Date: Wed, 12 Feb 2014 03:28:07 +0000 From: David Somayajulu <david.somayajulu@qlogic.com> To: Hakisho Nukama <nukama@gmail.com>, "net@freebsd.org" <net@freebsd.org> Subject: RE: if_qlxgb trouble Message-ID: <49F5640B08EAA94DAF2F6B6145E6A08A899173E6@AVMB1.qlogic.org> In-Reply-To: <CA%2Bzcas1PjrWC4EVOgQAxiePcnOH3tp6=fH1h9t5L=eQPmh8_Pg@mail.gmail.com> References: <CA%2Bzcas1PjrWC4EVOgQAxiePcnOH3tp6=fH1h9t5L=eQPmh8_Pg@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi Hakisho,
I am using the same driver on a FreeBSD9.0 system and don't see the proble=
m. The only difference is that the firmware version on my board is 4.9.46.1=
325015960
We can take this off line and discuss further.
Cheers
David S.
=3D=3D=3D=3D
ql0: <Qlogic ISP 80xx PCI CNA Adapter-Ethernet Function v1.1.36> mem 0xfa40=
0000-0xfa5fffff,0xfbb30000-0xfbb3ffff irq 24 at device 0.0 on pci9
ql0: qla_pci_attach: firmware[4.9.46.1325015960]
ql0: Ethernet address: 00:0e:1e:04:2d:98
ql1: <Qlogic ISP 80xx PCI CNA Adapter-Ethernet Function v1.1.36> mem 0xfa60=
0000-0xfa7fffff,0xfbbb0000-0xfbbbffff irq 24 at device 0.1 on pci9
ql1: qla_pci_attach: firmware[4.9.46.1325015960]
ql1: Ethernet address: 00:0e:1e:04:2d:9c
# ifconfig ql0
ql0: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=3D8013b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,TSO=
4,LINKSTATE>
ether 00:0e:1e:04:2d:98
inet 192.168.1.2 netmask 0xffffff00 broadcast 192.168.1.255
inet6 fe80::20e:1eff:fe04:2d98%ql0 prefixlen 64 scopeid 0xe
nd6 options=3D23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
media: Ethernet autoselect (10Gbase-SR <full-duplex>)
status: active
-----Original Message-----
From: owner-freebsd-net@freebsd.org [mailto:owner-freebsd-net@freebsd.org] =
On Behalf Of Hakisho Nukama
Sent: Tuesday, February 11, 2014 7:14 AM
To: net@freebsd.org
Subject: if_qlxgb trouble
I am trying to connect a HP NC523SFP in
FreeBSD 10.0-RELEASE over SFP+ to a switch.
This is my current progress, any hints are welcome.
More information on demand.
# kldload -v if_qlxgb
ql0: <Qlogic ISP 80xx PCI CNA Adapter-Ethernet Function v1.1.36> mem 0xfdc0=
0000-0xfddfffff, 0xfdbf0000-0xfdbfffff irq 16 at device 0.0 on pci11
ql0: qla_pci_attach: firmware[4.8.22.1319135230]
ql0: Ethernet address: 2c:59:e5:ca:ff:ee
ql1: <Qlogic ISP 80xx PCI CNA Adapter-Ethernet Function v1.1.36> mem 0xfd80=
0000-0xfd9fffff,0xfd7f0000-0xfd7fffff irq 16 at device 0.1 on
pci11
ql1: qla_pci_attach: firmware[4.8.22.1319135230]
ql1: Ethernet address: 2c:59:e5:ca:ff:ee
# sysctl dev.ql
dev.ql.0.%desc: Qlogic ISP 80xx PCI CNA Adapter-Ethernet Function v1.1.36
dev.ql.0.%driver: ql
dev.ql.0.%location: slot=3D0 function=3D0 handle=3D\_SB_.PCI0.PT02.IPE4.
