Date: Tue, 6 May 2014 01:23:12 -0300 From: Luiz Otavio O Souza <loos.br@gmail.com> To: Adrian Chadd <adrian@freebsd.org> Cc: Luiz Otavio O Souza <loos@freebsd.org>, "freebsd-embedded@freebsd.org" <freebsd-embedded@freebsd.org>, Harm Weites <harm@weites.com> Subject: Re: etherswitchcfg reports no vlan capabilities on rtl8366rb Message-ID: <CAJ8CS7rCjEwUN7xEr_5YPko7bb4fqbsm_JJ2Mdiu=AFoDSHtiA@mail.gmail.com> In-Reply-To: <CAJ-Vmo=2hMOtDQqL1cJCGiW2wj6ubdQWu_50-umuAq=QasEARQ@mail.gmail.com> References: <5366B4A0.7090803@weites.com> <CAJ-Vmo=2hMOtDQqL1cJCGiW2wj6ubdQWu_50-umuAq=QasEARQ@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, May 4, 2014 at 9:36 PM, Adrian Chadd <adrian@freebsd.org> wrote: > Hi, > > Hm, it sounds like the support for vlan configuration from Luiz broke things. > > Luiz, do you have some time to help Harm figure out why your vlan > config stuff broke the rtl8366 switch support? > Sure, i'll try to fix it before BSDCan, but the clock is ticking fast this week :/ Luiz > > > On 4 May 2014 14:44, Harm Weites <harm@weites.com> wrote: >> Hi, >> >> My 1043ND is running HEAD @ r265004M and it's a bit unhappy when >> configuring vlans on the RTL8366RB. Only after reverting revisions >> 253569 253568 and 250382 things went back to running normal. >> >> This is from before reverting: >> >> # etherswitchcfg -v info >> etherswitch0: Realtek RTL8366RB with 6 ports and 16 VLAN groups >> etherswitch0: VLAN capabilities=0<> >> port0: >> flags=0<> >> media: Ethernet autoselect (none) >> status: no carrier >> port1: >> flags=0<> >> media: Ethernet autoselect (1000baseT <full-duplex>) >> status: active >> port2: >> flags=0<> >> media: Ethernet autoselect (none) >> status: no carrier >> port3: >> flags=0<> >> media: Ethernet autoselect (none) >> status: no carrier >> port4: >> flags=0<> >> media: Ethernet autoselect (none) >> status: no carrier >> port5: >> flags=0<> >> media: Ethernet 1000baseT <half-duplex,rxpause,txpause> >> status: active >> vlangroup0: >> vlan: 4094 >> members 5t >> vlangroup1: >> vlan: 1 >> members 0,5t >> vlangroup2: >> vlan: 2 >> members 1,2,3,4,5t >> vlangroup3: >> vlan: 4 >> members none >> [..] >> >> # etherswitchcfg config vlan_mode >> vlan_mode needs an argument >> >> This is annoying as well, though setting it to port produces no output >> and apparently doesn't work out anyway. >> >> # etherswitchcfg port1 pvid >> pvid needs an argument >> port1: >> flags=0<> >> media: Ethernet autoselect (1000baseT <full-duplex>) >> status: active >> # etherswitchcfg port1 pvid 2 >> etherswitchcfg: ioctl(IOETHERSWITCHSETPORT): Device not configured >> >> I decided to just leave out those revisions to make it usable again, >> since those were the most notable changes in the etherswitch area. >> >> Regards, >> Harm
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAJ8CS7rCjEwUN7xEr_5YPko7bb4fqbsm_JJ2Mdiu=AFoDSHtiA>