Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 23 Apr 2014 15:08:01 -0700
From:      Adrian Chadd <adrian@freebsd.org>
To:        "Sevan / Venture37" <venture37@gmail.com>
Cc:        "freebsd-wireless@freebsd.org" <freebsd-wireless@freebsd.org>
Subject:   Re: ath(4) fails to attach
Message-ID:  <CAJ-VmonT-S%2B_Qs5UhDCziArHJN5TUUyeqAvKUp76XS_hbUhy0w@mail.gmail.com>
In-Reply-To: <CA%2BU3Mf5C%2BKRYpiGuhnsDb5m80FJTrb=POfzUES8JfMbYLa=ooQ@mail.gmail.com>
References:  <4F8052EB.5090007@gmail.com> <CAJ-VmokYcwvrYDkEKuVFcgpC05g-GbUV=5eLC4MioqC4o3qy5g@mail.gmail.com> <4F806763.7040404@gmail.com> <4F8095D8.5020701@gmail.com> <CAJ-Vmo=x3_gmkuo0A0=UcQPs7Mo_46Z1CWGfWZHmy71N84mrEA@mail.gmail.com> <4F80A38C.3080602@gmail.com> <CAJ-VmomYZXcJZPhJx2H4_L5-hbU7B6kYe-HMNmxnYZkC94APPg@mail.gmail.com> <4F80A81C.2070602@gmail.com> <CAJ-Vmo=J_bdNcCHKGi1F=8LJ4gks-c4_2HknsFF3UXN6i-hokA@mail.gmail.com> <4F80A9B4.2000500@gmail.com> <4F80AEC3.2050602@gmail.com> <CAJ-Vmo=b7gq9rh43FQUVtU1bevi496bpu8GqDQs8DpJMZudZdw@mail.gmail.com> <4F80C5FC.70607@gmail.com> <4F81710E.2070402@gmail.com> <CAJ-VmonP0LYTbaWQpdXSppEMO=ipqzBfEDxHruMDz3AxNizbDg@mail.gmail.com> <4F85816B.2070206@gmail.com> <4F858413.4010505@gmail.com> <CAJ-Vmo=Wt-jCqjqoz-8%2BvDCGn_BkA%2BBMAQVCbrA9MdK5QBSn1g@mail.gmail.com> <4F8604C1.4090902@gmail.com> <CAJ-Vmo=a_es67uUEg_oQ-UUu%2BXwVgXKJpyYPAehysbbSj7f%2BEA@mail.gmail.com> <4F861C10.5020503@gmail.com> <CA%2BU3Mf5C%2BKRYpiGuhnsDb5m80FJTrb=POfzUES8JfMbYLa=ooQ@mail.gmail.com>

next in thread | previous in thread | raw e-mail | index | archive | help
It's failing the selftest (error 14 is ESELFTEST.)


-a


On 23 April 2014 15:04, Sevan / Venture37 <venture37@gmail.com> wrote:
> On 12 April 2012 01:04, Sevan / Venture37 <venture37@gmail.com> wrote:
>> On 11/04/2012 23:34, Adrian Chadd wrote:
>>>
>>> So it attaches fine with debugging enabled, but not with debugging
>>> disabled?
>>
>>
>> Nope, neither.
>
> Just over 2 years on
> Tried the ath(4) card again on a new snapshot freshly installed on my X61s
>
> unknown: Lazy allocation of 0x10000 bytes rid 0x10 type 3 at 0xd4000000
> cbb0: Opening memory:
> cbb0: Normal: 0xd4000000-0xd400ffff
> cardbus0: Expecting link target, got 0xff
> cbb0: Opening memory:
> pcib3: allocated memory range (0xd4000000-0xd400ffff) for rid 10 of pci0:6:0:0
> unknown: Lazy allocation of 0x10000 bytes rid 0x10 type 3 at 0xd4000000
> cbb0: Opening memory:
> cbb0: Normal: 0xd4000000-0xd400ffff
> cardbus0: Expecting link target, got 0xff
> cbb0: Opening memory:
> found-> vendor=0x168c, dev=0x0013, revid=0x01
> domain=0, bus=6, slot=0, func=0
> class=02-00-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0002, statreg=0x8210, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x0a (2500 ns), maxlat=0x1c (7000 ns)
> intpin=a, irq=16
> powerspec 2  supports D0 D3  current D0
> ath0: <Atheros 5212> irq 16 at device 0.0 on cardbus0
> pcib3: allocated memory range (0xd4000000-0xd400ffff) for rid 10 of ath0
> ath0: Lazy allocation of 0x10000 bytes rid 0x10 type 3 at 0xd4000000
> cbb0: Opening memory:
> cbb0: Normal: 0xd4000000-0xd400ffff
> ath0: unable to attach hardware; HAL status 14
> cbb0: Opening memory:
> device_attach: ath0 attach returned 6
>
> Verbose dmesg:
>
> Table 'FACP' at 0xbf6bd300
> Table 'SSDT' at 0xbf6bd4b4
> Table 'ECDT' at 0xbf6cba38
> Table 'TCPA' at 0xbf6cba8a
> Table 'APIC' at 0xbf6cbabc
> APIC: Found table at 0xbf6cbabc
> APIC: Using the MADT enumerator.
> MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
> SMP: Added CPU 0 (AP)
> MADT: Found CPU APIC ID 1 ACPI ID 1: enabled
> SMP: Added CPU 1 (AP)
> Copyright (c) 1992-2014 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 11.0-CURRENT #0 r264459: Mon Apr 14 18:10:10 UTC 2014
>     root@grind.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64
> FreeBSD clang version 3.4 (tags/RELEASE_34/final 197956) 20140216
> WARNING: WITNESS option enabled, expect reduced performance.
> Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff81e99000.
> Preloaded elf obj module "/boot/kernel/zfs.ko" at 0xffffffff81e99d90.
> Preloaded elf obj module "/boot/kernel/opensolaris.ko" at 0xffffffff81e9a5b8.
> Calibrating TSC clock ... TSC clock: 1596037768 Hz
> CPU: Intel(R) Core(TM)2 Duo CPU     L7500  @ 1.60GHz (1596.04-MHz K8-class CPU)
>   Origin="GenuineIntel"  Id=0x6fb  Family=0x6  Model=0xf  Stepping=11
>   Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>   Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
>   AMD Features=0x20100800<SYSCALL,NX,LM>
>   AMD Features2=0x1<LAHF>
>   TSC: P-state invariant, performance statistics
> real memory  = 8589934592 (8192 MB)
> Physical memory chunk(s):
> 0x0000000000010000 - 0x0000000000099fff, 565248 bytes (138 pages)
> 0x0000000000100000 - 0x00000000001fffff, 1048576 bytes (256 pages)
> 0x0000000001eca000 - 0x00000000bf6affff, 3179175936 bytes (776166 pages)
> 0x0000000100000000 - 0x000000022d671fff, 5056700416 bytes (1234546 pages)
> avail memory = 8183607296 (7804 MB)
> Event timer "LAPIC" quality 400
> ACPI APIC Table: <LENOVO TP-7V   >
> INTR: Adding local APIC 1 as a target
> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
> FreeBSD/SMP: 1 package(s) x 2 core(s)
>  cpu0 (BSP): APIC ID:  0
>  cpu1 (AP): APIC ID:  1
> APIC: CPU 0 has ACPI ID 0
> APIC: CPU 1 has ACPI ID 1
> x86bios:  IVT 0x000000-0x0004ff at 0xfffff80000000000
> x86bios: SSEG 0x098000-0x098fff at 0xfffffe01eb3ea000
> x86bios: EBDA 0x09d000-0x09ffff at 0xfffff8000009d000
> x86bios:  ROM 0x0a0000-0x0fefff at 0xfffff800000a0000
> ULE: setup cpu 0
> ULE: setup cpu 1
> ACPI: RSDP 0xf6950 00024 (v02 LENOVO)
> ACPI: XSDT 0xbf6bd1b7 0009C (v01 LENOVO TP-7V    00002220  LTP 00000000)
> ACPI: FACP 0xbf6bd300 000F4 (v03 LENOVO TP-7V    00002220 LNVO 00000001)
> ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe1Block:
> 0/32 (20130823/tbfadt-601)
> ACPI BIOS Warning (bug): Optional FADT field Gpe1Block has zero
> address or length: 0x000000000000102C/0x0 (20130823/tbfadt-630)
> ACPI: DSDT 0xbf6bd6db 0E35D (v01 LENOVO TP-7V    00002220 MSFT 03000000)
> ACPI: FACS 0xbf6e4000 00040
> ACPI: SSDT 0xbf6bd4b4 00227 (v01 LENOVO TP-7V    00002220 MSFT 03000000)
> ACPI: ECDT 0xbf6cba38 00052 (v01 LENOVO TP-7V    00002220 LNVO 00000001)
> ACPI: TCPA 0xbf6cba8a 00032 (v02 LENOVO TP-7V    00002220 LNVO 00000001)
> ACPI: APIC 0xbf6cbabc 00068 (v01 LENOVO TP-7V    00002220 LNVO 00000001)
> ACPI: MCFG 0xbf6cbb24 0003C (v01 LENOVO TP-7V    00002220 LNVO 00000001)
> ACPI: HPET 0xbf6cbb60 00038 (v01 LENOVO TP-7V    00002220 LNVO 00000001)
> ACPI: SLIC 0xbf6cbb98 00176 (v01 LENOVO TP-7V    00002220 SLIC 00000000)
> ACPI: SLAC 0xbf6cbdf0 00176 (v01 LENOVO TP-7V    00002220  LTP 00000000)
> ACPI: BOOT 0xbf6cbf66 00028 (v01 LENOVO TP-7V    00002220  LTP 00000001)
> ACPI: ASF! 0xbf6cbf8e 00072 (v16 LENOVO TP-7V    00002220 PTL  00000001)
> ACPI: SSDT 0xbf6e2697 0025F (v01 LENOVO TP-7V    00002220 INTL 20050513)
> ACPI: SSDT 0xbf6e28f6 000A6 (v01 LENOVO TP-7V    00002220 INTL 20050513)
> ACPI: SSDT 0xbf6e299c 004F7 (v01 LENOVO TP-7V    00002220 INTL 20050513)
> ACPI: SSDT 0xbf6e2e93 001D8 (v01 LENOVO TP-7V    00002220 INTL 20050513)
> MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000
> ioapic0: Changing APIC ID to 1
> ioapic0: Routing external 8259A's -> intpin 0