IPE1.PES1
dev.ql.0.%pnpinfo: vendor=3D0x1077 device=3D0x8020 subvendor=3D0x103c
subdevice=3D0x3733 class=3D0x020000
dev.ql.0.%parent: pci11
dev.ql.0.stats: 0
dev.ql.0.fw_version: 4.8.22.1319135230
dev.ql.0.debug: 0
dev.ql.0.std_replenish: 8
dev.ql.0.jumbo_replenish: 2
dev.ql.0.rcv_pkt_thres: 128
dev.ql.0.rcv_pkt_thres_d: 32
dev.ql.0.snd_pkt_thres: 16
dev.ql.0.free_pkt_thres: 1024
dev.ql.0.num_rds_rings: 2
dev.ql.0.num_sds_rings: 4
dev.ql.1.%desc: Qlogic ISP 80xx PCI CNA Adapter-Ethernet Function v1.1.36
dev.ql.1.%driver: ql
dev.ql.1.%location: slot=3D0 function=3D1 handle=3D\_SB_.PCI0.PT02.IPE4.IPE=
1.PE11
dev.ql.1.%pnpinfo: vendor=3D0x1077 device=3D0x8020 subvendor=3D0x103c
subdevice=3D0x3733 class=3D0x020000
dev.ql.1.%parent: pci11
dev.ql.1.stats: 0
dev.ql.1.fw_version: 4.8.22.1319135230
dev.ql.1.debug: 0
dev.ql.1.std_replenish: 8
dev.ql.1.jumbo_replenish: 2
dev.ql.1.rcv_pkt_thres: 128
dev.ql.1.rcv_pkt_thres_d: 32
dev.ql.1.snd_pkt_thres: 16
dev.ql.1.free_pkt_thres: 1024
dev.ql.1.num_rds_rings: 2
dev.ql.1.num_sds_rings: 4
# ifconfig ql0 10.13.37.21
ql0: qla_issue_cmd: cmd[0x001b2218] =3D 0x80000002
sig[0x001b2228] =3D 0xcafe0100
arg1[0x001b221c] =3D 0x00000000
arg2[0x001b2220] =3D 0x00000000
arg3[0x001b2224] =3D 0x00000000
ql0: qla_issue_cmd: exit (ret =3D 0xffffffff)
rsp =3D 0x80000002
arg1 =3D 0x00000000
arg2 =3D 0x00000000
arg3 =3D 0x00000000
ql0: qla_get_max_rds: Q8_CMD_RD_MAX_RDS_PER_CNTXT failed
ql0: qla_issue_cmd: cmd[0x001b2218] =3D 0x80000003
sig[0x001b2228] =3D 0xcafe0100
arg1[0x001b221c] =3D 0x00000000
arg2[0x001b2220] =3D 0x00000000
arg3[0x001b2224] =3D 0x00000000
ql0: qla_issue_cmd: exit (ret =3D 0xffffffff)
rsp =3D 0x80000003
arg1 =3D 0x00000000
arg2 =3D 0x00000000
arg3 =3D 0x00000000
ql0: qla_get_max_sds: Q8_CMD_RD_MAX_RDS_PER_CNTXT failed
ql0: qla_issue_cmd: cmd[0x001b2218] =3D 0x80000004
sig[0x001b2228] =3D 0xcafe0100
arg1[0x001b221c] =3D 0x00000000
arg2[0x001b2220] =3D 0x00000000
arg3[0x001b2224] =3D 0x00000000
ql0: qla_issue_cmd: exit (ret =3D 0xffffffff)
rsp =3D 0x80000004
arg1 =3D 0x00000000
arg2 =3D 0x00000000
arg3 =3D 0x00000000
ql0: qla_get_max_rules: Q8_CMD_RD_MAX_RULES_PER_CNTXT failed
ql0: qla_issue_cmd: cmd[0x001b2218] =3D 0x80000005
sig[0x001b2228] =3D 0xcafe0100
arg1[0x001b221c] =3D 0x00000000
arg2[0x001b2220] =3D 0x00000000
arg3[0x001b2224] =3D 0x00000000
ql0: qla_issue_cmd: exit (ret =3D 0xffffffff)
rsp =3D 0x80000005
arg1 =3D 0x00000000
arg2 =3D 0x00000000
arg3 =3D 0x00000000
ql0: qla_get_max_rcv_cntxts: Q8_CMD_RD_MAX_RX_CNTXT failed
ql0: qla_issue_cmd: cmd[0x001b2218] =3D 0x80000006
sig[0x001b2228] =3D 0xcafe0100
arg1[0x001b221c] =3D 0x00000000
arg2[0x001b2220] =3D 0x00000000
arg3[0x001b2224] =3D 0x00000000
ql0: qla_issue_cmd: exit (ret =3D 0xffffffff)
rsp =3D 0x80000006
arg1 =3D 0x00000000
arg2 =3D 0x00000000
arg3 =3D 0x00000000
ql0: qla_get_max_tx_cntxts: Q8_CMD_RD_MAX_TX_CNTXT failed
ql0: qla_issue_cmd: cmd[0x001b2218] =3D 0x80000018
sig[0x001b2228] =3D 0xcafe0100
arg1[0x001b221c] =3D 0x00000000
