Date: Tue, 6 Mar 2012 13:05:27 -0800 (PST) From: Youri Adonis <vrtuff@yahoo.com> To: freebsd-mips@freebsd.org, Adrian Chadd <adrian.chadd@gmail.com>, Monthadar Al Jaberi <monthadar@gmail.com> Subject: Re: arge0: initialization failed: no memory for rx buffers Message-ID: <1331067927.59003.YahooMailClassic@web160706.mail.bf1.yahoo.com> In-Reply-To: <CA%2BsBSoKsHivc=fe2G=0OOwbdr6r2VnQd-zZOBxKKXV2gk_PAJw@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
--- On Tue, 3/6/12, Monthadar Al Jaberi <monthadar@gmail.com> wrote: > From: Monthadar Al Jaberi <monthadar@gmail.com> > Subject: arge0: initialization failed: no memory for rx buffers > To: freebsd-mips@freebsd.org, "Adrian Chadd" <adrian.chadd@gmail.com> > Date: Tuesday, March 6, 2012, 10:37 AM > Hi everyone, >=20 > I am cant seem to boot my RouterStation Pro from NFS. I get > this error > from arge0 after a couple of DHCP/BOOTP timeout for server > 255.255.255.255 > arge0: initialization failed: no memory for rx buffers >=20 > It seems no packets are sent out? I cant seem to see any on > tcpdump. >=20 > I am attaching kernel config and boot dump. >=20 > Thanks! >=20 > include=C2=A0=C2=A0=C2=A0 =C2=A0=C2=A0=C2=A0 "AR71XX_BASE" > ident=C2=A0=C2=A0=C2=A0 =C2=A0=C2=A0=C2=A0 "RSPRO_NFS" > hints=C2=A0=C2=A0=C2=A0 =C2=A0=C2=A0=C2=A0 "RSPRO.hints" >=20 > # RTC - requires hackery in the spibus code to work > device=C2=A0=C2=A0=C2=A0 =C2=A0=C2=A0=C2=A0 pcf2123_rtc >=20 > # New Network Filesystem Client > options=C2=A0=C2=A0=C2=A0 =C2=A0=C2=A0=C2=A0 NFSCL > options=C2=A0=C2=A0=C2=A0 =C2=A0=C2=A0=C2=A0 > NFSLOCKD=C2=A0=C2=A0=C2=A0 =C2=A0=C2=A0=C2=A0 #Network Lock > Manager >=20 > # GEOM modules > device=C2=A0=C2=A0=C2=A0 =C2=A0=C2=A0=C2=A0 > geom_redboot=C2=A0=C2=A0=C2=A0 # to get access to the SPI > flash partitions > device=C2=A0=C2=A0=C2=A0 =C2=A0=C2=A0=C2=A0 > geom_uzip=C2=A0=C2=A0=C2=A0 # compressed in-memory > filesystem support > options=C2=A0=C2=A0=C2=A0 =C2=A0=C2=A0=C2=A0 GEOM_UZIP >=20 > # For DOS > options=C2=A0=C2=A0=C2=A0 =C2=A0=C2=A0=C2=A0 GEOM_PART_BSD > options=C2=A0=C2=A0=C2=A0 =C2=A0=C2=A0=C2=A0 GEOM_PART_MBR > options=C2=A0=C2=A0=C2=A0 =C2=A0=C2=A0=C2=A0 MSDOSFS >=20 > # For GPT > options=C2=A0=C2=A0=C2=A0 =C2=A0=C2=A0=C2=A0 GEOM_LABEL > options=C2=A0=C2=A0=C2=A0 =C2=A0=C2=A0=C2=A0 GEOM_PART_GPT >=20 > options=C2=A0=C2=A0=C2=A0 =C2=A0=C2=A0=C2=A0 NFS_ROOT > options=C2=A0=C2=A0=C2=A0 =C2=A0=C2=A0=C2=A0 BOOTP > options=C2=A0=C2=A0=C2=A0 =C2=A0=C2=A0=C2=A0 BOOTP_NFSROOT > options=C2=A0=C2=A0=C2=A0 =C2=A0=C2=A0=C2=A0 BOOTP_NFSV3 > options=C2=A0=C2=A0=C2=A0 =C2=A0=C2=A0=C2=A0 > BOOTP_WIRED_TO=3Darge0 > options=C2=A0=C2=A0=C2=A0 =C2=A0=C2=A0=C2=A0 BOOTP_COMPAT > options=C2=A0=C2=A0=C2=A0 =C2=A0=C2=A0=C2=A0 > ROOTDEVNAME=3D\"nfs:192.168.1.184:/usr/root\" >=20 >=20 > boot dump: > Now booting linux kernel: > Base address 0x80050000 Entry 0x80050100 > memsize=3D0x08000000 > modetty0=3D0,n,8,1,hw > board=3DRouterStation PRO > ethaddr=3D00.15.6d.c8.c9.2c > CPU platform: Atheros AR7161 rev 2 > CPU Frequency=3D720 MHz > CPU DDR Frequency=3D360 MHz > CPU AHB Frequency=3D180 MHz > platform frequency: 720000000 > arguments: > =C2=A0 a0 =3D 00000002 > =C2=A0 a1 =3D 80050028 > =C2=A0 a2 =3D 80050000 > =C2=A0 a3 =3D 0000000a > Cmd line:=C2=A0 > =EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD~=EF=BF=BD=EF=BF=BDw=EF=BF= =BD=EF=BF=BD.