> MADT: Interrupt override: source 0, irq 2
> ioapic0: Routing IRQ 0 -> intpin 2
> MADT: Interrupt override: source 9, irq 9
> ioapic0: intpin 9 trigger: level
> lapic0: Routing NMI -> LINT1
> lapic0: LINT1 trigger: edge
> lapic0: LINT1 polarity: high
> lapic1: Routing NMI -> LINT1
> lapic1: LINT1 trigger: edge
> lapic1: LINT1 polarity: high
> ioapic0 <Version 2.0> irqs 0-23 on motherboard
> cpu0 BSP:
>      ID: 0x00000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
>   lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
>   timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
> snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
> feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5
> feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
> wlan: <802.11 Link Layer>
> Hardware, Intel IvyBridge+ RNG: RDRAND is not present
> Hardware, VIA Nehemiah Padlock RNG: VIA Padlock RNG not present
> nfslock: pseudo-device
> kbd: new array size 4
> kbd1 at kbdmux0
> mem: <memory>
> VESA: INT 0x10 vector 0xc000:0x0014
> VESA: information block
> 0000   56 45 53 41 00 03 00 01 00 99 01 00 00 00 40 00
> 0010   00 99 77 00 00 01 3d 01 00 99 4f 01 00 99 7d 01
> 0020   00 99 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 0030   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 0040   60 01 61 01 62 01 63 01 64 01 65 01 66 01 67 01
> 0050   68 01 69 01 6a 01 6b 01 6c 01 6d 01 6e 01 6f 01
> 0060   70 01 71 01 3c 01 4d 01 5c 01 3a 01 4b 01 5a 01
> 0070   07 01 1a 01 1b 01 05 01 17 01 18 01 12 01 14 01
> 0080   15 01 01 01 03 01 11 01 ff ff 00 00 00 00 00 00
> 0090   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00a0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00b0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00c0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00d0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00e0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00f0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 0100   49 6e 74 65 6c 28 72 29 47 4d 39 36 35 2f 50 4d
> 0110   39 36 35 2f 47 4c 39 36 30 20 47 72 61 70 68 69
> 0120   63 73 20 43 68 69 70 20 41 63 63 65 6c 65 72 61
> 0130   74 65 64 20 56 47 41 20 42 49 4f 53 00 49 6e 74
> 0140   65 6c 20 43 6f 72 70 6f 72 61 74 69 6f 6e 00 49
> 0150   6e 74 65 6c 28 72 29 47 4d 39 36 35 2f 50 4d 39
> 0160   36 35 2f 47 4c 39 36 30 20 47 72 61 70 68 69 63
> 0170   73 20 43 6f 6e 74 72 6f 6c 6c 65 72 00 48 61 72
> 0180   64 77 61 72 65 20 56 65 72 73 69 6f 6e 20 30 2e
> 0190   30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 01a0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 01b0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 01c0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 01d0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 01e0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 01f0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> VESA: 12 mode(s) found
> VESA: v3.0, 7616k memory, flags:0x1, mode table:0xfffffe01eb3ff040 (99000040)
> VESA: Intel(r)GM965/PM965/GL960 Graphics Chip Accelerated VGA BIOS
> VESA: Intel Corporation Intel(r)GM965/PM965/GL960 Graphics Controller
> Hardware Version 0.0
> io: <I/O>
> VMBUS: load
> null: <null device, zero device>
> Falling back to <Software, Yarrow> random adaptor
> random: <Software, Yarrow> initialized
> hptnr: R750/DC7280 controller driver v1.0
> hpt27xx: RocketRAID 27xx controller driver v1.1
> hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
> acpi0: <LENOVO TP-7V> on motherboard
> ACPI: All ACPI Tables successfully acquired
> PCIe: Memory Mapped configuration base @ 0xf0000000
> CPU0: local APIC error 0x40
> ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
> acpi_ec0: <Embedded Controller: GPE 0x12, ECDT> port 0x62,0x66 on acpi0
> acpi0: Power Button (fixed)
> acpi0: reservation of 0, a0000 (3) failed
> acpi0: reservation of 100000, bff00000 (3) failed
> cpu0: Processor \134_PR_.CPU0 (ACPI ID 0) -> APIC ID 0
> cpu0: <ACPI CPU> on acpi0
> ACPI: SSDT 0xbf6e1b32 00282 (v01  PmRef  Cpu0Ist 00000100 INTL 20050513)
> ACPI: Dynamic OEM Table Load:
> ACPI: SSDT 0 00282 (v01  PmRef  Cpu0Ist 00000100 INTL 20050513)
> ACPI: SSDT 0xbf6e1e39 0085E (v01  PmRef  Cpu0Cst 00000100 INTL 20050513)
> ACPI: Dynamic OEM Table Load:
> ACPI: SSDT 0 0085E (v01  PmRef  Cpu0Cst 00000100 INTL 20050513)
> cpu1: Processor \134_PR_.CPU1 (ACPI ID 1) -> APIC ID 1
> cpu1: <ACPI CPU> on acpi0
> ACPI: SSDT 0xbf6e1a6a 000C8 (v01  PmRef  Cpu1Ist 00000100 INTL 20050513)
> ACPI: Dynamic OEM Table Load:
> ACPI: SSDT 0 000C8 (v01  PmRef  Cpu1Ist 00000100 INTL 20050513)
> ACPI: SSDT 0xbf6e1db4 00085 (v01  PmRef  Cpu1Cst 00000100 INTL 20050513)
> ACPI: Dynamic OEM Table Load:
> ACPI: SSDT 0 00085 (v01  PmRef  Cpu1Cst 00000100 INTL 20050513)
> attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
> Timecounter "i8254" frequency 1193182 Hz quality 0
> ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 0 vector 49
> Event timer "i8254" frequency 1193182 Hz quality 100
> hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
> hpet0: vendor 0x8086, rev 0x1, 14318180Hz 64bit, 3 timers, legacy route
> hpet0:  t0: irqs 0x00f00000 (0), 64bit, periodic
> hpet0:  t1: irqs 0x00f00000 (0)
> hpet0:  t2: irqs 0x00f00800 (0)
> Timecounter "HPET" frequency 14318180 Hz quality 950
> ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 0 vector 50
> Event timer "HPET" frequency 14318180 Hz quality 450
> Event timer "HPET1" frequency 14318180 Hz quality 440
> Event timer "HPET2" frequency 14318180 Hz quality 440
> atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
> atrtc0: registered as a time-of-day clock (resolution 1000000us,
> adjustment 0.500000000s)
> ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 51
> Event timer "RTC" frequency 32768 Hz quality 0
> ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
> pci_link0:        Index  IRQ  Rtd  Ref  IRQs
>   Initial Probe       0   10   N     0  3 4 5 6 7 9 10 11
>   Validation          0   10   N     0  3 4 5 6 7 9 10 11
>   After Disable       0  255   N     0  3 4 5 6 7 9 10 11
> pci_link1:        Index  IRQ  Rtd  Ref  IRQs
>   Initial Probe       0   11   N     0  3 4 5 6 7 9 10 11
>   Validation          0   11   N     0  3 4 5 6 7 9 10 11
>   After Disable       0  255   N     0  3 4 5 6 7 9 10 11
> pci_link2:        Index  IRQ  Rtd  Ref  IRQs
>   Initial Probe       0   11   N     0  3 4 5 6 7 9 10 11
>   Validation          0   11   N     0  3 4 5 6 7 9 10 11
>   After Disable       0  255   N     0  3 4 5 6 7 9 10 11
> pci_link3:        Index  IRQ  Rtd  Ref  IRQs
>   Initial Probe       0   11   N     0  3 4 5 6 7 9 10 11
>   Validation          0   11   N     0  3 4 5 6 7 9 10 11
>   After Disable       0  255   N     0  3 4 5 6 7 9 10 11
> pci_link4:        Index  IRQ  Rtd  Ref  IRQs
>   Initial Probe       0   11   N     0  3 4 5 6 7 9 10 11
>   Validation          0   11   N     0  3 4 5 6 7 9 10 11
>   After Disable       0  255   N     0  3 4 5 6 7 9 10 11
> pci_link5:        Index  IRQ  Rtd  Ref  IRQs
>   Initial Probe       0   11   N     0  3 4 5 6 7 9 10 11
>   Validation          0   11   N     0  3 4 5 6 7 9 10 11
>   After Disable       0  255   N     0  3 4 5 6 7 9 10 11
> pci_link6:        Index  IRQ  Rtd  Ref  IRQs
