Date: Thu, 29 Sep 2016 15:46:54 +0900 (JST) From: Mori Hiroki <yamori813@yahoo.co.jp> To: "freebsd-mips@freebsd.org" <freebsd-mips@freebsd.org> Subject: Solve: AR7161 USB Message-ID: <181104.30133.qm@web101710.mail.ssk.yahoo.co.jp> In-Reply-To: <CAJ-VmokSNP%2BZr5s14TzvkNMukLHRFEK9p2jEpfjB=X5N4u1=Sw@mail.gmail.com> References: <379174.95890.qm@web101716.mail.ssk.yahoo.co.jp> <063ff05f-d464-823a-495c-abb800dfdaf5@freebsd.org> <105245.8987.qm@web101701.mail.ssk.yahoo.co.jp> <CAJ-VmokSNP%2BZr5s14TzvkNMukLHRFEK9p2jEpfjB=X5N4u1=Sw@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi Thanks for your advice. I can use USB on AR7161. # gpioctl 2 1 # usbconfig ugen0.1: <OHCI root HUB Atheros> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr= SAVE (0mA) ugen1.1: <EHCI root HUB Atheros> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr =SAVE (0mA) ugen0.2: <USB IR REMOCON Bit Trade One LTD.> at usbus0, cfg=0 md=HOST spd=FULL ( 12Mbps) pwr=ON (100mA) Thanks. Hiroki Mori ----- Original Message ----- > From: Adrian Chadd <adrian.chadd@gmail.com> > To: Mori Hiroki <yamori813@yahoo.co.jp> > Cc: "freebsd-mips@freebsd.org" <freebsd-mips@freebsd.org> > Date: 2016/9/29, Thu 13:21 > Subject: Re: AR7161 USB > > it could be something to do with port or phy power. check the default > gpio settings for your board; some don't enable usb phy power. > > > -a > > > On 28 September 2016 at 20:51, Mori Hiroki <yamori813@yahoo.co.jp> wrote: >> Hi. >> >> on WZR-HP-G300NH(AR9132) OK >> >> >> >> # usbconfig >> ugen0.1: <EHCI root HUB Atheros> at usbus0, cfg=0 md=HOST spd=HIGH > (480Mbps) pwr >> =SAVE (0mA) >> ugen0.2: <USB IR REMOCON Bit Trade One LTD.> at usbus0, cfg=0 md=HOST > spd=FULL ( >> 12Mbps) pwr=ON (100mA) >> # >> >> >> on WZR-HP-AG300H(AR7161) NG >> >> # usbconfig >> ugen0.1: <OHCI root HUB Atheros> at usbus0, cfg=0 md=HOST spd=FULL > (12Mbps) pwr= >> SAVE (0mA) >> ugen1.1: <EHCI root HUB Atheros> at usbus1, cfg=0 md=HOST spd=HIGH > (480Mbps) pwr >> =SAVE (0mA) >> >> I use ZRouter on build. I check hints file. I seem same as >> sys/mips/conf/AP96.hints. >> >> Thanks >> >> Hiroki Mori >> >> >> >> ----- Original Message ----- >>> From: Sean Bruno <sbruno@freebsd.org> >>> To: freebsd-mips@freebsd.org >>> Cc: >>> Date: 2016/9/27, Tue 23:10 >>> Subject: Re: AR7161 USB >>> >>> >>> >>> On 09/27/16 04:02, Mori Hiroki wrote: >>>> Hi. >>>> >>>> I try to use AR7161 target(WZR-HP-AG300H) on head today. >>>> But I can't use USB this target. Device is probe on boot but > USB device >>>> insert not detect device. >>>> >>>> Any one use this ? >>>> >>>> Regards. >>>> >>>> Hiroki Mori >>> >>> Is umass.ko loaded? (I assume you are using a USB storage device). >>> >>> sean >>> >> _______________________________________________ >> freebsd-mips@freebsd.org mailing list >> https://lists.freebsd.org/mailman/listinfo/freebsd-mips >> To unsubscribe, send any mail to > "freebsd-mips-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?181104.30133.qm>