=DF=B7=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD= =EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BDc=EF=BF=BD=EF=BF=BD= =EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF= =BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF= =BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD= =EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF= =BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF= =BD]=EF=BF=BDo=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF= =BD=EF=BF=BD_=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF= =BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD?=EF=BF=BDS > Environment: > =C2=A0 memsize =3D 0x08000000 > =C2=A0 modetty0 =3D 0,n,8,1,hw > =C2=A0 ethaddr =3D 00.15.6d.c8.c9.2c > =C2=A0 board =3D RouterStation PRO > Cache info: > =C2=A0 picache_stride=C2=A0 =C2=A0 =3D 4096 > =C2=A0 picache_loopcount =3D 16 > =C2=A0 pdcache_stride=C2=A0 =C2=A0 =3D 4096 > =C2=A0 pdcache_loopcount =3D 8 > cpu0: MIPS Technologies processor v116.147 > =C2=A0 MMU: Standard TLB, 16 entries > =C2=A0 L1 i-cache: 4 ways of 512 sets, 32 bytes per line > =C2=A0 L1 d-cache: 4 ways of 256 sets, 32 bytes per line > =C2=A0 > Config1=3D0x9ee3519e<PerfCount,WatchRegs,MIPS16,EJTAG> > =C2=A0 Config3=3D0x20 > KDB: debugger backends: ddb > KDB: current backend: ddb > Copyright (c) 1992-2012 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, > 1992, 1993, 1994 > =C2=A0=C2=A0=C2=A0 The Regents of the University of > California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD > Foundation. > FreeBSD 10.0-CURRENT #2: Tue Mar=C2=A0 6 15:25:15 CET 2012 > =C2=A0 =C2=A0 > root@freebsd-re-9:/usr/obj/mips.mipseb/usr/src/sys/RSPRO_NFS > mips > WARNING: WITNESS option enabled, expect reduced > performance. > MEMGUARD DEBUGGING ALLOCATOR INITIALIZED: > =C2=A0=C2=A0=C2=A0 MEMGUARD map base: 0xc0800000 > =C2=A0=C2=A0=C2=A0 MEMGUARD map limit: 0xc1c00000 > =C2=A0=C2=A0=C2=A0 MEMGUARD map size: 20480 KBytes > real memory=C2=A0 =3D 134217728 (131072K bytes) > avail memory =3D 122867712 (117MB) > random device not loaded; using insecure entropy > nexus0: <MIPS32 root nexus> > clock0: <Generic MIPS32 ticker> on nexus0 > Timecounter "MIPS32" frequency 360000000 Hz quality 800 > Event timer "MIPS32" frequency 360000000 Hz quality 800 > apb0 at irq 4 on nexus0 > uart0: <16550 or compatible> on apb0 > uart0: console (115200,n,8,1) > gpio0: <Atheros AR71XX GPIO driver> on apb0 > gpio0: [GIANT-LOCKED] > gpio0: function_set: 0x0 > gpio0: function_clear: 0x0 > gpio0: gpio pinmask=3D0xff > gpioc0: <GPIO controller> on gpio0 > gpiobus0: <GPIO bus> on gpio0 > gpioled0: <GPIO led> at pin(s) 2 on gpiobus0 > ehci0: <AR71XX Integrated USB 2.0 controller> at mem > 0x1b000000-0x1bffffff irq 1 on nexus0 > usbus0: set host controller mode > usbus0: EHCI version 1.0 > usbus0: set host controller mode > usbus0: <AR71XX Integrated USB 2.0 controller> on > ehci0 > pcib0 at irq 0 on nexus0 > pci0: <PCI bus> on pcib0 > pci0: <old, non-VGA display device> at device 0.0 (no > driver attached) > ath0: <Atheros 5413> irq 0 at device 17.0 on pci0 > ath0: AR5413 mac 10.5 RF5413 phy 6.1 > ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0063 > ath1: <Atheros 5413> irq 1 at device 18.0 on pci0 > ath1: AR5413 mac 10.5 RF5413 phy 6.1 > ath1: 2GHz radio: 0x0000; 5GHz radio: 0x0063 > arge0: <Atheros AR71xx built-in ethernet interface> at > mem > 0x19000000-0x19000fff irq 2 on nexus0 > miibus0: <MII bus> on arge0 > ukphy0: <Generic IEEE 802.3u media interface> PHY 4 on > miibus0 > ukphy0:=C2=A0 none, 10baseT, 10baseT-FDX, 100baseTX, > 100baseTX-FDX, > 1000baseT-FDX, 1000baseT-FDX-master, auto > arge0: Ethernet address: 00:15:6d:c8:c9:2c > arge1: <Atheros AR71xx built-in ethernet interface> at > mem > 0x1a000000-0x1a000fff irq 3 on nexus0 > arge1: Ethernet address: 00:15:6d:c8:c9:2d > spi0: <AR71XX SPI> at mem 0x1f000000-0x1f00000f on > nexus0 > spibus0: <spibus bus> on spi0 > mx25l0: <M25Pxx Flash Family> at cs 0 on spibus0 > mx25l0: mx25ll128, sector 65536 bytes, 256 sectors > ar71xx_wdog0: <Atheros AR71XX watchdog timer> on > nexus0 > Timecounters tick every 1.000 msec > usbus0: 480Mbps High Speed USB v2.0 > ugen0.1: <Atheros> at usbus0 > uhub0: <Atheros EHCI root HUB, class 9/0, rev 2.00/1.00, > addr 1> on usbus0 > bootpc_init: wired to interface 'arge0' > Sending DHCP Discover packet from interface arge0 > (00:15:6d:c8:c9:2c) > arge0: link state changed to DOWN > uhub0: 2 ports with 2 removable, self powered > ugen0.2: <Generic> at usbus0 > umass0: <Generic USB Storage, class 0/0, rev 2.00/94.54, > addr 2> on usbus0 > umass0:=C2=A0 SCSI over Bulk-Only; quirks =3D 0x4100 > umass0:0:0:-1: Attached to scbus0 > (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 > 0 > (probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error > (probe0:umass-sim0:0:0:0): SCSI status: Check Condition > (probe0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 > (Medium not present) > da0 at umass-sim0 bus 0 scbus0 target 0 lun 0 > da0: <Generic STORAGE DEVICE 9454> Removable Direct > Access SCSI-0 device > da0: 40.000MB/s transfers > da0: Attempt to query device size failed: NOT READY, Medium > not present > DHCP/BOOTP timeout for server 255.255.255.255 > DHCP/BOOTP timeout for server 255.255.255.255 > DHCP/BOOTP timeout for server 255.255.255.255 > DHCP/BOOTP timeout for server 255.255.255.255 > DHCP/BOOTP timeout for server 255.255.255.255 > DHCP/BOOTP timeout for server 255.255.255.255 > DHCP/BOOTP timeout for server 255.255.255.255 > DHCP/BOOTP timeout for server 255.255.255.255 > DHCP/BOOTP timeout for server 255.255.255.255 > DHCP/BOOTP timeout for server 255.255.255.255 > DHCP/BOOTP timeout for server 255.255.255.255 > DHCP/BOOTP timeout for server 255.255.255.255 > DHCP/BOOTP timeout for server 255.255.255.255 > arge0: initialization failed: no memory for rx buffers > DHCP/BOOTP timeout for server 255.255.255.255 > arge0: initialization failed: no memory for rx buffers >=20 >=20 > --=20 > Monthadar Al Jaberi Though I haven't updated to the latest AR71XX trunk, the only way I can thi= s work so far was to hardcode the MAC address. Youri > _______________________________________________ > freebsd-mips@freebsd.org > mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-mips > To unsubscribe, send any mail to "freebsd-mips-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1331067927.59003.YahooMailClassic>