arg2[0x001b2220] =3D 0x00000000
arg3[0x001b2224] =3D 0x00000000
ql0: qla_issue_cmd: exit (ret =3D 0xffffffff)
rsp =3D 0x80000018
arg1 =3D 0x00000000
arg2 =3D 0x00000000
arg3 =3D 0x00000000
ql0: qla_get_max_mtu: Q8_CMD_RD_MAX_MTU failed
ql0: qla_issue_cmd: cmd[0x001b2218] =3D 0x80000019
sig[0x001b2228] =3D 0xcafe0100
arg1[0x001b221c] =3D 0x00000000
arg2[0x001b2220] =3D 0x00000000
arg3[0x001b2224] =3D 0x00000000
ql0: qla_issue_cmd: exit (ret =3D 0xffffffff)
rsp =3D 0x80000019
arg1 =3D 0x00000000
arg2 =3D 0x00000000
arg3 =3D 0x00000000
ql0: qla_get_max_lro: Q8_CMD_RD_MAX_LRO failed
ql0: qla_issue_cmd: cmd[0x001b2218] =3D 0x80000016
sig[0x001b2228] =3D 0xcafe0100
arg1[0x001b221c] =3D 0x00000000
arg2[0x001b2220] =3D 0x00000000
arg3[0x001b2224] =3D 0x00000000
ql0: qla_issue_cmd: exit (ret =3D 0xffffffff)
rsp =3D 0x80000016
arg1 =3D 0x00000000
arg2 =3D 0x00000000
arg3 =3D 0x00000000
ql0: qla_get_flow_control: Q8_CMD_GET_FLOW_CNTRL failed
ql0: qla_issue_cmd: cmd[0x001b2218] =3D 0x80000007
sig[0x001b2228] =3D 0xcafe0100
arg1[0x001b221c] =3D 0x00000000
arg2[0x001b2220] =3D 0x15c7d160
arg3[0x001b2224] =3D 0x00000120
ql0: qla_issue_cmd: exit (ret =3D 0xffffffff)
rsp =3D 0x80000007
arg1 =3D 0x00000000
arg2 =3D 0x15c7d160
arg3 =3D 0x00000120
ql0: qla_init_rcv_cntxt: Q8_CMD_CREATE_RX_CNTXT failed
ql0: qla_fw_cmd: xmit queue full
# ifconfig ql1 10.13.37.2
ql1: qla_issue_cmd: cmd[0x001b2218] =3D 0x80000002
sig[0x001b2228] =3D 0xcafe0101
arg1[0x001b221c] =3D 0x00000000
arg2[0x001b2220] =3D 0x00000000
arg3[0x001b2224] =3D 0x00000000
ql1: qla_issue_cmd: exit (ret =3D 0xffffffff)
rsp =3D 0x80000002
arg1 =3D 0x00000000
arg2 =3D 0x00000000
arg3 =3D 0x00000000
ql1: qla_get_max_rds: Q8_CMD_RD_MAX_RDS_PER_CNTXT failed
ql1: qla_issue_cmd: cmd[0x001b2218] =3D 0x80000003
sig[0x001b2228] =3D 0xcafe0101
arg1[0x001b221c] =3D 0x00000000
arg2[0x001b2220] =3D 0x00000000
arg3[0x001b2224] =3D 0x00000000
ql1: qla_issue_cmd: exit (ret =3D 0xffffffff)
rsp =3D 0x80000003
arg1 =3D 0x00000000
arg2 =3D 0x00000000
arg3 =3D 0x00000000
ql1: qla_get_max_sds: Q8_CMD_RD_MAX_RDS_PER_CNTXT failed
ql1: qla_issue_cmd: cmd[0x001b2218] =3D 0x80000004
sig[0x001b2228] =3D 0xcafe0101
arg1[0x001b221c] =3D 0x00000000
arg2[0x001b2220] =3D 0x00000000
arg3[0x001b2224] =3D 0x00000000
ql1: qla_issue_cmd: exit (ret =3D 0xffffffff)
rsp =3D 0x80000004
arg1 =3D 0x00000000
arg2 =3D 0x00000000
arg3 =3D 0x00000000
ql1: qla_get_max_rules: Q8_CMD_RD_MAX_RULES_PER_CNTXT failed
ql1: qla_issue_cmd: cmd[0x001b2218] =3D 0x80000005
sig[0x001b2228] =3D 0xcafe0101
arg1[0x001b221c] =3D 0x00000000
arg2[0x001b2220] =3D 0x00000000
arg3[0x001b2224] =3D 0x00000000
ql1: qla_issue_cmd: exit (ret =3D 0xffffffff)
rsp =3D 0x80000005
arg1 =3D 0x00000000
arg2 =3D 0x00000000
arg3 =3D 0x00000000
ql1: qla_get_max_rcv_cntxts: Q8_CMD_RD_MAX_RX_CNTXT failed
ql1: qla_issue_cmd: cmd[0x001b2218] =3D 0x80000006
sig[0x001b2228] =3D 0xcafe0101
arg1[0x001b221c] =3D 0x00000000
arg2[0x001b2220] =3D 0x00000000
arg3[0x001b2224] =3D 0x00000000