>   Initial Probe       0   11   N     0  3 4 5 6 7 9 10 11
>   Validation          0   11   N     0  3 4 5 6 7 9 10 11
>   After Disable       0  255   N     0  3 4 5 6 7 9 10 11
> pci_link7:        Index  IRQ  Rtd  Ref  IRQs
>   Initial Probe       0   11   N     0  3 4 5 6 7 9 10 11
>   Validation          0   11   N     0  3 4 5 6 7 9 10 11
>   After Disable       0  255   N     0  3 4 5 6 7 9 10 11
> acpi_lid0: <Control Method Lid Switch> on acpi0
> acpi_button0: <Sleep Button> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pcib0: decoding 5 range 0-0xff
> pcib0: decoding 4 range 0-0xcf7
> pcib0: decoding 4 range 0xd00-0xffff
> pcib0: decoding 3 range 0xa0000-0xbffff
> pcib0: decoding 3 range 0xd0000-0xd3fff
> pcib0: decoding 3 range 0xd4000-0xd7fff
> pcib0: decoding 3 range 0xd8000-0xdbfff
> pcib0: decoding 3 range 0xdc000-0xdffff
> pcib0: decoding 3 range 0xc0000000-0xfebfffff
> pci0: <ACPI PCI bus> on pcib0
> pci0: domain=0, physical bus=0
> found-> vendor=0x8086, dev=0x2a00, revid=0x0c
> domain=0, bus=0, slot=0, func=0
> class=06-00-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x8086, dev=0x2a02, revid=0x0c
> domain=0, bus=0, slot=2, func=0
> class=03-00-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> intpin=a, irq=10
> powerspec 3  supports D0 D3  current D0
> MSI supports 1 message
> map[10]: type Memory, range 64, base 0xf8000000, size 20, enabled
> pcib0: allocated type 3 (0xf8000000-0xf80fffff) for rid 10 of pci0:0:2:0
> map[18]: type Prefetchable Memory, range 64, base 0xe0000000, size 28, enabled
> pcib0: allocated type 3 (0xe0000000-0xefffffff) for rid 18 of pci0:0:2:0
> map[20]: type I/O Port, range 32, base 0x1800, size  3, enabled
> pcib0: allocated type 4 (0x1800-0x1807) for rid 20 of pci0:0:2:0
> pcib0: matched entry for 0.2.INTA
> pcib0: slot 2 INTA hardwired to IRQ 16
> found-> vendor=0x8086, dev=0x2a03, revid=0x0c
> domain=0, bus=0, slot=2, func=1
> class=03-80-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> powerspec 3  supports D0 D3  current D0
> map[10]: type Memory, range 64, base 0xf8100000, size 20, enabled
> pcib0: allocated type 3 (0xf8100000-0xf81fffff) for rid 10 of pci0:0:2:1
> found-> vendor=0x8086, dev=0x1049, revid=0x03
> domain=0, bus=0, slot=25, func=0
> class=02-00-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> intpin=a, irq=11
> powerspec 2  supports D0 D3  current D0
> MSI supports 1 message, 64 bit
> map[10]: type Memory, range 32, base 0xf8200000, size 17, enabled
> pcib0: allocated type 3 (0xf8200000-0xf821ffff) for rid 10 of pci0:0:25:0
> map[14]: type Memory, range 32, base 0xf8225000, size 12, enabled
> pcib0: allocated type 3 (0xf8225000-0xf8225fff) for rid 14 of pci0:0:25:0
> map[18]: type I/O Port, range 32, base 0x1840, size  5, enabled
> pcib0: allocated type 4 (0x1840-0x185f) for rid 18 of pci0:0:25:0
> pcib0: matched entry for 0.25.INTA
> pcib0: slot 25 INTA hardwired to IRQ 20
> found-> vendor=0x8086, dev=0x2834, revid=0x03
> domain=0, bus=0, slot=26, func=0
> class=0c-03-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> intpin=a, irq=11
> map[20]: type I/O Port, range 32, base 0x1860, size  5, enabled
> pcib0: allocated type 4 (0x1860-0x187f) for rid 20 of pci0:0:26:0
> pcib0: matched entry for 0.26.INTA
> pcib0: slot 26 INTA hardwired to IRQ 20
> found-> vendor=0x8086, dev=0x2835, revid=0x03
> domain=0, bus=0, slot=26, func=1
> class=0c-03-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> intpin=b, irq=11
> map[20]: type I/O Port, range 32, base 0x1880, size  5, enabled
> pcib0: allocated type 4 (0x1880-0x189f) for rid 20 of pci0:0:26:1
> pcib0: matched entry for 0.26.INTB
> pcib0: slot 26 INTB hardwired to IRQ 21
> found-> vendor=0x8086, dev=0x283a, revid=0x03
> domain=0, bus=0, slot=26, func=7
> class=0c-03-20, hdrtype=0x00, mfdev=0
> cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> intpin=c, irq=11
> powerspec 2  supports D0 D3  current D0
> map[10]: type Memory, range 32, base 0xf8426c00, size 10, enabled
> pcib0: allocated type 3 (0xf8426c00-0xf8426fff) for rid 10 of pci0:0:26:7
> pcib0: matched entry for 0.26.INTC
> pcib0: slot 26 INTC hardwired to IRQ 22
> found-> vendor=0x8086, dev=0x284b, revid=0x03
> domain=0, bus=0, slot=27, func=0
> class=04-03-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0106, statreg=0x0010, cachelnsz=16 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> intpin=b, irq=11
> powerspec 2  supports D0 D3  current D0
> MSI supports 1 message, 64 bit
> map[10]: type Memory, range 64, base 0xf8220000, size 14, enabled
> pcib0: allocated type 3 (0xf8220000-0xf8223fff) for rid 10 of pci0:0:27:0
> pcib0: matched entry for 0.27.INTB
> pcib0: slot 27 INTB hardwired to IRQ 17
> found-> vendor=0x8086, dev=0x283f, revid=0x03
> domain=0, bus=0, slot=28, func=0
> class=06-04-00, hdrtype=0x01, mfdev=1
> cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
> intpin=a, irq=11
> powerspec 2  supports D0 D3  current D0
> MSI supports 1 message
> pcib0: matched entry for 0.28.INTA
> pcib0: slot 28 INTA hardwired to IRQ 20
> secbus=2, subbus=2
> found-> vendor=0x8086, dev=0x2841, revid=0x03
> domain=0, bus=0, slot=28, func=1
> class=06-04-00, hdrtype=0x01, mfdev=1
> cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
> intpin=b, irq=11
> powerspec 2  supports D0 D3  current D0
> MSI supports 1 message
> pcib0: matched entry for 0.28.INTB
> pcib0: slot 28 INTB hardwired to IRQ 21
> secbus=3, subbus=3
> found-> vendor=0x8086, dev=0x2830, revid=0x03
> domain=0, bus=0, slot=29, func=0
> class=0c-03-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> intpin=a, irq=10
> map[20]: type I/O Port, range 32, base 0x18a0, size  5, enabled
> pcib0: allocated type 4 (0x18a0-0x18bf) for rid 20 of pci0:0:29:0
> pcib0: matched entry for 0.29.INTA
> pcib0: slot 29 INTA hardwired to IRQ 16
> found-> vendor=0x8086, dev=0x2831, revid=0x03
> domain=0, bus=0, slot=29, func=1
> class=0c-03-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> intpin=b, irq=11
> map[20]: type I/O Port, range 32, base 0x18c0, size  5, enabled
> pcib0: allocated type 4 (0x18c0-0x18df) for rid 20 of pci0:0:29:1
> pcib0: matched entry for 0.29.INTB
> pcib0: slot 29 INTB hardwired to IRQ 17
> found-> vendor=0x8086, dev=0x2836, revid=0x03
> domain=0, bus=0, slot=29, func=7
> class=0c-03-20, hdrtype=0x00, mfdev=0
> cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> intpin=d, irq=11
> powerspec 2  supports D0 D3  current D0
> map[10]: type Memory, range 32, base 0xf8427000, size 10, enabled
> pcib0: allocated type 3 (0xf8427000-0xf84273ff) for rid 10 of pci0:0:29:7
> pcib0: matched entry for 0.29.INTD
> pcib0: slot 29 INTD hardwired to IRQ 19
> found-> vendor=0x8086, dev=0x2448, revid=0xf3
> domain=0, bus=0, slot=30, func=0
> class=06-04-01, hdrtype=0x01, mfdev=0
> cmdreg=0x0005, statreg=0x0010, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> secbus=5, subbus=8
> found-> vendor=0x8086, dev=0x2811, revid=0x03
> domain=0, bus=0, slot=31, func=0
> class=06-01-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x8086, dev=0x2850, revid=0x03
> domain=0, bus=0, slot=31, func=1
> class=01-01-8a, hdrtype=0x00, mfdev=0
> cmdreg=0x0005, statreg=0x0288, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> intpin=c, irq=255
> pcib0: allocated type 4 (0x1f0-0x1f7) for rid 10 of pci0:0:31:1
