Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 20 Mar 2015 23:19:27 +0100
From:      Anders Bolt-Evensen <andersbo87@icloud.com>
To:        Adrian Chadd <adrian@freebsd.org>, freebsd-current@freebsd.org
Subject:   Re: Atheros AR9460 and Acer Aspire V17 Nitro on FreeBSD 11 not working
Message-ID:  <550C9CEF.4040302@icloud.com>
In-Reply-To: <CAJ-VmokPfyR1mkTX5S6yOTDgEDTSFYm11eCgVZPg9vY0if=8dA@mail.gmail.com>
References:  <550C505F.2030809@icloud.com> <CAJ-VmokaBjaPyFy5HcRrTTKaT%2BbAJ8yiObdsiyk22k2po3iOAA@mail.gmail.com> <CADGo8CWiWvDQpCGjRhQsQAPwf2gcZW19jjNjQJ72vbYcaGaRhw@mail.gmail.com> <CAJ-VmokPfyR1mkTX5S6yOTDgEDTSFYm11eCgVZPg9vY0if=8dA@mail.gmail.com>

next in thread | previous in thread | raw e-mail | index | archive | help

IEEE_80211_DEBUG is compiled into the kernel.
When I ran "wlandebug +scan", I got the following output:
net.wlan.0.debug: 0x0 => 0x200000
Then I ran "ifconfig wlan0 up" and then "ifconfig wlan0 scan".
The scan now took a few seconds, but still nothing shows up.
Then I took a look at dmesg -a which was now filled with a loop of the 
following messages:

