Date: Tue, 31 Jan 2012 01:23:50 -0500 From: Super Bisquit <superbisquit@gmail.com> To: Justin Hibbits <chmeeedalf@gmail.com> Cc: FreeBSD PowerPC ML <freebsd-ppc@freebsd.org> Subject: Re: Has source been updated with Hibbits' recent patches? Message-ID: <CA%2BWntOv1kR04sO=m3%2B1m-H332NyZ7z4j-wTm=Fpsm-WJsNfffw@mail.gmail.com> In-Reply-To: <CA%2BWntOunorAPc_Cb%2Bza9nb2WnixMLkr6i8UmNmfoiUyZXSUOUg@mail.gmail.com> References: <CA%2BWntOuBdgcXow13BtfgVLfD3Bj0gT-WJ55X5HfUHoXxx7GD9Q@mail.gmail.com> <6B0E21DA-728B-43ED-8194-76D48A65B885@gmail.com> <CA%2BWntOt-MgYmuYjCgnbkUpyPmpWXgRM1UababbR8VabaYrP-Zw@mail.gmail.com> <CA%2BWntOvfJyXq2Ev%2BEAHS2GoiOX7qgpvfNb0uDW8WJ9TFvY9jNA@mail.gmail.com> <CAHSQbTC7amxv_4E8yj0LfTSXYGgdiyZ2hxv-hw3Fy3P_h5PNFA@mail.gmail.com> <CA%2BWntOvbyPUv58uC-Ycc6KjiBpo8_mzGz6inZdXi-SgsCq5mcA@mail.gmail.com> <CA%2BWntOsdQpTiAgFor4FVjYw4KjNVvyiatXPo8wg5bNs9%2BLZ6=g@mail.gmail.com> <B5EADFE9-4B4D-4338-B05A-A13560DA0226@gmail.com> <20120127061139.GA20497@FreeBSD.org> <CAHSQbTBhG=EKUqc4S9OknadrL_t3nZbro6gyL=o7joJ3y59MkA@mail.gmail.com> <CA%2BWntOu7rsU4yy6HX9Tf_0cio7ZfPiVC0PSKhe24%2Bem2V27Jig@mail.gmail.com> <CA%2BWntOunorAPc_Cb%2Bza9nb2WnixMLkr6i8UmNmfoiUyZXSUOUg@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
I've rebuilt the kernel with wi and et enabled along with wlan.
The miibus manual page mentions gem and the interface is listed as a route
that ukphy-miibus has to go through.
See the attached files.
The brightness patch isn't working for me either.
On Mon, Jan 30, 2012 at 11:11 AM, Super Bisquit <superbisquit@gmail.com>wrote:
> Okay,
> I rebuilt the kernel.
> Modules needed are miibus, if_et, cardbus, and pccard.
> Not working as of yet.
> I'll rebuild the kernel a second time.
>
> From the forth prompt, I typed,"setenv boot-device hd0,20"
> Is that the proper command?
>
>
> On Fri, Jan 27, 2012 at 4:53 PM, Super Bisquit <superbisquit@gmail.com>
> wrote:
> >
> > Here is some information that may help.
> > The linux firmware image is agere_sta_fw.bin.
> > Hardware identity is 0005:0001:0001:0002.
> > Station identity is 001f:0001:0008:0046.
> > Firmware is determined as Lucent/Agere 8.70.
> > I'll try the patch and tell you how it works.
> >
> >
> >
> > On 1/27/12, Justin Hibbits <chmeeedalf@gmail.com> wrote:
> > > 2012/1/27 Alexey Dokuchaev <danfe@freebsd.org>
> > >
> > >> On Thu, Jan 26, 2012 at 09:10:40PM -0500, Justin Hibbits wrote:
> > >> > Oh, I forgot, you need to manually build the if_wi module (go into /
> > >> > usr/src/sys/modules/wi and make), because it's not included in the
> > >> > modules Makefile for powerpc.
> > >>
> > >> If it works fine, why is it not enabled by default on ppc?
> > >>
> > >> ./danfe
> > >>
> > >
> > > I don't know if it works fine :) Plus, I forgot to enable it in my
> patch.
> > > Here's another patch that does enable it.
> > >
> > > Super, you can try the attached patch.
> > >
> > > - Justin
> > >
>
[-- Attachment #2 --]
Copyright (c) 1992-2011 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-CURRENT-201102 #2: Mon Jan 30 12:31:31 EST 2012
root@tima.tiza:/usr/obj/usr/src/sys/MYKERNEL powerpc
Preloaded elf kernel "/boot/kernel/kernel" at 0xa9c000.