> pcib0: allocated type 4 (0x3f6-0x3f6) for rid 14 of pci0:0:31:1
> pcib0: allocated type 4 (0x170-0x177) for rid 18 of pci0:0:31:1
> pcib0: allocated type 4 (0x376-0x376) for rid 1c of pci0:0:31:1
> map[20]: type I/O Port, range 32, base 0x18e0, size  4, enabled
> pcib0: allocated type 4 (0x18e0-0x18ef) for rid 20 of pci0:0:31:1
> found-> vendor=0x8086, dev=0x2829, revid=0x03
> domain=0, bus=0, slot=31, func=2
> class=01-06-01, hdrtype=0x00, mfdev=0
> cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> intpin=b, irq=10
> powerspec 3  supports D0 D3  current D0
> MSI supports 4 messages
> map[10]: type I/O Port, range 32, base 0x1c30, size  3, enabled
> pcib0: allocated type 4 (0x1c30-0x1c37) for rid 10 of pci0:0:31:2
> map[14]: type I/O Port, range 32, base 0x1c24, size  2, enabled
> pcib0: allocated type 4 (0x1c24-0x1c27) for rid 14 of pci0:0:31:2
> map[18]: type I/O Port, range 32, base 0x1c28, size  3, enabled
> pcib0: allocated type 4 (0x1c28-0x1c2f) for rid 18 of pci0:0:31:2
> map[1c]: type I/O Port, range 32, base 0x1c20, size  2, enabled
> pcib0: allocated type 4 (0x1c20-0x1c23) for rid 1c of pci0:0:31:2
> map[20]: type I/O Port, range 32, base 0x1c00, size  5, enabled
> pcib0: allocated type 4 (0x1c00-0x1c1f) for rid 20 of pci0:0:31:2
> map[24]: type Memory, range 32, base 0xf8426000, size 11, enabled
> pcib0: allocated type 3 (0xf8426000-0xf84267ff) for rid 24 of pci0:0:31:2
> pcib0: matched entry for 0.31.INTB
> pcib0: slot 31 INTB hardwired to IRQ 16
> found-> vendor=0x8086, dev=0x283e, revid=0x03
> domain=0, bus=0, slot=31, func=3
> class=0c-05-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0103, statreg=0x0280, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> intpin=a, irq=11
> map[10]: type Memory, range 32, base 0xf8427400, size  8, enabled
> pcib0: allocated type 3 (0xf8427400-0xf84274ff) for rid 10 of pci0:0:31:3
> map[20]: type I/O Port, range 32, base 0x1c40, size  5, enabled
> pcib0: allocated type 4 (0x1c40-0x1c5f) for rid 20 of pci0:0:31:3
> pcib0: matched entry for 0.31.INTA
> pcib0: slot 31 INTA hardwired to IRQ 23
> vgapci0: <VGA-compatible display> port 0x1800-0x1807 mem
> 0xf8000000-0xf80fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on
> pci0
> agp0: <Intel GM965 SVGA controller> on vgapci0
> pcib0: allocated type 3 (0xc0000000-0xc0000fff) for rid 64 of agp0
> agp0: Allocated flush page phys 0xc0000000 virt 0xfffff800c0000000
> agp0: aperture size is 256M, detected 7676k stolen memory
> agp0: AGP_I965_PGTBL_CTL2: 00000000
> agp0: AGP_I855_GCC1: 0x30
> agp0: AGP_I965_MSAC: 0x00
> agp0: Mappable GTT entries: 65536
> agp0: Total GTT entries: 131072
> vgapci0: Boot video device
> vgapci1: <VGA-compatible display> mem 0xf8100000-0xf81fffff at device
> 2.1 on pci0
> em0: <Intel(R) PRO/1000 Network Connection 7.3.8> port 0x1840-0x185f
> mem 0xf8200000-0xf821ffff,0xf8225000-0xf8225fff irq 20 at device 25.0
> on pci0
> em0: attempting to allocate 1 MSI vectors (1 supported)
> msi: routing MSI IRQ 256 to local APIC 0 vector 52
> em0: using IRQ 256 for MSI
> em0: Using an MSI interrupt
> em0: bpf attached
> em0: Ethernet address: 00:1d:72:
> uhci0: <Intel 82801H (ICH8) USB controller USB-D> port 0x1860-0x187f
> irq 20 at device 26.0 on pci0
> usbus0 on uhci0
> uhci0: usbpf: Attached
> uhci1: <Intel 82801H (ICH8) USB controller USB-E> port 0x1880-0x189f
> irq 21 at device 26.1 on pci0
> ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 0 vector 53
> usbus1 on uhci1
> uhci1: usbpf: Attached
> ehci0: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> mem
> 0xf8426c00-0xf8426fff irq 22 at device 26.7 on pci0
> ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 0 vector 54
> usbus2: EHCI version 1.0
> usbus2 on ehci0
> ehci0: usbpf: Attached
> hdac0: <Intel 82801H HDA Controller> mem 0xf8220000-0xf8223fff irq 17
> at device 27.0 on pci0
> hdac0: PCI card vendor: 0x17aa, device: 0x20ac
> hdac0: HDA Driver Revision: 20120126_0002
> hdac0: Config options: on=0x00000000 off=0x00000000
> hdac0: attempting to allocate 1 MSI vectors (1 supported)
> msi: routing MSI IRQ 257 to local APIC 0 vector 55
> hdac0: using IRQ 257 for MSI
> hdac0: Caps: OSS 4, ISS 4, BSS 0, NSDO 1, 64bit, CORB 256, RIRB 256
> pcib1: <ACPI PCI-PCI bridge> irq 20 at device 28.0 on pci0
> pcib1: allocating non-ISA range 0x2000-0x20ff
> pcib0: allocated type 4 (0x2000-0x20ff) for rid 1c of pcib1
> pcib1: allocating non-ISA range 0x2400-0x24ff
> pcib0: allocated type 4 (0x2400-0x24ff) for rid 1c of pcib1
> pcib1: allocating non-ISA range 0x2800-0x28ff
> pcib0: allocated type 4 (0x2800-0x28ff) for rid 1c of pcib1
> pcib1: allocating non-ISA range 0x2c00-0x2cff
> pcib0: allocated type 4 (0x2c00-0x2cff) for rid 1c of pcib1
> pcib0: allocated type 3 (0xf4000000-0xf5ffffff) for rid 20 of pcib1
> pcib0: allocated type 3 (0xf8500000-0xf85fffff) for rid 24 of pcib1
> pcib1:   domain            0
> pcib1:   secondary bus     2
> pcib1:   subordinate bus   2
> pcib1:   I/O decode        0x2000-0x2fff
> pcib1:   memory decode     0xf4000000-0xf5ffffff
> pcib1:   prefetched decode 0xf8500000-0xf85fffff
> pcib1:   special decode    ISA
> pci2: <ACPI PCI bus> on pcib1
> pcib1: allocated bus range (2-2) for rid 0 of pci2
> pci2: domain=0, physical bus=2
> pcib2: <ACPI PCI-PCI bridge> irq 21 at device 28.1 on pci0
> pcib2: allocating non-ISA range 0x3000-0x30ff
> pcib0: allocated type 4 (0x3000-0x30ff) for rid 1c of pcib2
> pcib2: allocating non-ISA range 0x3400-0x34ff
> pcib0: allocated type 4 (0x3400-0x34ff) for rid 1c of pcib2
> pcib2: allocating non-ISA range 0x3800-0x38ff
> pcib0: allocated type 4 (0x3800-0x38ff) for rid 1c of pcib2
> pcib2: allocating non-ISA range 0x3c00-0x3cff
> pcib0: allocated type 4 (0x3c00-0x3cff) for rid 1c of pcib2
> pcib0: allocated type 3 (0xf6000000-0xf7ffffff) for rid 20 of pcib2
> pcib0: allocated type 3 (0xf8600000-0xf86fffff) for rid 24 of pcib2
> pcib2:   domain            0
> pcib2:   secondary bus     3
> pcib2:   subordinate bus   3
> pcib2:   I/O decode        0x3000-0x3fff
> pcib2:   memory decode     0xf6000000-0xf7ffffff
> pcib2:   prefetched decode 0xf8600000-0xf86fffff
> pcib2:   special decode    ISA
> pci3: <ACPI PCI bus> on pcib2
> pcib2: allocated bus range (3-3) for rid 0 of pci3
> pci3: domain=0, physical bus=3
> found-> vendor=0x1814, dev=0x0781, revid=0x00
> domain=0, bus=3, slot=0, func=0
> class=02-80-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> intpin=a, irq=11
> powerspec 3  supports D0 D3  current D0
> MSI supports 32 messages, 64 bit
> map[10]: type Memory, range 32, base 0xf7f00000, size 16, enabled
> pcib2: allocated memory range (0xf7f00000-0xf7f0ffff) for rid 10 of pci0:3:0:0
> pcib2: matched entry for 3.0.INTA
> pcib2: slot 0 INTA hardwired to IRQ 17
> ral0: <Ralink Technology RT2790> mem 0xf7f00000-0xf7f0ffff irq 17 at
> device 0.0 on pci3
> ral0: attempting to allocate 1 MSI vectors (32 supported)
> msi: routing MSI IRQ 258 to local APIC 0 vector 56
> ral0: using IRQ 258 for MSI
> ral0: MAC/BBP RT2872 (rev 0x0200), RF RT2720 (MIMO 1T2R), address 00:15:af:
> ral0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
> ral0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps
> 24Mbps 36Mbps 48Mbps 54Mbps
> uhci2: <Intel 82801H (ICH8) USB controller USB-A> port 0x18a0-0x18bf
