Date: Mon, 29 Apr 2013 20:00:57 +0200 From: Fabian Wenk <fabian@wenks.ch> To: freebsd-stable@freebsd.org Subject: Re: [Solved] [UART] GPS 18-5Hz LVC and COM1 silence, OK on Linux though... Message-ID: <517EB559.3060200@wenks.ch> In-Reply-To: <CAJ-Vmo=50vH0zQwq4fc_mo-57ong32QZS2Z2XtZP6T3EkkWPSg@mail.gmail.com> References: <CADWvR2gUqifxF4562%2BTdBea9h%2BSEk-=7fUk8%2B18B-31Y0rh=wA@mail.gmail.com> <517DB738.4060902@restecp.com> <CADWvR2jTF4wFjCf2MvKuQWq-gWXmsKwfx73gjTcdq7Hvk_0N_w@mail.gmail.com> <CADWvR2jUCu64Kh0jStQHj1Jhe59btSoYEMG5QKBanuz=Eaaciw@mail.gmail.com> <CADWvR2gQug_vvp6URn5_mi74GBAEph0nqWmRNgfeLn=cCqAj0g@mail.gmail.com> <517E9782.2050701@wenks.ch> <CAJ-Vmo=50vH0zQwq4fc_mo-57ong32QZS2Z2XtZP6T3EkkWPSg@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hello Adrian On 29.04.2013 19:51, Adrian Chadd wrote: > Hm, can you double check the port configuration? is it somehow getting > the number of stop bits wrong or something? What about flow control? I did not change anything, I even did not set anything special back with FreeBSD 7.4 during the setup of ntpd for the DCF77 mouseCLOCK. Here the settings of the serial (sorry for the line wrapping): root@superman:~ # stty -a -f /dev/refclock-0 speed 50 baud; 0 rows; 0 columns; lflags: -icanon -isig -iexten -echo -echoe -echok -echoke -echonl -echoctl -echoprt -altwerase -noflsh -tostop -flusho -pendin -nokerninfo -extproc iflags: -istrip -icrnl -inlcr -igncr -ixon -ixoff -ixany -imaxbel -ignbrk -brkint -inpck ignpar -parmrk oflags: -opost -onlcr -ocrnl tab0 -onocr -onlret cflags: cread cs8 -parenb -parodd -hupcl clocal -cstopb -crtscts -dsrflow -dtrflow -mdmbuf cchars: discard = <undef>; dsusp = <undef>; eof = <undef>; eol = <undef>; eol2 = <undef>; erase = <undef>; erase2 = <undef>; intr = <undef>; kill = <undef>; lnext = <undef>; min = 1; quit = <undef>; reprint = <undef>; start = <undef>; status = <undef>; stop = <undef>; susp = <undef>; time = 0; werase = <undef>; root@superman:~ # ls -l /dev/refclock-0 lrwxr-xr-x 1 root wheel 5 Apr 29 17:05 /dev/refclock-0@ -> cuau1 root@superman:~ # > Are there overflow/underflow counters with the uart driver? I wonder > if you're hitting issues there. Is there anything I can do to debug? PS: No need to use "reply all", reply only to the list is perfect, as I do filter e-mails based on the "List-Id" header line. bye Fabian
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?517EB559.3060200>