cpu0: Motorola PowerPC 7455 revision 3.3, 800.22 MHz
cpu0: Features 9c000000<PPC32,ALTIVEC,FPU,MMU>
cpu0: L1 I-cache enabled, L1 D-cache enabled
cpu0: 256KB L2 cache, L3 cache disabled
cpu0: HID0 8450c0bc<EMCP,TBEN,NAP,DPM,ICE,DCE,SGE,BTIC,LRSTK,FOLD,BHT>
real memory = 790654976 (754 MB)
available KVA = 519380991 (495 MB)
Physical memory chunk(s):
0x00098000 - 0x000fffff, 425984 bytes (104 pages)
0x00c2b000 - 0x00ffffff, 4018176 bytes (981 pages)
0x01800000 - 0x017fffff, 0 bytes (0 pages)
0x01813000 - 0x01bfffff, 4116480 bytes (1005 pages)
0x01c3a000 - 0x2eb68fff, 754118656 bytes (184111 pages)
avail memory = 760041472 (724 MB)
ULE: setup cpu 0
wlan: mac acl policy registered
wlan: <802.11 Link Layer>
snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
firmware: 'isp_1040' version 1: 22944 bytes loaded at 0x6fc9c4
ispfw: registered firmware <isp_1040>
firmware: 'isp_1040_it' version 1: 32942 bytes loaded at 0x702364
ispfw: registered firmware <isp_1040_it>
firmware: 'isp_1080' version 1: 31350 bytes loaded at 0x70a412
ispfw: registered firmware <isp_1080>
firmware: 'isp_1080_it' version 1: 40644 bytes loaded at 0x711e88
ispfw: registered firmware <isp_1080_it>
firmware: 'isp_12160' version 1: 28050 bytes loaded at 0x71bd4c
ispfw: registered firmware <isp_12160>
firmware: 'isp_12160_it' version 1: 40604 bytes loaded at 0x722ade
ispfw: registered firmware <isp_12160_it>
firmware: 'isp_2100' version 1: 76770 bytes loaded at 0x72c97a
ispfw: registered firmware <isp_2100>
firmware: 'isp_2200' version 1: 77214 bytes loaded at 0x73f55c
ispfw: registered firmware <isp_2200>
firmware: 'isp_2300' version 1: 106640 bytes loaded at 0x7522fa
ispfw: registered firmware <isp_2300>
firmware: 'isp_2322' version 1: 120466 bytes loaded at 0x76c38a
ispfw: registered firmware <isp_2322>
firmware: 'isp_2400' version 1: 178924 bytes loaded at 0x78d584
ispfw: registered firmware <isp_2400>
firmware: 'isp_2400_multi' version 1: 195276 bytes loaded at 0x7c5fc8
ispfw: registered firmware <isp_2400_multi>
firmware: 'isp_2500' version 1: 141884 bytes loaded at 0x8034c4
ispfw: registered firmware <isp_2500>
firmware: 'isp_2500_multi' version 1: 166508 bytes loaded at 0x835018
ispfw: registered firmware <isp_2500_multi>
kbd0 at kbdmux0
mem: <memory>
nfslock: pseudo-device
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
openfirm: <Open Firmware control device>
nexus0: <Open Firmware Nexus device>
cpulist0: <Open Firmware CPU Group> on nexus0
cpu0: <Open Firmware CPU> on cpulist0
sc1: no video adapter found.
nexus0: <chosen>, type (unknown) (no driver attached)
sc1: no video adapter found.
nexus0: <memory>, type memory (no driver attached)
sc1: no video adapter found.
nexus0: <openprom>, type BootROM (no driver attached)
sc1: no video adapter found.
nexus0: <rom>, type (unknown) (no driver attached)
sc1: no video adapter found.
nexus0: <options>, type (unknown) (no driver attached)
sc1: no video adapter found.
nexus0: <aliases>, type (unknown) (no driver attached)
sc1: no video adapter found.
nexus0: <packages>, type (unknown) (no driver attached)
sc1: no video adapter found.
nexus0: <firewire-disk-mode>, type (unknown) (no driver attached)
sc1: no video adapter found.
nexus0: <pseudo-hid>, type (unknown) (no driver attached)
sc1: no video adapter found.
nexus0: <pseudo-sound>, type (unknown) (no driver attached)
sc1: no video adapter found.
nexus0: <multiboot>, type (unknown) (no driver attached)
sc1: no video adapter found.
nexus0: <diagnostics>, type (unknown) (no driver attached)
powermac_nvram0: <Apple NVRAM> on nexus0
powermac_nvram0: bank0 generation 384, bank1 generation 383
sc1: no video adapter found.
unin0: <Apple UniNorth System Controller> on nexus0
unin0: Version 192
iichb0: <Keywest I2C controller> mem 0xf8001000-0xf8001fff irq 42 on unin0
unin mapdev: start f8001000, len 4095
iichb0: Revision: A1
iicbus0: <OFW I2C bus> on iichb0
sc1: no video adapter found.
pcib0: <Apple UniNorth Host-PCI bridge> on nexus0
pci0: <OFW PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x106b, dev=0x0027, revid=0x00
domain=0, bus=0, slot=11, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0016, statreg=0x0230, cachelnsz=8 (dwords)
lattimer=0x10 (480 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x10de, dev=0x0110, revid=0xb2
domain=0, bus=0, slot=16, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0xf8 (7440 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns)
intpin=a, irq=0
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0x91000000, size 24, enabled
map[14]: type Prefetchable Memory, range 32, base 0x98000000, size 27, enabled
agp0: <Apple UniNorth AGP Bridge> on hostb0
agp0: allocating GATT for aperture of size 256M
vgapci0: <VGA-compatible display> mem 0x91000000-0x91ffffff,0x98000000-0x9fffffff irq 48 at device 16.0 on pci0
sc1: no video adapter found.
