Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 30 Mar 2021 09:56:33 +0300
From:      =?UTF-8?B?w5Z6a2FuIEtJUklL?= <ozkan.kirik@gmail.com>
To:        Vincenzo Maffione <vmaffione@freebsd.org>
Cc:        FreeBSD Net <freebsd-net@freebsd.org>, krzysztof.galazka@intel.com,  gowtham.kumar.ks@intel.com, erj@freebsd.org, jeffrey.e.pieper@intel.com
Subject:   Re: ixl netmap TX queue remains full
Message-ID:  <CAAcX-AHypqKdKA0n%2BUEBt_HpeduNTeyD=VAyeC%2BzuSrH7yM-XQ@mail.gmail.com>
In-Reply-To: <CA%2B_eA9hV2k1mExm9fttbRey53vEvOtk%2BCgHX9ancsJ%2BJu10Miw@mail.gmail.com>
References:  <CAAcX-AE5%2B8v4YWix1pUxedY0aYgpoHL5G9_oUqTXRoS_prNVNQ@mail.gmail.com> <CA%2B_eA9hV2k1mExm9fttbRey53vEvOtk%2BCgHX9ancsJ%2BJu10Miw@mail.gmail.com>

next in thread | previous in thread | raw e-mail | index | archive | help
Hello Vincenzo,

Before your email, hw.ixl.enable_head_writeback =3D 1. After your suggestio=
n,
i set the hw.ixl.enable_head_writeback =3D 0. then it works properly.

Thank you so much

Cheers
=C3=96zkan

On Tue, Mar 30, 2021 at 9:22 AM Vincenzo Maffione <vmaffione@freebsd.org>
wrote:

> Hi,
>   Could this be related to
> https://reviews.freebsd.org/D26896?
>
> Moreover, what happens if you switch the enable_head_writeback sysctl?
>
> Cheers,
>   Vincenzo
>
> Il giorno lun 29 mar 2021 alle ore 10:36 =C3=96zkan KIRIK <
> ozkan.kirik@gmail.com> ha scritto:
>
>> Hello,
>>
>> I hit problems about ixl driver's netmap support. I have no problems wit=
h
>> ixgbe.
>> The problem is tested with FreeBSD 12.2-p5 and FreeBSD 13.0-RC3.
>>
>> ixl in netmap mode, it works with low throughput (about 2 Gbps) for 20-3=
0
>> seconds. And then TX queue remains full. poll with POLLOUT and even
>> ioctl(fd, NIOCTXSYNC) does not work. So that nic stops working.
>>
>> Same netmap software with ixgbe has no problems.
>>
>> pciconf -lv output:
>> ixl0@pci0:183:0:0: class=3D0x020000 card=3D0x37d215d9 chip=3D0x37d28086
>> rev=3D0x04
>> hdr=3D0x00
>>     vendor     =3D 'Intel Corporation'
>>     device     =3D 'Ethernet Connection X722 for 10GBASE-T'
>>     class      =3D network
>>     subclass   =3D ethernet
>> ixl1@pci0:183:0:1: class=3D0x020000 card=3D0x37d215d9 chip=3D0x37d28086
>> rev=3D0x04
>> hdr=3D0x00
>>     vendor     =3D 'Intel Corporation'
>>     device     =3D 'Ethernet Connection X722 for 10GBASE-T'
>>     class      =3D network
>>     subclass   =3D ethernet
>> ixl2@pci0:183:0:2: class=3D0x020000 card=3D0x37d015d9 chip=3D0x37d08086
>> rev=3D0x04
>> hdr=3D0x00
>>     vendor     =3D 'Intel Corporation'
>>     device     =3D 'Ethernet Connection X722 for 10GbE SFP+'
>>     class      =3D network
>>     subclass   =3D ethernet
>> ixl3@pci0:183:0:3: class=3D0x020000 card=3D0x37d015d9 chip=3D0x37d08086
>> rev=3D0x04
>> hdr=3D0x00
>>     vendor     =3D 'Intel Corporation'
>>     device     =3D 'Ethernet Connection X722 for 10GbE SFP+'
>>     class      =3D network
>>     subclass   =3D ethernet
>>
>> Best regards
>> _______________________________________________
>> freebsd-net@freebsd.org mailing list
>> https://lists.freebsd.org/mailman/listinfo/freebsd-net
>> To unsubscribe, send any mail to "freebsd-net-unsubscribe@freebsd.org"
>>
>



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAAcX-AHypqKdKA0n%2BUEBt_HpeduNTeyD=VAyeC%2BzuSrH7yM-XQ>