> irq 16 at device 29.0 on pci0
> ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 57
> usbus3 on uhci2
> uhci2: usbpf: Attached
> uhci3: <Intel 82801H (ICH8) USB controller USB-B> port 0x18c0-0x18df
> irq 17 at device 29.1 on pci0
> ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 0 vector 58
> usbus4 on uhci3
> uhci3: usbpf: Attached
> ehci1: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> mem
> 0xf8427000-0xf84273ff irq 19 at device 29.7 on pci0
> ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 59
> usbus5: EHCI version 1.0
> usbus5 on ehci1
> ehci1: usbpf: Attached
> pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pcib0: allocated type 4 (0x4000-0x7fff) for rid 1c of pcib3
> pcib0: allocated type 3 (0xd4000000-0xd7efffff) for rid 20 of pcib3
> pcib0: allocated type 3 (0xd8000000-0xdbffffff) for rid 24 of pcib3
> pcib3:   domain            0
> pcib3:   secondary bus     5
> pcib3:   subordinate bus   8
> pcib3:   I/O decode        0x4000-0x7fff
> pcib3:   memory decode     0xd4000000-0xd7efffff
> pcib3:   prefetched decode 0xd8000000-0xdbffffff
> pcib3:   special decode    subtractive
> pci5: <ACPI PCI bus> on pcib3
> pcib3: allocated bus range (5-5) for rid 0 of pci5
> pci5: domain=0, physical bus=5
> found-> vendor=0x1180, dev=0x0476, revid=0xba
> domain=0, bus=5, slot=0, func=0
> class=06-07-00, hdrtype=0x02, mfdev=1
> cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
> lattimer=0x20 (960 ns), mingnt=0x80 (32000 ns), maxlat=0x07 (1750 ns)
> intpin=a, irq=10
> powerspec 2  supports D0 D1 D2 D3  current D0
> map[10]: type Memory, range 32, base 0xd7eff000, size 12, enabled
> pcib3: allocated memory range (0xd7eff000-0xd7efffff) for rid 10 of pci0:5:0:0
> pcib3: matched entry for 5.0.INTA
> pcib3: slot 0 INTA hardwired to IRQ 16
> secbus=6, subbus=8
> pcib3: allocated bus range (6-8) for rid 0 of pci0:5:0:0
> found-> vendor=0x1180, dev=0x0822, revid=0x21
> domain=0, bus=5, slot=0, func=2
> class=08-05-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0006, statreg=0x0210, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> intpin=c, irq=11
> powerspec 2  supports D0 D1 D2 D3  current D0
> map[10]: type Memory, range 32, base 0xd7efec00, size  8, enabled
> pcib3: allocated memory range (0xd7efec00-0xd7efecff) for rid 10 of pci0:5:0:2
> pcib3: matched entry for 5.0.INTC
> pcib3: slot 0 INTC hardwired to IRQ 18
> cbb0: <RF5C476 PCI-CardBus Bridge> mem 0xd7eff000-0xd7efffff irq 16 at
> device 0.0 on pci5
> cardbus0: <CardBus bus> on cbb0
> cbb0: allocated bus range (6-6) for rid 0 of cardbus0
> pccard0: <16-bit PCCard bus> on cbb0
> cbb0: PCI Configuration space:
>   0x00: 0x04761180 0x02100007 0x060700ba 0x00822008
>   0x10: 0xd7eff000 0x020000dc 0xb0080605 0xfffff000
>   0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
>   0x30: 0x00000000 0xfffffffc 0x00000000 0x07000110
>   0x40: 0x20c617aa 0x00000001 0x00000000 0x00000000
>   0x50: 0x00000000 0x00000000 0x00000000 0x00000000
>   0x60: 0x00000000 0x00000000 0x00000000 0x00000000
>   0x70: 0x00000000 0x00000000 0x00000000 0x00000000
>   0x80: 0x04a00001 0x00000000 0x04630463 0x00000000
>   0x90: 0x00000000 0x00000000 0x00000000 0x00000000
>   0xa0: 0x00000000 0x09000000 0x00f00000 0x00000005
>   0xb0: 0x00000000 0xb6000000 0x00003000 0x00000000
>   0xc0: 0x20c617aa 0x00000000 0x00000000 0x00000000
>   0xd0: 0x00000000 0x00000000 0x00000000 0xfe0a0001
>   0xe0: 0x24c04000 0x00000000 0x00000000 0x00000000
>   0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
> sdhci_pci0: <RICOH R5C822 SD> mem 0xd7efec00-0xd7efecff irq 18 at
> device 0.2 on pci5
> sdhci_pci0-slot0: 33MHz HS 4bits 3.3V DMA
> sdhci_pci0-slot0: ============== REGISTER DUMP ==============
> sdhci_pci0-slot0: Sys addr: 0x00000000 | Version:  0x00000400
> sdhci_pci0-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
> sdhci_pci0-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
> sdhci_pci0-slot0: Present:  0x01f20000 | Host ctl: 0x00000000
> sdhci_pci0-slot0: Power:    0x00000000 | Blk gap:  0x00000000
> sdhci_pci0-slot0: Wake-up:  0x00000000 | Clock:    0x00000000
> sdhci_pci0-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
> sdhci_pci0-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00fb
> sdhci_pci0-slot0: AC12 err: 0x00000000 | Slot int: 0x00000000
> sdhci_pci0-slot0: Caps:     0x01e021a1 | Max curr: 0x00000040
> sdhci_pci0-slot0: ===========================================
> sdhci_pci0: 1 slot(s) allocated
> ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 60
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel ICH8M UDMA100 controller> port
> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x18e0-0x18ef at device 31.1 on
> pci0
> ata0: <ATA channel> at channel 0 on atapci0
> ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 61
> ahci0: <Intel ICH8M AHCI SATA controller> port
> 0x1c30-0x1c37,0x1c24-0x1c27,0x1c28-0x1c2f,0x1c20-0x1c23,0x1c00-0x1c1f
> mem 0xf8426000-0xf84267ff irq 16 at device 31.2 on pci0
> ahci0: attempting to allocate 4 MSI vectors (4 supported)
> msi: routing MSI IRQ 259 to local APIC 0 vector 64
> msi: routing MSI IRQ 260 to local APIC 0 vector 65
> msi: routing MSI IRQ 261 to local APIC 0 vector 66
> msi: routing MSI IRQ 262 to local APIC 0 vector 67
> ahci0: using IRQs 259-262 for MSI
> ahci0: AHCI v1.10 with 3 3Gbps ports, Port Multiplier not supported
> ahci0: Caps: 64bit NCQ SNTF ALP AL CLO 3Gbps PMD SSC PSC 32cmd CCC 3ports
> ahcich0: <AHCI channel> at channel 0 on ahci0
> ahcich0: Caps:
> ahcich1: not probed (disabled)
> ahcich2: not probed (disabled)
> pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
> acpi_tz0: <Thermal Zone> on acpi0
> acpi_tz1: <Thermal Zone> on acpi0
> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> atkbd: the current kbd controller command byte 0047
> atkbd: keyboard ID 0x54ab (2)
> kbd0 at atkbd0
> kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
> ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 62
> atkbd0: [GIANT-LOCKED]
> psm0: unable to allocate IRQ
> psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
> psm0: current command byte:0047
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 63
> psm0: [GIANT-LOCKED]
> psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
> psm0: config:00004000, flags:00000008, packet size:3
> psm0: syncmask:c0, syncbits:00
> battery0: <ACPI Control Method Battery> on acpi0
> acpi_acad0: <AC Adapter> on acpi0
> ACPI: Enabled 3 GPEs in block 00 to 1F
> acpi0: wakeup code va 0xfffffe0235249000 pa 0x94000
> ex_isa_identify()
> ahc_isa_identify 0: ioport 0xc00 alloc failed
> ahc_isa_identify 1: ioport 0x1c00 alloc failed
> ahc_isa_identify 2: ioport 0x2c00 alloc failed
> ahc_isa_identify 3: ioport 0x3c00 alloc failed
> ahc_isa_identify 4: ioport 0x4c00 alloc failed
> ahc_isa_identify 5: ioport 0x5c00 alloc failed
> ahc_isa_identify 6: ioport 0x6c00 alloc failed
> ahc_isa_identify 7: ioport 0x7c00 alloc failed
> ahc_isa_identify 8: ioport 0x8c00 alloc failed
> ahc_isa_identify 9: ioport 0x9c00 alloc failed
> ahc_isa_identify 10: ioport 0xac00 alloc failed
> ahc_isa_identify 11: ioport 0xbc00 alloc failed
> ahc_isa_identify 12: ioport 0xcc00 alloc failed
> ahc_isa_identify 13: ioport 0xdc00 alloc failed
> ahc_isa_identify 14: ioport 0xec00 alloc failed