pcib1: <Apple UniNorth Host-PCI bridge> on nexus0
pci1: <OFW PCI bus> on pcib1
pci1: domain=1, physical bus=0
found-> vendor=0x106b, dev=0x0025, revid=0x00
domain=1, bus=0, slot=23, func=0
class=ff-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0016, statreg=0x0200, cachelnsz=8 (dwords)
lattimer=0x10 (480 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type Memory, range 32, base 0x80000000, size 19, enabled
found-> vendor=0x106b, dev=0x0026, revid=0x00
domain=1, bus=0, slot=24, func=0
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x10 (480 ns), mingnt=0x03 (750 ns), maxlat=0x56 (21500 ns)
intpin=a, irq=0
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0x80081000, size 12, enabled
found-> vendor=0x106b, dev=0x0026, revid=0x00
domain=1, bus=0, slot=25, func=0
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x10 (480 ns), mingnt=0x03 (750 ns), maxlat=0x56 (21500 ns)
intpin=a, irq=0
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0x80080000, size 12, enabled
found-> vendor=0x106b, dev=0x0028, revid=0x00
domain=1, bus=0, slot=11, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0016, statreg=0x2220, cachelnsz=8 (dwords)
lattimer=0x10 (480 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
macio0: <Pangea I/O Controller> mem 0x80000000-0x8007ffff at device 23.0 on pci1
openpic0: <OpenPIC Interrupt Controller> mem 0x40000-0x7ffff on macio0
openpic0: Version 1.2, supports 4 CPUs and 64 irqs
macgpio0: <MacIO GPIO Controller> mem 0x50-0x7f on macio0
pmuextint0: <Apple PMU99 External Interrupt> irq 47 on macgpio0
macgpio0: <programmer-switch, programmer-switch> irq 55 (no driver attached)
macgpio0: <extint-gpio3, extint-gpio3> irq 49 (no driver attached)
scc0: <Zilog Z8530 dual channel SCC> mem 0x13000-0x13fff,0x8400-0x84ff,0x8500-0x85ff,0x8600-0x86ff,0x8700-0x87ff irq 22,5,6,23,7,8 on macio0
scc0: resetting hardware
uart0: <z8530, channel A> on scc0
uart0: fast interrupt
uart1: <z8530, channel B> on scc0
uart1: fast interrupt
scc0: fast interrupt
pcm0: <Apple I2S Audio Controller> mem 0x10000-0x10fff,0x8000-0x80ff,0x8100-0x81ff irq 30,1,2 on macio0
pcm0: clone manager: deadline=750ms flags=0x8000001e
pcm0: sndbuf_setmap 18f0000, 10000; 0xdece1000 -> 18f0000
pmu0: <Apple PMU99 Controller> mem 0x16000-0x17fff irq 25 on macio0
pmu0: PMU child <rtc>
pmu0: PMU child <power-mgt>
pmu0: registered as a time-of-day clock (resolution 1000us, adjustment 0.000500000s)
macio0: <backlight, backlight> (no driver attached)
iichb1: <Keywest I2C controller> mem 0x18000-0x18fff irq 26 on macio0
iichb1: Revision: A1
iicbus1: <OFW I2C bus> on iichb1
tumbler0: <Texas Instruments TAS3001 Audio Codec> at addr 0x68 on iicbus1
ata0: <Apple MacIO Ultra ATA Controller> mem 0x1f000-0x1ffff,0x8a00-0x8aff irq 19,11 on macio0
ata0: reset tp1 mask=03 ostat0=50 ostat1=50
ata0: stat0=0x90 err=0x90 lsb=0x90 msb=0x90
ata0: stat0=0x90 err=0x90 lsb=0x90 msb=0x90
ata0: stat0=0x90 err=0x90 lsb=0x90 msb=0x90
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: reset tp2 stat0=50 stat1=00 devices=0x20001
macio0: <network, radio> mem 0x30000-0x300ff,0x1a000-0x1a0ff,0-0xff irq 57 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0x80081000-0x80081fff irq 27 at device 24.0 on pci1
uninorth mapdev: start 80081000, len 4096
usbus0: <OHCI (generic) USB controller> on ohci0
usbus0: bpf attached
ohci0: usbpf attached
ohci1: <OHCI (generic) USB controller> mem 0x80080000-0x80080fff irq 28 at device 25.0 on pci1
uninorth mapdev: start 80080000, len 4096
usbus1: <OHCI (generic) USB controller> on ohci1
usbus1: bpf attached
ohci1: usbpf attached
sc1: no video adapter found.
pcib2: <Apple UniNorth Host-PCI bridge> on nexus0
pci2: <OFW PCI bus> on pcib2
pci2: domain=2, physical bus=0
found-> vendor=0x106b, dev=0x0030, revid=0x00
domain=2, bus=0, slot=14, func=0
class=0c-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0016, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0x10 (480 ns), mingnt=0x0c (3000 ns), maxlat=0x18 (6000 ns)
intpin=a, irq=0
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xf5000000, size 12, enabled
found-> vendor=0x106b, dev=0x0024, revid=0x00
domain=2, bus=0, slot=15, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0016, statreg=0x84a0, cachelnsz=8 (dwords)
lattimer=0x10 (480 ns), mingnt=0x40 (16000 ns), maxlat=0x40 (16000 ns)
intpin=a, irq=0
map[10]: type Memory, range 32, base 0xf5200000, size 21, enabled
found-> vendor=0x106b, dev=0x0029, revid=0x00
domain=2, bus=0, slot=11, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0016, statreg=0x0220, cachelnsz=8 (dwords)
lattimer=0x10 (480 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
fwohci0: <Apple Pangea> mem 0xf5000000-0xf5000fff irq 40 at device 14.0 on pci2
uninorth mapdev: start f5000000, len 4096
fwohci0: OHCI version 1.0 (ROM=0)
fwohci0: No. of Isochronous channels is 8.