ql1: qla_issue_cmd: exit (ret =3D 0xffffffff)
rsp =3D 0x80000006
arg1 =3D 0x00000000
arg2 =3D 0x00000000
arg3 =3D 0x00000000
ql1: qla_get_max_tx_cntxts: Q8_CMD_RD_MAX_TX_CNTXT failed
ql1: qla_issue_cmd: cmd[0x001b2218] =3D 0x80000018
sig[0x001b2228] =3D 0xcafe0101
arg1[0x001b221c] =3D 0x00000000
arg2[0x001b2220] =3D 0x00000000
arg3[0x001b2224] =3D 0x00000000
ql1: qla_issue_cmd: exit (ret =3D 0xffffffff)
rsp =3D 0x80000018
arg1 =3D 0x00000000
arg2 =3D 0x00000000
arg3 =3D 0x00000000
ql1: qla_get_max_mtu: Q8_CMD_RD_MAX_MTU failed
ql1: qla_issue_cmd: cmd[0x001b2218] =3D 0x80000019
sig[0x001b2228] =3D 0xcafe0101
arg1[0x001b221c] =3D 0x00000000
arg2[0x001b2220] =3D 0x00000000
arg3[0x001b2224] =3D 0x00000000
ql1: qla_issue_cmd: exit (ret =3D 0xffffffff)
rsp =3D 0x80000019
arg1 =3D 0x00000000
arg2 =3D 0x00000000
arg3 =3D 0x00000000
ql1: qla_get_max_lro: Q8_CMD_RD_MAX_LRO failed
ql1: qla_issue_cmd: cmd[0x001b2218] =3D 0x80000016
sig[0x001b2228] =3D 0xcafe0101
arg1[0x001b221c] =3D 0x00000000
arg2[0x001b2220] =3D 0x00000000
arg3[0x001b2224] =3D 0x00000000
ql1: qla_issue_cmd: exit (ret =3D 0xffffffff)
rsp =3D 0x80000016
arg1 =3D 0x00000000
arg2 =3D 0x00000000
arg3 =3D 0x00000000
ql1: qla_get_flow_control: Q8_CMD_GET_FLOW_CNTRL failed
ql1: qla_issue_cmd: cmd[0x001b2218] =3D 0x80000007
sig[0x001b2228] =3D 0xcafe0101
arg1[0x001b221c] =3D 0x00000002
arg2[0x001b2220] =3D 0x0923b160
arg3[0x001b2224] =3D 0x00000120
ql1: qla_issue_cmd: exit (ret =3D 0xffffffff)
rsp =3D 0x80000007
arg1 =3D 0x00000002
arg2 =3D 0x0923b160
arg3 =3D 0x00000120
ql1: qla_init_rcv_cntxt: Q8_CMD_CREATE_RX_CNTXT failed
ql1: qla_fw_cmd: xmit queue full
# ifconfig ql0
ql0: flags=3D8803<UP,BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=3D8013b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,TSO4,LI=
NKSTATE>
ether 2c:59:e5:ca:ff:ee
inet 10.13.37.2 netmask 0xffffff00 broadcast 10.13.37.255
nd6 options=3D29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect
status: no carrier
# ifconfig ql0
ql1: flags=3D8803<UP,BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=3D8013b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,TSO4,LI=
NKSTATE>
ether 2c:59:e5:ca:ff:ee
inet 10.13.37.3 netmask 0xffffff00 broadcast 10.13.37.255
nd6 options=3D29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect
status: no carrier
Best Regards,
Hakisho Nukama
_______________________________________________
freebsd-net@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to "freebsd-net-unsubscribe@freebsd.org"
________________________________
This message and any attached documents contain information from QLogic Cor=
poration or its wholly-owned subsidiaries that may be confidential. If you =
are not the intended recipient, you may not read, copy, distribute, or use =
this information. If you have received this transmission in error, please n=
otify the sender immediately by reply e-mail and then delete this message.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?49F5640B08EAA94DAF2F6B6145E6A08A899173E6>