Date: Sat, 22 Dec 2012 22:27:13 +0300 From: =?KOI8-R?B?99HexdPMwdcg4cfB0M/X?= <agapov.slava@gmail.com> To: freebsd-usb@freebsd.org Subject: Re: usb d-link dwa-125 Message-ID: <CAAVBhRCjQ55z9Vw=3QRS0c6XHJMWnwyYX1haqAu11y=9Q%2B=Ufg@mail.gmail.com> In-Reply-To: <CAAVBhRAAFDy1S_iph2-uyJYEQMAj2Bohh-fO2p6OqYSjUGFybQ@mail.gmail.com> References: <CAAVBhRAAFDy1S_iph2-uyJYEQMAj2Bohh-fO2p6OqYSjUGFybQ@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
i forgot uname -a FreeBSD 10.0-CURRENT #0 r244586: 2012/12/22 =F7=D1=DE=C5=D3=CC=C1=D7 =E1=C7=C1=D0=CF=D7 <agapov.slava@gmail.= com> > Hello all. > > I use usb wi-fi d-link dwa-125 > What I do: > 1. insert usb > 2. ugen2.2: <Ralink> at usbus2 > 3. usbconfig -d 2.2 dump_device_desc > ugen2.2: <11n Adapter Ralink> at usbus5, cfg=3D0 md=3DHOST spd=3DHIGH (48= 0Mbps) > pwr=3DON > > bLength =3D 0x0012 > bDescriptorType =3D 0x0001 > bcdUSB =3D 0x0200 > bDeviceClass =3D 0x0000 > bDeviceSubClass =3D 0x0000 > bDeviceProtocol =3D 0x0000 > bMaxPacketSize0 =3D 0x0040 > idVendor =3D 0x2001 > [b] idProduct =3D 0x3c1e [/b] > bcdDevice =3D 0x0101 > iManufacturer =3D 0x0001 <Ralink> > iProduct =3D 0x0002 <11n Adapter> > iSerialNumber =3D 0x0003 <1.0> > bNumConfigurations =3D 0x0001 > 4. > in /usr/src/sys/dev/usb/usbdevs added > product DLINK DWA125 0x3c1e DWA-125 > in /usr/src/sys/dev/usb/usbdevs added > RUN_DEV(DLINK, DWA125), > and then > cd /usr/src/sys/modules/usb/run > make > 5. load new kernel module > kldload ./if_run.ko > > 6. dmesg > run0: <Ralink 11n Adapter, class 0/0, rev 2.00/1.01, addr 2> on usbus2 > run0: MAC/BBP RT5390 (rev 0x0503), RF unknown (MIMO 1T1R), address > bc:f6:85:f8:d1:90 > > 7. ifconfig wlan0 create wlandev run0 wlanmode hostap > ifconfig wlan0 create wlandev run0 wlanmode hostap > > 8. After this, my usb is crashed > in dmesg > wlan0: Ethernet address: bc:f6:85:f8:d1:90 > run0: firmware RT3071 ver. 0.236 loaded > wlan0: ieee80211_new_state_locked: pending INIT -> SCAN transition lost > run0: at uhub2, port 4, addr 2 (disconnected) > usbd_req_re_enumerate: addr=3D2, set address failed! (USB_ERR_STALLED, > ignored) > usbd_req_re_enumerate: addr=3D2, set address failed! (USB_ERR_STALLED, > ignored) > ugen2.2: <Ralink> at usbus2 (disconnected) > > Help me with this, please. > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAAVBhRCjQ55z9Vw=3QRS0c6XHJMWnwyYX1haqAu11y=9Q%2B=Ufg>