fwohci0: EUI64 00:0a:95:ff:fe:93:a8:20
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:0a:95:93:a8:20
fwe0: bpf attached
fwe0: Ethernet address: 02:0a:95:93:a8:20
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=2, CYCLEMASTER mode
gem0: <Apple Pangea GMAC Ethernet> mem 0xf5200000-0xf53fffff irq 41 at device 15.0 on pci2
uninorth mapdev: start f5200000, len 2097152
gem0: flags=0x4
miibus0: <MII bus> on gem0
ukphy0: <Generic IEEE 802.3u media interface> PHY 0 on miibus0
ukphy0: OUI 0x0004de, model 0x000e, rev. 2
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
gem0: 10kB RX FIFO, 4kB TX FIFO
gem0: bpf attached
gem0: Ethernet address: 00:0a:95:93:a8:20
sc0: <System console> on nexus0
sc0: Unknown <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: scteken (teken terminal)
procfs registered
Timecounter "timebase" frequency 24959250 Hz quality 0
Event timer "decrementer" frequency 24959250 Hz quality 1000
Timecounters tick every 1.000 msec
vlan: initialized, using hash tables with chaining
lo0: bpf attached
ata0: Identifying devices: 00020001
ata0: New devices: 00020001
firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
firewire0: bus manager 0
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
ugen0.1: <Apple> at usbus0
uhub0: <Apple OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Apple> at usbus1
uhub1: <Apple OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ata0-slave: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=80 wire
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
ad0: setting UDMA66
ad0: 57241MB <Seagate ST360015A 3.31> at ata0-master UDMA66
ad0: 117231408 sectors [116301C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad0
acd0: setting UDMA33
acd0: <TOSHIBA DVD-ROM SD-R1312/1A06> CDRW drive at ata0 as slave
acd0: read 5512KB/s (5512KB/s) write 5512KB/s (5512KB/s), 2048KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, test write, burnproof
acd0: Audio: play, 16 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
pcm0: Mixer "vol":
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
ugen0.2: <Mitsumi Electric> at usbus0
uhub2: <Mitsumi Electric Hub in Apple Extended USB Keyboard, class 9/0, rev 1.10/4.00, addr 2> on usbus0
uhub2: 3 ports with 2 removable, bus powered
ugen0.3: <Logitech> at usbus0
ums0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/54.00, addr 3> on usbus0
ums0: 8 buttons and [XYZT] coordinates ID=0
ugen0.4: <Mitsumi Electric> at usbus0
ukbd0: <Mitsumi Electric Apple Extended USB Keyboard, class 0/0, rev 1.10/4.00, addr 4> on usbus0
kbd: new array size 4
kbd1 at ukbd0
kbd1: ukbd0, generic (0), config:0x0, flags:0x3d0000
uhid0: <Mitsumi Electric Apple Extended USB Keyboard, class 0/0, rev 1.10/4.00, addr 4> on usbus0
(probe0:sbp0:0:0:0): Error 22, Unretryable error
(probe1:sbp0:0:1:0): Error 22, Unretryable error
(probe2:sbp0:0:2:0): Error 22, Unretryable error
(probe3:sbp0:0:3:0): Error 22, Unretryable error
(probe4:sbp0:0:4:0): Error 22, Unretryable error
(probe5:sbp0:0:5:0): Error 22, Unretryable error
(probe6:sbp0:0:6:0): Error 22, Unretryable error
Trying to mount root from ufs:/dev/ad0s3 [rw]...
start_init: trying /sbin/init
gem0: link state changed to DOWN
gem0: link state changed to UP
gem0: link state changed to DOWN
gem0: link state changed to UP
gem0: link state changed to DOWN
gem0: link state changed to UP
gem0: link state changed to DOWN
gem0: link state changed to UP
gem0: link state changed to DOWN
gem0: link state changed to UP
gem0: link state changed to DOWN
gem0: link state changed to UP
gem0: link state changed to DOWN
gem0: link state changed to UP
gem0: link state changed to DOWN
gem0: link state changed to UP
gem0: link state changed to DOWN
gem0: link state changed to UP
gem0: link state changed to DOWN
ifa_add_loopback_route: insertion failed
gem0: link state changed to UP
gem0: link state changed to DOWN
gem0: link state changed to UP
gem0: link state changed to DOWN
gem0: link state changed to UP
module_register: module et/miibus already exists!
Module et/miibus failed to register: 17
module_register: module pci/et already exists!
Module pci/et failed to register: 17
gem0: link state changed to DOWN
gem0: link state changed to UP
gem0: link state changed to DOWN
gem0: link state changed to UP
gem0: link state changed to DOWN
gem0: link state changed to UP
ifa_add_loopback_route: insertion failed
gem0: link state changed to DOWN
gem0: link state changed to UP
gem0: link state changed to DOWN
gem0: link state changed to UP
gem0: link state changed to DOWN
gem0: link state changed to UP
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...17 11 6 4 4 1 0 0 0 done
All buffers synced.