> pcib0: allocated type 3 (0xa0000-0xa07ff) for rid 0 of orm0
> pcib0: allocated type 3 (0xa0800-0xa0fff) for rid 0 of orm0
> pcib0: allocated type 3 (0xa1000-0xa17ff) for rid 0 of orm0
> pcib0: allocated type 3 (0xa1800-0xa1fff) for rid 0 of orm0
> pcib0: allocated type 3 (0xa2000-0xa27ff) for rid 0 of orm0
> pcib0: allocated type 3 (0xa2800-0xa2fff) for rid 0 of orm0
> pcib0: allocated type 3 (0xa3000-0xa37ff) for rid 0 of orm0
> pcib0: allocated type 3 (0xa3800-0xa3fff) for rid 0 of orm0
> pcib0: allocated type 3 (0xa4000-0xa47ff) for rid 0 of orm0
> pcib0: allocated type 3 (0xa4800-0xa4fff) for rid 0 of orm0
> pcib0: allocated type 3 (0xa5000-0xa57ff) for rid 0 of orm0
> pcib0: allocated type 3 (0xa5800-0xa5fff) for rid 0 of orm0
> pcib0: allocated type 3 (0xa6000-0xa67ff) for rid 0 of orm0
> pcib0: allocated type 3 (0xa6800-0xa6fff) for rid 0 of orm0
> pcib0: allocated type 3 (0xa7000-0xa77ff) for rid 0 of orm0
> pcib0: allocated type 3 (0xa7800-0xa7fff) for rid 0 of orm0
> pcib0: allocated type 3 (0xa8000-0xa87ff) for rid 0 of orm0
> pcib0: allocated type 3 (0xa8800-0xa8fff) for rid 0 of orm0
> pcib0: allocated type 3 (0xa9000-0xa97ff) for rid 0 of orm0
> pcib0: allocated type 3 (0xa9800-0xa9fff) for rid 0 of orm0
> pcib0: allocated type 3 (0xaa000-0xaa7ff) for rid 0 of orm0
> pcib0: allocated type 3 (0xaa800-0xaafff) for rid 0 of orm0
> pcib0: allocated type 3 (0xab000-0xab7ff) for rid 0 of orm0
> pcib0: allocated type 3 (0xab800-0xabfff) for rid 0 of orm0
> pcib0: allocated type 3 (0xac000-0xac7ff) for rid 0 of orm0
> pcib0: allocated type 3 (0xac800-0xacfff) for rid 0 of orm0
> pcib0: allocated type 3 (0xad000-0xad7ff) for rid 0 of orm0
> pcib0: allocated type 3 (0xad800-0xadfff) for rid 0 of orm0
> pcib0: allocated type 3 (0xae000-0xae7ff) for rid 0 of orm0
> pcib0: allocated type 3 (0xae800-0xaefff) for rid 0 of orm0
> pcib0: allocated type 3 (0xaf000-0xaf7ff) for rid 0 of orm0
> pcib0: allocated type 3 (0xaf800-0xaffff) for rid 0 of orm0
> pcib0: allocated type 3 (0xb0000-0xb07ff) for rid 0 of orm0
> pcib0: allocated type 3 (0xb0800-0xb0fff) for rid 0 of orm0
> pcib0: allocated type 3 (0xb1000-0xb17ff) for rid 0 of orm0
> pcib0: allocated type 3 (0xb1800-0xb1fff) for rid 0 of orm0
> pcib0: allocated type 3 (0xb2000-0xb27ff) for rid 0 of orm0
> pcib0: allocated type 3 (0xb2800-0xb2fff) for rid 0 of orm0
> pcib0: allocated type 3 (0xb3000-0xb37ff) for rid 0 of orm0
> pcib0: allocated type 3 (0xb3800-0xb3fff) for rid 0 of orm0
> pcib0: allocated type 3 (0xb4000-0xb47ff) for rid 0 of orm0
> pcib0: allocated type 3 (0xb4800-0xb4fff) for rid 0 of orm0
> pcib0: allocated type 3 (0xb5000-0xb57ff) for rid 0 of orm0
> pcib0: allocated type 3 (0xb5800-0xb5fff) for rid 0 of orm0
> pcib0: allocated type 3 (0xb6000-0xb67ff) for rid 0 of orm0
> pcib0: allocated type 3 (0xb6800-0xb6fff) for rid 0 of orm0
> pcib0: allocated type 3 (0xb7000-0xb77ff) for rid 0 of orm0
> pcib0: allocated type 3 (0xb7800-0xb7fff) for rid 0 of orm0
> pcib0: allocated type 3 (0xb8000-0xb87ff) for rid 0 of orm0
> pcib0: allocated type 3 (0xb8800-0xb8fff) for rid 0 of orm0
> pcib0: allocated type 3 (0xb9000-0xb97ff) for rid 0 of orm0
> pcib0: allocated type 3 (0xb9800-0xb9fff) for rid 0 of orm0
> pcib0: allocated type 3 (0xba000-0xba7ff) for rid 0 of orm0
> pcib0: allocated type 3 (0xba800-0xbafff) for rid 0 of orm0
> pcib0: allocated type 3 (0xbb000-0xbb7ff) for rid 0 of orm0
> pcib0: allocated type 3 (0xbb800-0xbbfff) for rid 0 of orm0
> pcib0: allocated type 3 (0xbc000-0xbc7ff) for rid 0 of orm0
> pcib0: allocated type 3 (0xbc800-0xbcfff) for rid 0 of orm0
> pcib0: allocated type 3 (0xbd000-0xbd7ff) for rid 0 of orm0
> pcib0: allocated type 3 (0xbd800-0xbdfff) for rid 0 of orm0
> pcib0: allocated type 3 (0xbe000-0xbe7ff) for rid 0 of orm0
> pcib0: allocated type 3 (0xbe800-0xbefff) for rid 0 of orm0
> pcib0: allocated type 3 (0xbf000-0xbf7ff) for rid 0 of orm0
> pcib0: allocated type 3 (0xbf800-0xbffff) for rid 0 of orm0
> pcib0: allocated type 3 (0xd0000-0xd07ff) for rid 1 of orm0
> pcib0: allocated type 3 (0xd0800-0xd0fff) for rid 1 of orm0
> pcib0: allocated type 3 (0xd1000-0xd17ff) for rid 1 of orm0
> pcib0: allocated type 3 (0xd1800-0xd1fff) for rid 1 of orm0
> pcib0: allocated type 3 (0xd2000-0xd27ff) for rid 1 of orm0
> pcib0: allocated type 3 (0xd2800-0xd2fff) for rid 1 of orm0
> pcib0: allocated type 3 (0xd3000-0xd37ff) for rid 1 of orm0
> pcib0: allocated type 3 (0xd3800-0xd3fff) for rid 1 of orm0
> pcib0: allocated type 3 (0xd4000-0xd47ff) for rid 1 of orm0
> pcib0: allocated type 3 (0xd4800-0xd4fff) for rid 1 of orm0
> pcib0: allocated type 3 (0xd5000-0xd57ff) for rid 1 of orm0
> pcib0: allocated type 3 (0xd5800-0xd5fff) for rid 1 of orm0
> pcib0: allocated type 3 (0xd6000-0xd67ff) for rid 1 of orm0
> pcib0: allocated type 3 (0xd6800-0xd6fff) for rid 1 of orm0
> pcib0: allocated type 3 (0xd7000-0xd77ff) for rid 1 of orm0
> pcib0: allocated type 3 (0xd7800-0xd7fff) for rid 1 of orm0
> pcib0: allocated type 3 (0xd8000-0xd87ff) for rid 1 of orm0
> pcib0: allocated type 3 (0xd8800-0xd8fff) for rid 1 of orm0
> pcib0: allocated type 3 (0xd9000-0xd97ff) for rid 1 of orm0
> pcib0: allocated type 3 (0xd9800-0xd9fff) for rid 1 of orm0
> pcib0: allocated type 3 (0xda000-0xda7ff) for rid 1 of orm0
> pcib0: allocated type 3 (0xda800-0xdafff) for rid 1 of orm0
> pcib0: allocated type 3 (0xdb000-0xdb7ff) for rid 1 of orm0
> pcib0: allocated type 3 (0xdb800-0xdbfff) for rid 1 of orm0
> pcib0: allocated type 3 (0xdc000-0xdc7ff) for rid 1 of orm0
> pcib0: allocated type 3 (0xdc800-0xdcfff) for rid 1 of orm0
> pcib0: allocated type 3 (0xdd000-0xdd7ff) for rid 1 of orm0
> pcib0: allocated type 3 (0xdd800-0xddfff) for rid 1 of orm0
> pcib0: allocated type 3 (0xde000-0xde7ff) for rid 1 of orm0
> pcib0: allocated type 3 (0xde800-0xdefff) for rid 1 of orm0
> pcib0: allocated type 3 (0xdf000-0xdf7ff) for rid 1 of orm0
> pcib0: allocated type 3 (0xdf800-0xdffff) for rid 1 of orm0
> isa_probe_children: disabling PnP devices
> atkbdc: atkbdc0 already exists; skipping it
> atrtc: atrtc0 already exists; skipping it
> attimer: attimer0 already exists; skipping it
> sc: sc0 already exists; skipping it
> isa_probe_children: probing non-PnP devices
> orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xe0000-0xeffff on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> pcib0: allocated type 4 (0x3c0-0x3df) for rid 0 of vga0
> pcib0: allocated type 3 (0xa0000-0xbffff) for rid 0 of vga0
> pcib0: allocated type 4 (0x3f0-0x3f5) for rid 0 of fdc0
> pcib0: allocated type 4 (0x3f7-0x3f7) for rid 1 of fdc0
> fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
> ppc0: cannot reserve I/O port range
> ppc0 failed to probe at irq 7 on isa0
> pcib0: allocated type 4 (0x3f8-0x3ff) for rid 0 of uart0
> uart0 failed to probe at port 0x3f8-0x3ff irq 4 on isa0
> pcib0: allocated type 4 (0x2f8-0x2ff) for rid 0 of uart1
> uart1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
> wbwd0 failed to probe on isa0
> isa_probe_children: probing PnP devices
> est0: <Enhanced SpeedStep Frequency Control> on cpu0
> p4tcc0: <CPU Frequency Thermal Control> on cpu0
> est1: <Enhanced SpeedStep Frequency Control> on cpu1
> p4tcc1: <CPU Frequency Thermal Control> on cpu1
> Device configuration finished.
