have installed on your tape drive? thanks.... On Thu, 28 Jan 1999 johan.granlund@solid.se wrote: > Hi > I got a Exabyte 8200 and had problems like you. It was fixed after > 3.0-RELEASE and is working fine now . > > /Johan > > > > > > zoonie <zoonie@myhouse.com> on 99-01-28 14:58:22 > > To: stable@FreeBSD.ORG > cc: (bcc: Johan Granlund/Solid AB) > Subject: exabyte 8200 & CAM > > > > > what's the current status of CAM and the exabyte 8200 tape drive? i got a > new disk drive for my workstation and i decided to install 3.0-RELEASE on > it only to find out that the tape drive will not work so i can't put my > data on the new drive. i looked through the mailing list archives and i > found out that it was a problem after wondering why the drive did not work > even though it was recognized (i know, i should have read the release > notes first). i can work around it by installing the old drive and > mounting the partitions with the data i need to copy it over, but i really > need to do backups of other machines. does it work in 3.0-STABLE? if CAM > still doesn't work with the 8200 i'll just have to install 2.2.8 and > wait....thanks..... > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-stable" in the body of the message > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-stable" in the body of the message > --------------------------------------------- The devil finds work for idle circuits to do. --------------------------------------------- zoonie at myhouse dot com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.05.9901281055470.3194-100000>