Copyright (c) 1992-2011 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-CURRENT-201102 #2: Mon Jan 30 12:31:31 EST 2012
root@tima.tiza:/usr/obj/usr/src/sys/MYKERNEL powerpc
Preloaded elf kernel "/boot/kernel/kernel" at 0xa9c000.
cpu0: Motorola PowerPC 7455 revision 3.3, 800.24 MHz
cpu0: Features 9c000000<PPC32,ALTIVEC,FPU,MMU>
cpu0: L1 I-cache enabled, L1 D-cache enabled
cpu0: 256KB L2 cache, L3 cache disabled
cpu0: HID0 8450c0bc<EMCP,TBEN,NAP,DPM,ICE,DCE,SGE,BTIC,LRSTK,FOLD,BHT>
real memory = 790654976 (754 MB)
available KVA = 519380991 (495 MB)
Physical memory chunk(s):
0x00098000 - 0x000fffff, 425984 bytes (104 pages)
0x00c2b000 - 0x00ffffff, 4018176 bytes (981 pages)
0x01800000 - 0x017fffff, 0 bytes (0 pages)
0x01813000 - 0x01bfffff, 4116480 bytes (1005 pages)
0x01c3a000 - 0x2eb68fff, 754118656 bytes (184111 pages)
avail memory = 760041472 (724 MB)
ULE: setup cpu 0
wlan: mac acl policy registered
wlan: <802.11 Link Layer>
snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
firmware: 'isp_1040' version 1: 22944 bytes loaded at 0x6fc9c4
ispfw: registered firmware <isp_1040>
firmware: 'isp_1040_it' version 1: 32942 bytes loaded at 0x702364
ispfw: registered firmware <isp_1040_it>
firmware: 'isp_1080' version 1: 31350 bytes loaded at 0x70a412
ispfw: registered firmware <isp_1080>
firmware: 'isp_1080_it' version 1: 40644 bytes loaded at 0x711e88
ispfw: registered firmware <isp_1080_it>
firmware: 'isp_12160' version 1: 28050 bytes loaded at 0x71bd4c
ispfw: registered firmware <isp_12160>
firmware: 'isp_12160_it' version 1: 40604 bytes loaded at 0x722ade
ispfw: registered firmware <isp_12160_it>
firmware: 'isp_2100' version 1: 76770 bytes loaded at 0x72c97a
ispfw: registered firmware <isp_2100>
firmware: 'isp_2200' version 1: 77214 bytes loaded at 0x73f55c
ispfw: registered firmware <isp_2200>
firmware: 'isp_2300' version 1: 106640 bytes loaded at 0x7522fa
ispfw: registered firmware <isp_2300>
firmware: 'isp_2322' version 1: 120466 bytes loaded at 0x76c38a
ispfw: registered firmware <isp_2322>
firmware: 'isp_2400' version 1: 178924 bytes loaded at 0x78d584
ispfw: registered firmware <isp_2400>
firmware: 'isp_2400_multi' version 1: 195276 bytes loaded at 0x7c5fc8
ispfw: registered firmware <isp_2400_multi>
firmware: 'isp_2500' version 1: 141884 bytes loaded at 0x8034c4
ispfw: registered firmware <isp_2500>
firmware: 'isp_2500_multi' version 1: 166508 bytes loaded at 0x835018
ispfw: registered firmware <isp_2500_multi>
kbd0 at kbdmux0
mem: <memory>
nfslock: pseudo-device
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
openfirm: <Open Firmware control device>
nexus0: <Open Firmware Nexus device>
cpulist0: <Open Firmware CPU Group> on nexus0
cpu0: <Open Firmware CPU> on cpulist0
sc1: no video adapter found.
nexus0: <chosen>, type (unknown) (no driver attached)
sc1: no video adapter found.
nexus0: <memory>, type memory (no driver attached)
sc1: no video adapter found.
nexus0: <openprom>, type BootROM (no driver attached)
sc1: no video adapter found.
nexus0: <rom>, type (unknown) (no driver attached)
sc1: no video adapter found.
nexus0: <options>, type (unknown) (no driver attached)
sc1: no video adapter found.
nexus0: <aliases>, type (unknown) (no driver attached)
sc1: no video adapter found.
nexus0: <packages>, type (unknown) (no driver attached)
sc1: no video adapter found.
nexus0: <firewire-disk-mode>, type (unknown) (no driver attached)
sc1: no video adapter found.
nexus0: <pseudo-hid>, type (unknown) (no driver attached)
sc1: no video adapter found.
nexus0: <pseudo-sound>, type (unknown) (no driver attached)
sc1: no video adapter found.
nexus0: <multiboot>, type (unknown) (no driver attached)
sc1: no video adapter found.
nexus0: <diagnostics>, type (unknown) (no driver attached)
powermac_nvram0: <Apple NVRAM> on nexus0
powermac_nvram0: bank0 generation 384, bank1 generation 383
sc1: no video adapter found.
unin0: <Apple UniNorth System Controller> on nexus0
unin0: Version 192
iichb0: <Keywest I2C controller> mem 0xf8001000-0xf8001fff irq 42 on unin0
unin mapdev: start f8001000, len 4095
iichb0: Revision: A1
iicbus0: <OFW I2C bus> on iichb0
sc1: no video adapter found.
pcib0: <Apple UniNorth Host-PCI bridge> on nexus0
pci0: <OFW PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x106b, dev=0x0027, revid=0x00
domain=0, bus=0, slot=11, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0016, statreg=0x0230, cachelnsz=8 (dwords)
lattimer=0x10 (480 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x10de, dev=0x0110, revid=0xb2
domain=0, bus=0, slot=16, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0xf8 (7440 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns)
intpin=a, irq=0
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0x91000000, size 24, enabled
map[14]: type Prefetchable Memory, range 32, base 0x98000000, size 27, enabled
agp0: <Apple UniNorth AGP Bridge> on hostb0
agp0: allocating GATT for aperture of size 256M
vgapci0: <VGA-compatible display> mem 0x91000000-0x91ffffff,0x98000000-0x9fffffff irq 48 at device 16.0 on pci0
sc1: no video adapter found.