> procfs registered
> ZFS filesystem version: 5
> ZFS storage pool version: features support (5000)
> Timecounters tick every 1.000 msec
> vlan: initialized, using hash tables with chaining
> tcp_init: net.inet.tcp.tcbhashsize auto tuned to 65536
> lo0: bpf attached
> hptnr: no controller detected.
> hpt27xx: no controller detected.
> hptrr: no controller detected.
> hdac0: Command timeout on address 1
> hdac0: Command timeout on address 1
> hdac0: CODEC is not responding!
> hdacc0: <Analog Devices AD1984 HDA CODEC> at cad 0 on hdac0
> hdaa0: <Analog Devices AD1984 Audio Function Group> at nid 1 on hdacc0
> hdaa0: Subsystem ID: 0x17aa20d6
> hdaa0: NumGPIO=3 NumGPO=0 NumGPI=0 GPIWake=0 GPIUnsol=1
> hdaa0:  GPIO0: disabled
> hdaa0:  GPIO1: input state=0
> hdaa0:  GPIO2: disabled
> hdaa0: WARNING: nid=2 has cnid outside of the AFG range j=0 entnum=4
> index=0 res=0x00090801
> hdaa0: Original pins configuration:
> hdaa0: nid   0x    as seq device       conn  jack    loc        color   misc
> hdaa0: 17 0421401f 1  15 Headphones    Jack  1/8     Right      Green   0
> hdaa0: 18 90170110 1  0  Speaker       Fixed Analog  Internal   Unknown 1
> hdaa0: 19 511301f0 15 0  Speaker       None  ATAPI   0x11       Unknown 1
> hdaa0: 20 04a15021 2  1  Mic           Jack  1/8     Right      Red     0
> hdaa0: 21 90a7012e 2  14 Mic           Fixed Analog  Internal   Unknown 1
> hdaa0: 22 593301f0 15 0  CD            None  ATAPI   Onboard    Unknown 1
> hdaa0: 23 55a601f0 15 0  Mic           None  Digital 0x15       Unknown 1
> hdaa0: 24 55a601f0 15 0  Mic           None  Digital 0x15       Unknown 1
> hdaa0: 26 91f311f0 15 0  Other         Fixed ATAPI   0x11       Black   1
> hdaa0: 27 614411f0 15 0  SPDIF-out     None  RCA     Ext-Rear   Black   1
> hdaa0: 28 21a15020 2  0  Mic           Jack  1/8     Ext-Rear   Red     0
> hdaa0: Patching widget caps nid=26 0x00400000 -> 0x00700000
> hdaa0: Patched pins configuration:
> hdaa0: nid   0x    as seq device       conn  jack    loc        color   misc
> hdaa0: 17 0421401f 1  15 Headphones    Jack  1/8     Right      Green   0
> hdaa0: 18 90170110 1  0  Speaker       Fixed Analog  Internal   Unknown 1
> hdaa0: 19 511301f0 15 0  Speaker       None  ATAPI   0x11       Unknown 1 DISA
> hdaa0: 20 04a15021 2  1  Mic           Jack  1/8     Right      Red     0
> hdaa0: 21 90a7012e 2  14 Mic           Fixed Analog  Internal   Unknown 1
> hdaa0: 22 593301f0 15 0  CD            None  ATAPI   Onboard    Unknown 1 DISA
> hdaa0: 23 55a601f0 15 0  Mic           None  Digital 0x15       Unknown 1 DISA
> hdaa0: 24 55a601f0 15 0  Mic           None  Digital 0x15       Unknown 1 DISA
> hdaa0: 27 614411f0 15 0  SPDIF-out     None  RCA     Ext-Rear   Black   1 DISA
> hdaa0: 28 21a15020 2  0  Mic           Jack  1/8     Ext-Rear   Red     0
> hdaa0: 2 associations found:
> hdaa0: Association 0 (1) out:
> hdaa0:  Pin nid=18 seq=0
> hdaa0:  Pin nid=17 seq=15
> hdaa0: Association 1 (2) in:
> hdaa0:  Pin nid=28 seq=0
> hdaa0:  Pin nid=20 seq=1
> hdaa0:  Pin nid=21 seq=14
> hdaa0: Tracing association 0 (1)
> hdaa0:  Pin 18 traced to DAC 4
> hdaa0:  Pin 17 traced to DAC 4 and hpredir 0
> hdaa0: Association 0 (1) trace succeeded
> hdaa0: Tracing association 1 (2)
> hdaa0:  Unable to trace pin 28 to ADC 5, undo traces
> hdaa0:  Unable to trace pin 28 to ADC 6, undo traces
> hdaa0:  Pin 28 traced to ADC 8
> hdaa0:  Pin 20 traced to ADC 8
> hdaa0:  Pin 21 traced to ADC 8
> hdaa0: Association 1 (2) trace succeeded
> hdaa0: Looking for additional DAC for association 0 (1)
> hdaa0: Looking for additional ADC for association 1 (2)
> hdaa0:  ADC 9 considered equal to ADC 8
> hdaa0: Tracing input monitor
> hdaa0:  Tracing nid 32 to out
> hdaa0:  nid 32 is input monitor
> hdaa0: Tracing other input monitors
> hdaa0:  Tracing nid 20 to out
> hdaa0:  Tracing nid 21 to out
> hdaa0:  Tracing nid 28 to out
> hdaa0: Tracing beeper
> hdaa0: Headphones redirection for association 0 nid=17 using
> unsolicited responses.
> hdaa0: Redirect output to: main
> hdaa0: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref
> pcm0: <Analog Devices AD1984 (Analog 2.0+HP/2.0)> at nid 18,17 and
> 28,20,21 on hdaa0
> pcm0: Playback:
> pcm0:      Stream cap: 0x00000001 PCM
> pcm0:         PCM cap: 0x000e07ff 16 20 24 bits, 8 11 16 22 32 44 48
> 88 96 176 192 KHz
> pcm0:             DAC: 4
> pcm0:
> pcm0:     nid=18 [pin: Speaker (Fixed)]
> pcm0:       + <- nid=10 [audio mixer] [src: pcm, mix]
> pcm0:              + <- nid=4 [audio output] [src: pcm]
> pcm0:              + <- nid=33 [audio selector] [src: mix]
> pcm0:                     + <- nid=32 [audio mixer] [src: mix]
> pcm0:
> pcm0:     nid=17 [pin: Headphones (Green Jack)]
> pcm0:       + <- nid=7 [audio mixer] [src: pcm, mix]
> pcm0:              + <- nid=34 [audio selector] [src: pcm]
> pcm0:                     + <- nid=4 [audio output] [src: pcm]
> pcm0:              + <- nid=33 [audio selector] [src: mix]
> pcm0:                     + <- nid=32 [audio mixer] [src: mix]
> pcm0:
> pcm0: Record:
> pcm0:      Stream cap: 0x00000001 PCM
> pcm0:         PCM cap: 0x000e07ff 16 20 24 bits, 8 11 16 22 32 44 48
> 88 96 176 192 KHz
> pcm0:             ADC: 8
> pcm0:             ADC: 9
> pcm0:
> pcm0:     nid=8 [audio input]
> pcm0:       + <- nid=12 [audio selector] [src: line, mic, mix, monitor]
> pcm0:              + <- nid=20 [pin: Mic (Red Jack)] [src: mic]
> pcm0:              + <- nid=21 [pin: Mic (Fixed)] [src: monitor]
> pcm0:              + <- nid=32 [audio mixer] [src: mix]
> pcm0:              + <- nid=37 [audio selector] [src: line]
> pcm0:                     + <- nid=28 [pin: Mic (Red Jack)] [src: line]
> pcm0:
> pcm0:     nid=9 [audio input]
> pcm0:       + <- nid=13 [audio selector] [src: line, mic, mix, monitor]
> pcm0:              + <- nid=20 [pin: Mic (Red Jack)] [src: mic]
> pcm0:              + <- nid=21 [pin: Mic (Fixed)] [src: monitor]
> pcm0:              + <- nid=32 [audio mixer] [src: mix]
> pcm0:              + <- nid=37 [audio selector] [src: line]
> pcm0:                     + <- nid=28 [pin: Mic (Red Jack)] [src: line]
> pcm0:
> pcm0: Input Mix:
> pcm0:
> pcm0:     nid=32 [audio mixer]
> pcm0:       + <- nid=20 [pin: Mic (Red Jack)] [src: mic]
> pcm0:       + <- nid=21 [pin: Mic (Fixed)] [src: monitor]
> pcm0:       + <- nid=26 [beep widget] [src: speaker]
> pcm0:       + <- nid=37 [audio selector] [src: line]
> pcm0:              + <- nid=28 [pin: Mic (Red Jack)] [src: line]
> pcm0:
> pcm0: Master Volume (OSS: vol): -58/0dB
> pcm0:    +- ctl  2 (nid   4 out):    -58/0dB (40 steps)
> pcm0:    +- ctl  5 (nid   7 in   0): mute
> pcm0:    +- ctl  6 (nid   7 in   1): mute
> pcm0:    +- ctl  7 (nid  10 in   0): mute
> pcm0:    +- ctl  8 (nid  10 in   1): mute
> pcm0:    +- ctl 14 (nid  17 in ):    mute
> pcm0:    +- ctl 15 (nid  18 in ):    mute
> pcm0:
> pcm0: PCM Volume (OSS: pcm): -58/0dB
> pcm0:    +- ctl  2 (nid   4 out):    -58/0dB (40 steps)
> pcm0:    +- ctl  5 (nid   7 in   0): mute
> pcm0:    +- ctl  7 (nid  10 in   0): mute
> pcm0:
> pcm0: Microphone Volume (OSS: mic): 0/30dB
> pcm0:    +- ctl 11 (nid  12 out):    -58/22dB (55 steps) + mute
> pcm0:    +- ctl 12 (nid  13 out):    -58/22dB (55 steps) + mute
> pcm0:    +- ctl 17 (nid  20 out):    0/30dB (4 steps)
> pcm0:    +- ctl 24 (nid  32 in   0): -34/12dB (32 steps) + mute