wlan0: ieee80211_start_scan_locked: active scan, duration 2147483647 
mindwell 0 maxdwell 0, desired mode auto, append, nojoin, once
wlan0: scan set 1g, 6g, 11g, 7g, 13g, 52a, 56a, 60a, 64a, 36a, 40a, 44a, 
48a, 2g, 3g, 4g, 5g, 8g, 9g, 10g, 12g, 149a, 153a, 157a, 161a, 165a, 
100a, 104a, 108a, 112a, 116a, 120a, 124a, 128a, 132a, 136a, 140a dwell 
min 20ms max 200ms
wlan0: scan_task: loop start; scandone=0
wlan0: scan_task: chan 140a ->   1g [active, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_task: waiting
wlan0: scan_task: loop start; scandone=0
wlan0: scan_task: chan   1g ->   6g [active, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_task: waiting
wlan0: scan_task: loop start; scandone=0
wlan0: scan_task: chan   6g ->  11g [active, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_task: waiting
wlan0: scan_task: loop start; scandone=0
wlan0: scan_task: chan  11g ->   7g [active, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_task: waiting
wlan0: scan_task: loop start; scandone=0
wlan0: scan_task: chan   7g ->  13g [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_task: waiting
wlan0: scan_task: loop start; scandone=0
wlan0: scan_task: chan  13g ->  52a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_task: waiting
wlan0: scan_task: loop start; scandone=0
wlan0: scan_task: chan  52a ->  56a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_task: waiting
wlan0: scan_task: loop start; scandone=0
wlan0: scan_task: chan  56a ->  60a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_task: waiting
wlan0: scan_task: loop start; scandone=0
wlan0: scan_task: chan  60a ->  64a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_task: waiting
wlan0: scan_task: loop start; scandone=0
wlan0: scan_task: chan  64a ->  36a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_task: waiting
wlan0: scan_task: loop start; scandone=0
wlan0: scan_task: chan  36a ->  40a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_task: waiting
wlan0: scan_task: loop start; scandone=0
wlan0: scan_task: chan  40a ->  44a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_task: waiting
wlan0: scan_task: loop start; scandone=0
wlan0: scan_task: chan  44a ->  48a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_task: waiting
wlan0: scan_task: loop start; scandone=0
wlan0: scan_task: chan  48a ->   2g [active, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_task: waiting
wlan0: scan_task: loop start; scandone=0
wlan0: scan_task: chan   2g ->   3g [active, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_task: waiting
wlan0: scan_task: loop start; scandone=0
wlan0: scan_task: chan   3g ->   4g [active, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_task: waiting
wlan0: scan_task: loop start; scandone=0
wlan0: scan_task: chan   4g ->   5g [active, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_task: waiting
wlan0: scan_task: loop start; scandone=0
wlan0: scan_task: chan   5g ->   8g [active, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_task: waiting
wlan0: scan_task: loop start; scandone=0
wlan0: scan_task: chan   8g ->   9g [active, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_task: waiting
wlan0: scan_task: loop start; scandone=0
wlan0: scan_task: chan   9g ->  10g [active, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_task: waiting
wlan0: scan_task: loop start; scandone=0
wlan0: scan_task: chan  10g ->  12g [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_task: waiting
wlan0: scan_task: loop start; scandone=0
wlan0: scan_task: chan  12g -> 149a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_task: waiting
wlan0: scan_task: loop start; scandone=0
wlan0: scan_task: chan 149a -> 153a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_task: waiting
wlan0: scan_task: loop start; scandone=0
wlan0: scan_task: chan 153a -> 157a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_task: waiting
wlan0: scan_task: loop start; scandone=0
wlan0: scan_task: chan 157a -> 161a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_task: waiting
wlan0: scan_task: loop start; scandone=0
wlan0: scan_task: chan 161a -> 165a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_task: waiting
wlan0: scan_task: loop start; scandone=0
wlan0: scan_task: chan 165a -> 100a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_task: waiting
wlan0: scan_task: loop start; scandone=0
wlan0: scan_task: chan 100a -> 104a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_task: waiting
wlan0: scan_task: loop start; scandone=0
wlan0: scan_task: chan 104a -> 108a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_task: waiting
wlan0: scan_task: loop start; scandone=0
wlan0: scan_task: chan 108a -> 112a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_task: waiting
wlan0: scan_task: loop start; scandone=0
wlan0: scan_task: chan 112a -> 116a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_task: waiting
wlan0: scan_task: loop start; scandone=0
wlan0: scan_task: chan 116a -> 120a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_task: waiting
wlan0: scan_task: loop start; scandone=0
wlan0: scan_task: chan 120a -> 124a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_task: waiting
wlan0: scan_task: loop start; scandone=0
wlan0: scan_task: chan 124a -> 128a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_task: waiting
wlan0: scan_task: loop start; scandone=0
wlan0: scan_task: chan 128a -> 132a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_task: waiting
wlan0: scan_task: loop start; scandone=0
wlan0: scan_task: chan 132a -> 136a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_task: waiting
wlan0: scan_task: loop start; scandone=0
wlan0: scan_task: chan 136a -> 140a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_task: waiting
wlan0: scan_task: loop start; scandone=1
wlan0: scan_task: out
wlan0: sta_pick_bss: no scan candidate
wlan0: scan_task: done, [ticks 2147275107, dwell min 20 scanend 4294748797]
wlan0: notify scan done
wlan0: ieee80211_scanreq: flags 0x20052 duration 0x7fffffff mindwell 0 
maxdwell 0 nssid 1
wlan0: ieee80211_check_scan: active scan, append, nojoin, once
wlan0: sta_pick_bss: no scan candidate

The system kept on printing these messages until I rebooted this machine 
back to Windows (in order to write this reply).