pcib1: <Apple UniNorth Host-PCI bridge> on nexus0
pci1: <OFW PCI bus> on pcib1
pci1: domain=1, physical bus=0
found-> vendor=0x106b, dev=0x0025, revid=0x00
domain=1, bus=0, slot=23, func=0
class=ff-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0016, statreg=0x0200, cachelnsz=8 (dwords)
lattimer=0x10 (480 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type Memory, range 32, base 0x80000000, size 19, enabled
found-> vendor=0x106b, dev=0x0026, revid=0x00
domain=1, bus=0, slot=24, func=0
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x10 (480 ns), mingnt=0x03 (750 ns), maxlat=0x56 (21500 ns)
intpin=a, irq=0
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0x80081000, size 12, enabled
found-> vendor=0x106b, dev=0x0026, revid=0x00
domain=1, bus=0, slot=25, func=0
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x10 (480 ns), mingnt=0x03 (750 ns), maxlat=0x56 (21500 ns)
intpin=a, irq=0
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0x80080000, size 12, enabled
found-> vendor=0x106b, dev=0x0028, revid=0x00
domain=1, bus=0, slot=11, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0016, statreg=0x2220, cachelnsz=8 (dwords)
lattimer=0x10 (480 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
macio0: <Pangea I/O Controller> mem 0x80000000-0x8007ffff at device 23.0 on pci1
openpic0: <OpenPIC Interrupt Controller> mem 0x40000-0x7ffff on macio0
openpic0: Version 1.2, supports 4 CPUs and 64 irqs
macgpio0: <MacIO GPIO Controller> mem 0x50-0x7f on macio0
pmuextint0: <Apple PMU99 External Interrupt> irq 47 on macgpio0
macgpio0: <programmer-switch, programmer-switch> irq 55 (no driver attached)
macgpio0: <extint-gpio3, extint-gpio3> irq 49 (no driver attached)
scc0: <Zilog Z8530 dual channel SCC> mem 0x13000-0x13fff,0x8400-0x84ff,0x8500-0x85ff,0x8600-0x86ff,0x8700-0x87ff irq 22,5,6,23,7,8 on macio0
scc0: resetting hardware
uart0: <z8530, channel A> on scc0
uart0: fast interrupt
uart1: <z8530, channel B> on scc0
uart1: fast interrupt
scc0: fast interrupt
pcm0: <Apple I2S Audio Controller> mem 0x10000-0x10fff,0x8000-0x80ff,0x8100-0x81ff irq 30,1,2 on macio0
pcm0: clone manager: deadline=750ms flags=0x8000001e
pcm0: sndbuf_setmap 18f0000, 10000; 0xdece1000 -> 18f0000
pmu0: <Apple PMU99 Controller> mem 0x16000-0x17fff irq 25 on macio0
pmu0: PMU child <rtc>
pmu0: PMU child <power-mgt>
pmu0: registered as a time-of-day clock (resolution 1000us, adjustment 0.000500000s)
macio0: <backlight, backlight> (no driver attached)
iichb1: <Keywest I2C controller> mem 0x18000-0x18fff irq 26 on macio0
iichb1: Revision: A1
iicbus1: <OFW I2C bus> on iichb1
tumbler0: <Texas Instruments TAS3001 Audio Codec> at addr 0x68 on iicbus1
ata0: <Apple MacIO Ultra ATA Controller> mem 0x1f000-0x1ffff,0x8a00-0x8aff irq 19,11 on macio0
ata0: reset tp1 mask=03 ostat0=50 ostat1=50
ata0: stat0=0x90 err=0x90 lsb=0x90 msb=0x90
ata0: stat0=0x90 err=0x90 lsb=0x90 msb=0x90
ata0: stat0=0x90 err=0x90 lsb=0x90 msb=0x90
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: reset tp2 stat0=50 stat1=00 devices=0x20001
macio0: <network, radio> mem 0x30000-0x300ff,0x1a000-0x1a0ff,0-0xff irq 57 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0x80081000-0x80081fff irq 27 at device 24.0 on pci1
uninorth mapdev: start 80081000, len 4096
usbus0: <OHCI (generic) USB controller> on ohci0
usbus0: bpf attached
ohci0: usbpf attached
ohci1: <OHCI (generic) USB controller> mem 0x80080000-0x80080fff irq 28 at device 25.0 on pci1
uninorth mapdev: start 80080000, len 4096
usbus1: <OHCI (generic) USB controller> on ohci1
usbus1: bpf attached
ohci1: usbpf attached
sc1: no video adapter found.
pcib2: <Apple UniNorth Host-PCI bridge> on nexus0
pci2: <OFW PCI bus> on pcib2
pci2: domain=2, physical bus=0
found-> vendor=0x106b, dev=0x0030, revid=0x00
domain=2, bus=0, slot=14, func=0
class=0c-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0016, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0x10 (480 ns), mingnt=0x0c (3000 ns), maxlat=0x18 (6000 ns)
intpin=a, irq=0
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xf5000000, size 12, enabled
found-> vendor=0x106b, dev=0x0024, revid=0x00
domain=2, bus=0, slot=15, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0016, statreg=0x84a0, cachelnsz=8 (dwords)
lattimer=0x10 (480 ns), mingnt=0x40 (16000 ns), maxlat=0x40 (16000 ns)
intpin=a, irq=0
map[10]: type Memory, range 32, base 0xf5200000, size 21, enabled
found-> vendor=0x106b, dev=0x0029, revid=0x00
domain=2, bus=0, slot=11, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0016, statreg=0x0220, cachelnsz=8 (dwords)
lattimer=0x10 (480 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
fwohci0: <Apple Pangea> mem 0xf5000000-0xf5000fff irq 40 at device 14.0 on pci2
uninorth mapdev: start f5000000, len 4096
fwohci0: OHCI version 1.0 (ROM=0)
fwohci0: No. of Isochronous channels is 8.