> pcm0:
> pcm0: Microphone2 Volume (OSS: monitor): 0/30dB
> pcm0:    +- ctl 11 (nid  12 out):    -58/22dB (55 steps) + mute
> pcm0:    +- ctl 12 (nid  13 out):    -58/22dB (55 steps) + mute
> pcm0:    +- ctl 18 (nid  21 out):    0/30dB (4 steps)
> pcm0:    +- ctl 25 (nid  32 in   1): -34/12dB (32 steps) + mute
> pcm0:
> pcm0: Line-in Volume (OSS: line): 0/30dB
> pcm0:    +- ctl 11 (nid  12 out):    -58/22dB (55 steps) + mute
> pcm0:    +- ctl 12 (nid  13 out):    -58/22dB (55 steps) + mute
> pcm0:    +- ctl 28 (nid  32 in   4): -34/12dB (32 steps) + mute
> pcm0:    +- ctl 32 (nid  37 out):    0/30dB (4 steps)
> pcm0:
> pcm0: Speaker/Beep Volume (OSS: speaker): -34/0dB
> pcm0:    +- ctl 13 (nid  16 out):    -45/0dB (16 steps) + mute
> pcm0:    +- ctl 27 (nid  32 in   3): -34/12dB (32 steps) + mute
> pcm0:
> pcm0: Recording Level (OSS: rec): -58/22dB
> pcm0:    +- ctl 11 (nid  12 out):    -58/22dB (55 steps) + mute
> pcm0:    +- ctl 12 (nid  13 out):    -58/22dB (55 steps) + mute
> pcm0:
> pcm0: Input Mix Level (OSS: mix): -46/0dB
> pcm0:    +- ctl  6 (nid   7 in   1): mute
> pcm0:    +- ctl  8 (nid  10 in   1): mute
> pcm0:    +- ctl 11 (nid  12 out):    -58/22dB (55 steps) + mute
> pcm0:    +- ctl 12 (nid  13 out):    -58/22dB (55 steps) + mute
> pcm0:    +- ctl 29 (nid  33 out):    -46/0dB (32 steps) + mute
> pcm0:
> pcm0: Input Monitoring Level (OSS: igain): 0/0dB
> pcm0:    +- ctl  6 (nid   7 in   1): mute
> pcm0:    +- ctl  8 (nid  10 in   1): mute
> pcm0:
> pcm0: Mixer "vol":
> pcm0: Mixer "pcm":
> pcm0: Mixer "speaker":
> pcm0: Mixer "line":
> pcm0: Mixer "mic":
> pcm0: Mixer "mix":
> pcm0: Mixer "rec":
> pcm0: Mixer "igain":
> pcm0: Mixer "ogain":
> pcm0: Mixer "monitor":
> pcm0: Playback channel set is: Front Left, Front Right,
> pcm0: Playback channel matrix is: 2.0 (unknown)
> pcm0: Automatically set rec source to: monitor
> pcm0: Recording channel set is: Front Left, Front Right,
> pcm0: Recording channel matrix is: 2.0 (unknown)
> random: unblocking device.
> usbus0: 12Mbps Full Speed USB v1.0
> usbus1: 12Mbps Full Speed USB v1.0
> usbus2: 480Mbps High Speed USB v2.0
> usbus3: 12Mbps Full Speed USB v1.0
> usbus4: 12Mbps Full Speed USB v1.0
> usbus5: 480Mbps High Speed USB v2.0
> ata0: reset tp1 mask=03 ostat0=7f ostat1=7f
> ugen0.1: <Intel> at usbus0
> uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
> ugen3.1: <Intel> at usbus3
> uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
> ugen2.1: <Intel> at usbus2
> uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
> ugen1.1: <Intel> at usbus1
> uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
> ugen5.1: <Intel> at usbus5
> uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
> ugen4.1: <Intel> at usbus4
> uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
> ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
> ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
> ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
> ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
> uhub0: 2 ports with 2 removable, self powered
> uhub1: 2 ports with 2 removable, self powered
> uhub3: 2 ports with 2 removable, self powered
> uhub5: 2 ports with 2 removable, self powered
> ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
> pcib3: allocated memory range (0xd4000000-0xd400ffff) for rid 10 of pci0:6:0:0
> unknown: Lazy allocation of 0x10000 bytes rid 0x10 type 3 at 0xd4000000
> cbb0: Opening memory:
> cbb0: Normal: 0xd4000000-0xd400ffff
> cardbus0: Expecting link target, got 0xff
> cbb0: Opening memory:
> pcib3: allocated memory range (0xd4000000-0xd400ffff) for rid 10 of pci0:6:0:0
> unknown: Lazy allocation of 0x10000 bytes rid 0x10 type 3 at 0xd4000000
> cbb0: Opening memory:
> cbb0: Normal: 0xd4000000-0xd400ffff
> cardbus0: Expecting link target, got 0xff
> cbb0: Opening memory:
> found-> vendor=0x168c, dev=0x0013, revid=0x01
> domain=0, bus=6, slot=0, func=0
> class=02-00-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0002, statreg=0x8210, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x0a (2500 ns), maxlat=0x1c (7000 ns)
> intpin=a, irq=16
> powerspec 2  supports D0 D3  current D0
> ath0: <Atheros 5212> irq 16 at device 0.0 on cardbus0
> pcib3: allocated memory range (0xd4000000-0xd400ffff) for rid 10 of ath0
> ath0: Lazy allocation of 0x10000 bytes rid 0x10 type 3 at 0xd4000000
> cbb0: Opening memory:
> cbb0: Normal: 0xd4000000-0xd400ffff
> ath0: unable to attach hardware; HAL status 14
> cbb0: Opening memory:
> device_attach: ath0 attach returned 6
> ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
> ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
> ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
> ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
> ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
> ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
> ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
> ata0: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f
> ata0: reset tp2 stat0=ff stat1=ff devices=0x0
> ahcich0: AHCI reset...
> ahcich0: SATA connect time=100us status=00000123
> ahcich0: AHCI reset: device found
> battery0: battery initialization start
> acpi_acad0: acline initialization start
> battery0: battery initialization done, tried 1 times
> acpi_acad0: On Line
> acpi_acad0: acline initialization done, tried 1 times
> ahcich0: AHCI reset: device ready after 100ms
> pass0 at ahcich0 bus 0 scbus1 target 0 lun 0
> pass0: <OCZ-VERTEX2 1.37> ATA-8 SATA 2.x device
> pass0: Serial Number OCZ-0350VO37893A086L
> pass0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
> pass0: Command Queueing enabled
> ada0 at ahcich0 bus 0 scbus1 target 0 lun 0
> GEOM: new disk ada0
> ada0: <OCZ-VERTEX2 1.37> ATA-8 SATA 2.x device
> ada0: Serial Number OCZ-0350VO37893A086L
> ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
> ada0: Command Queueing enabled
> ada0: 114473MB (234441648 512 byte sectors: 16H 63S/T 16383C)
> ada0: quirks=0x1<4K>
> ada0: Previously was known as ad4
> Netvsc initializing... done!
> SMP: AP CPU #1 Launched!
> cpu1 AP:
>      ID: 0x01000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
>   lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
>   timer: 0x000100ef therm: 0x00010200 err: 0x000000f0 pmc: 0x00010400
> ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 1 vector 48
> ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 1 vector 49
> ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 1 vector 50
> ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 1 vector 51
> ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 1 vector 52
> msi: Assigning MSI IRQ 256 to local APIC 1 vector 53
> msi: Assigning MSI IRQ 258 to local APIC 1 vector 54
> TSC timecounter disabled: C3 enabled.
> Timecounter "TSC" frequency 1596037768 Hz quality -1000
> WARNING: WITNESS option enabled, expect reduced performance.
> Root mount waiting for: usbus5 usbus2
> uhub4: 4 ports with 4 removable, self powered
> uhub2: 4 ports with 4 removable, self powered
> Trying to mount root from zfs:zroot/ROOT/default []...
> start_init: trying /sbin/init
> ugen0.2: <STMicroelectronics> at usbus0



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAJ-VmonT-S%2B_Qs5UhDCziArHJN5TUUyeqAvKUp76XS_hbUhy0w>