On 3/20/2015 8:02 PM, Adrian Chadd wrote:
> compile in IEEE80211_DEBUG, then "wlandebug +scan", then do the scan.
>
> I wonder if you're hitting some scan bug where the sheer amount of
> traffic going on is causing problems.
>
> Also, seeing RX'ed frames at -130dB is .. oddly wrong for this NIC.
> Something odd is going on.
>
>
> -a
>
>
> On 20 March 2015 at 11:21, Miguel Clara <miguelmclara@gmail.com> wrote:
>> On Fri, Mar 20, 2015 at 6:01 PM, Adrian Chadd <adrian@freebsd.org> wrote:
>>> On 20 March 2015 at 09:52, Anders Bolt-Evensen <andersbo87@icloud.com>
>>> wrote:
>>>> Hello!
>>>>
>>>> Recently I had to buy a new computer as my Mac broke down.
>>>> I ended up with an Acer Aspire V17 Nitro, which, except for a couple of
>>>> problems, is all good.
>>>> One of the problems is that wifi does not work. The wifi driver is an
>>>> Atheros AR9460.
>>>> The problem is that when I attempt to scan for my wireless network,
>>>> nothing
>>>> shows up at all.
>>>> On my previous computer, where I used an external Atheros card,
>>>> everything
>>>> worked well.
>>>> Could the following line from dmesg be a symptom of my problems?
>>>> "ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000"
>>>>
>>>> I'm using FreeBSD 11-CURRENT with sources updated today.
>>>
>>> What else does it log?
>>
>> I have this same card on a acer s3 (utltrabook)
>>
>> @adrian this is the one I reported the performance issues but now seems to
>> be working ok.
>>
>> For the record this is with --> r280273
>>
>> commit d7efe7e99e68d52fa754f4e935814c492d818ece
>> Author: pfg <pfg@FreeBSD.org>
>> Date:   Fri Mar 20 01:07:48 2015 +0000
>>
>>      Permit multiple arguments for the nonnull attribute.
>>
>>      This is very useful for non-trivial functions and doesn't
>>      affect existing uses.
>>
>>      MFC after:  5 days
>>
>> Notes:
>>      svn path=/head/; revision=280273
>>
>>
>> I'm noticing something wron with "ifconfig scan" too, it listed fine as a
>> normal user, but that's not really re-scanning...
>>
>> % ifconfig wlan0 scan
>> SSID/MESH ID    BSSID              CHAN RATE   S:N     INT CAPS
>> ****       *:1c:68    1   54M -93:-96  100 EP   RSN HTCAP WPS WPA WME
>> ****       *:13:c0    6   54M -80:-96  100 EP   RSN HTCAP WPS WME
>> ****       *:e2:0c    6   54M -83:-96  100 EP   RSN HTCAP WME
>> ****      *:f7:8c    6   54M -109:-96  100 EP   RSN HTCAP WPS WPA WME
>> ****       *:4a:12   11   54M -91:-96  100 EP   RSN HTCAP WPS WPA WME
>> ****      *:13:c4   48   54M -80:-96  100 EP   RSN HTCAP WME
>>
>> Trying with sudo gets in a hanged state...
>>
>> [user@host:/usr/src ]% sudo ifconfig wlan0 scan
>> load: 0.17  cmd: ifconfig 11320 [sbwait] 35.72r 0.00u 0.00s 0% 2132k
>> load: 0.17  cmd: ifconfig 11320 [sbwait] 36.20r 0.00u 0.00s 0% 2132k
>> load: 0.19  cmd: ifconfig 11320 [sbwait] 187.79r 0.00u 0.00s 0% 2132k
>> load: 0.19  cmd: ifconfig 11320 [sbwait] 187.94r 0.00u 0.00s 0% 2132k
>> load: 0.19  cmd: ifconfig 11320 [sbwait] 188.08r 0.00u 0.00s 0% 2132k
>>
>> ^C
>>
>> but after the ^C as a normal user again and:
>> ifconfig wlan0 scan
>> SSID/MESH ID    BSSID              CHAN RATE   S:N     INT CAPS
>> *****       *:1c:68    1   54M -94:-96  100 EP   RSN HTCAP WPS WPA WME
>> *****       *:13:c0    6   54M -80:-96  100 EP   RSN HTCAP WPS WME
>> *****       *:e2:0c    6   54M -83:-96  100 EP   RSN HTCAP WME
>> *****       *:f7:8c    6   54M -130:-96  100 EP   RSN HTCAP WPS WPA WME
>> *****       *:4a:12    1   54M -91:-96  100 EP   RSN HTCAP WPS WPA WME
>> *****       *:13:c4   48   54M -80:-96  100 EP   RSN HTCAP WME
>> ***** ...   *:99:01    6   54M -96:-96  100 E  <------- This is new so it
>> re-scanned
>>
>>
>> I see nothing in dmesg
>>
>>>
>>> -adrian
>>> _______________________________________________
>>> freebsd-current@freebsd.org mailing list
>>> http://lists.freebsd.org/mailman/listinfo/freebsd-current
>>> To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"
>>
> _______________________________________________
> freebsd-current@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?550C9CEF.4040302>