fwohci0: EUI64 00:0a:95:ff:fe:93:a8:20
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:0a:95:93:a8:20
fwe0: bpf attached
fwe0: Ethernet address: 02:0a:95:93:a8:20
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=2, CYCLEMASTER mode
gem0: <Apple Pangea GMAC Ethernet> mem 0xf5200000-0xf53fffff irq 41 at device 15.0 on pci2
uninorth mapdev: start f5200000, len 2097152
gem0: flags=0x4
miibus0: <MII bus> on gem0
ukphy0: <Generic IEEE 802.3u media interface> PHY 0 on miibus0
ukphy0: OUI 0x0004de, model 0x000e, rev. 2
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
gem0: 10kB RX FIFO, 4kB TX FIFO
gem0: bpf attached
gem0: Ethernet address: 00:0a:95:93:a8:20
sc0: <System console> on nexus0
sc0: Unknown <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: scteken (teken terminal)
procfs registered
Timecounter "timebase" frequency 24959250 Hz quality 0
Event timer "decrementer" frequency 24959250 Hz quality 1000
Timecounters tick every 1.000 msec
vlan: initialized, using hash tables with chaining
lo0: bpf attached
ata0: Identifying devices: 00020001
ata0: New devices: 00020001
firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
firewire0: bus manager 0
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
ugen0.1: <Apple> at usbus0
uhub0: <Apple OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Apple> at usbus1
uhub1: <Apple OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ata0-slave: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=80 wire
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
ad0: setting UDMA66
ad0: 57241MB <Seagate ST360015A 3.31> at ata0-master UDMA66
ad0: 117231408 sectors [116301C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad0
acd0: setting UDMA33
acd0: <TOSHIBA DVD-ROM SD-R1312/1A06> CDRW drive at ata0 as slave
acd0: read 5512KB/s (5512KB/s) write 5512KB/s (5512KB/s), 2048KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, test write, burnproof
acd0: Audio: play, 16 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
pcm0: Mixer "vol":
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
ugen0.2: <Mitsumi Electric> at usbus0
uhub2: <Mitsumi Electric Hub in Apple Extended USB Keyboard, class 9/0, rev 1.10/4.00, addr 2> on usbus0
uhub2: 3 ports with 2 removable, bus powered
ugen0.3: <Logitech> at usbus0
ums0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/54.00, addr 3> on usbus0
ums0: 8 buttons and [XYZT] coordinates ID=0
ugen0.4: <Mitsumi Electric> at usbus0
ukbd0: <Mitsumi Electric Apple Extended USB Keyboard, class 0/0, rev 1.10/4.00, addr 4> on usbus0
kbd: new array size 4
kbd1 at ukbd0
kbd1: ukbd0, generic (0), config:0x0, flags:0x3d0000
uhid0: <Mitsumi Electric Apple Extended USB Keyboard, class 0/0, rev 1.10/4.00, addr 4> on usbus0
(probe0:sbp0:0:0:0): Error 22, Unretryable error
(probe1:sbp0:0:1:0): Error 22, Unretryable error
(probe2:sbp0:0:2:0): Error 22, Unretryable error
(probe3:sbp0:0:3:0): Error 22, Unretryable error
(probe4:sbp0:0:4:0): Error 22, Unretryable error
(probe5:sbp0:0:5:0): Error 22, Unretryable error
(probe6:sbp0:0:6:0): Error 22, Unretryable error
Trying to mount root from ufs:/dev/ad0s3 [rw]...
start_init: trying /sbin/init
gem0: link state changed to DOWN
gem0: link state changed to UP
gem0: link state changed to DOWN
gem0: link state changed to UP
gem0: link state changed to DOWN
gem0: link state changed to UP
pid 2008 (gpg-agent), uid 1001: exited on signal 11
pid 2077 (gpg-agent), uid 1001: exited on signal 11
[-- Attachment #3 --]
#
# GENERIC -- Generic kernel configuration file for FreeBSD/powerpc
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
# http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ../../conf/NOTES and NOTES files.
# If you are in doubt as to the purpose or necessity of a line, check first
# in NOTES.
#
# $FreeBSD: src/sys/powerpc/conf/GENERIC,v 1.110 2010/10/31 18:27:05 nwhitehorn Exp $
cpu AIM
ident GENERIC
machine powerpc powerpc
makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
# Platform support
options POWERMAC #NewWorld Apple PowerMacs
options PSIM #GDB PSIM ppc simulator
options MAMBO #IBM Mambo Full System Simulator
options SCHED_ULE #ULE scheduler
options INET #InterNETworking
options INET6 #IPv6 communications protocols
options SCTP #Stream Control Transmission Protocol
options FFS #Berkeley Fast Filesystem
options SOFTUPDATES #Enable FFS soft updates support
options UFS_ACL #Support for access control lists
options UFS_DIRHASH #Improve performance on big directories
options UFS_GJOURNAL #Enable gjournal-based UFS journaling
options MD_ROOT #MD is a potential root device
options NFSCLIENT #Network Filesystem Client
options NFSSERVER #Network Filesystem Server
options NFSLOCKD #Network Lock Manager
options NFS_ROOT #NFS usable as root device
options MSDOSFS #MSDOS Filesystem
options CD9660 #ISO 9660 Filesystem
options PROCFS #Process filesystem (requires PSEUDOFS)
options PSEUDOFS #Pseudo-filesystem framework
options GEOM_PART_GPT #GUID Partition Tables.
options GEOM_LABEL #Provides labelization
options COMPAT_FREEBSD4 #Keep this for a while
options COMPAT_FREEBSD5 #Compatible with FreeBSD5
options COMPAT_FREEBSD6 #Compatible with FreeBSD6
options COMPAT_FREEBSD7 #Compatible with FreeBSD7
options SCSI_DELAY=5000 #Delay (in ms) before probing SCSI
options KTRACE #ktrace(1) syscall trace support
options STACK #stack(9) support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions
options HWPMC_HOOKS # Necessary kernel hooks for hwpmc(4)
options AUDIT # Security event auditing
options MAC # TrustedBSD MAC Framework
options INCLUDE_CONFIG_FILE # Include this file in kernel
# Debugging for use in -current
#options KDB #Enable the kernel debugger
#options DDB #Support DDB
#options DEADLKRES #Enable the deadlock resolver
#options INVARIANTS #Enable calls of extra sanity checking
#options INVARIANT_SUPPORT #Extra sanity checks of internal structures, required by INVARIANTS
#options WITNESS #Enable checks to detect deadlocks and cycles
#options WITNESS_SKIPSPIN #Don't run witness on spinlocks for speed
#options MALLOC_DEBUG_MAXZONES=8 # Separate malloc(9) zones
# To make an SMP kernel, the next line is needed
#options SMP # Symmetric MultiProcessor Kernel
# CPU frequency control
device cpufreq
# Standard busses
device pci
device agp
# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
device atapicd # ATAPI CDROM drives
#device atapifd # ATAPI floppy drives
#device atapist # ATAPI tape drives
# SCSI Controllers
device ahc # AHA2940 and onboard AIC7xxx devices
options AHC_ALLOW_MEMIO # Attempt to use memory mapped I/O
options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~128k to driver.
device isp # Qlogic family
device ispfw # Firmware module for Qlogic host adapters
device mpt # LSI-Logic MPT-Fusion
device sym # NCR/Symbios/LSI Logic 53C8XX/53C1010/53C1510D
# SCSI peripherals
device scbus # SCSI bus (required for SCSI)
device da # Direct Access (disks)
device sa # Sequential Access (tape etc)
device cd # CD
device pass # Passthrough device (direct SCSI access)
# syscons is the default console driver, resembling an SCO console
device sc
device kbdmux
options SC_OFWFB # OFW frame buffer
options SC_DFLT_FONT # compile font in
makeoptions SC_DFLT_FONT=cp437
# Serial (COM) ports
device scc
device uart
# PCI Ethernet NICs that use the common MII bus controller code.
device miibus # MII bus support
device bge # Broadcom BCM570xx Gigabit Ethernet
device bm # Apple BMAC Ethernet
device gem # Sun GEM/Sun ERI/Apple GMAC
device dc # DEC/Intel 21143 and various workalikes
device fxp # Intel EtherExpress PRO/100B (82557, 82558)
# Pseudo devices.
device loop # Network loopback
device random # Entropy device
device ether # Ethernet support
device vlan # 802.1Q VLAN support
device tun # Packet tunnel.
device pty # BSD-style compatibility pseudo ttys
device md # Memory "disks"
device ofwd # Open Firmware disks
device gif # IPv6 and IPv4 tunneling
device faith # IPv6-to-IPv4 relaying/(translation)
device firmware # firmware assist module
# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
# Note that 'bpf' is required for DHCP.
device bpf #Berkeley packet filter
# USB support
options USB_DEBUG # enable debug msgs
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
device ehci # EHCI PCI->USB interface
device usb # USB Bus (required)
device uhid # "Human Interface Devices"
device ukbd # Keyboard
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
device ulpt # Printer
device umass # Disks/Mass storage - Requires scbus and da0
device ums # Mouse
device atp # Apple USB touchpad
device urio # Diamond Rio 500 MP3 player
# USB Ethernet
device aue # ADMtek USB Ethernet
device axe # ASIX Electronics USB Ethernet
device cdce # Generic USB over Ethernet
device cue # CATC USB Ethernet
device kue # Kawasaki LSI USB Ethernet
# FireWire support
device firewire # FireWire bus code
device sbp # SCSI over FireWire (Requires scbus and da)
device fwe # Ethernet over FireWire (non-standard!)
# Misc
device ds1775 # PowerMac7,2 temperature sensor
device fcu # Apple Fan Control Unit
device max6690 # PowerMac7,2 temperature sensor
device powermac_nvram # Open Firmware configuration NVRAM
device smu # Apple System Management Unit
# ADB support
device adb
device cuda
device pmu
# Powermac I2C support
device iicbus # I2C bus code
device kiic # Keywest I2C
# Other Settings
device sound
device snd_ai2s
device snd_davbus
device snd_uaudio
device wi
device cbb
device pccard
device cardbus
device wlan
device wlan_acl
device wlan_amrr
device wlan_ccmp
device wlan_rssadapt
device wlan_tkip
device wlan_wep
device wlan_xauth
device et
#device uart
device puc
#device scc
device ppc
#option sio
device ppbus
device ppi
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CA%2BWntOv1kR04sO=m3%2B1m-H332NyZ7z4j-wTm=Fpsm-WJsNfffw>