Date: Fri, 22 Feb 2013 07:57:18 +0100 From: Werner Thie <werner@thieprojects.ch> To: Alie Tan <alie@affle.com> Cc: Tim Kientzle <tim@kientzle.com>, "freebsd-arm@freebsd.org" <freebsd-arm@freebsd.org> Subject: Re: Unable to copy DTB into module directory Message-ID: <512716CE.7050600@thieprojects.ch> In-Reply-To: <CANuCnH9owQNSosUMZDt0vw8%2BQS1HWNOXDWEQ7UobqO9Y7hwJCw@mail.gmail.com> References: <CANuCnH_4dxzBfVjxgX2FOtVKYm9BM0ZwdeDvp5-xPX8c5ggzHA@mail.gmail.com> <3A8BA2BC-6707-4309-B6E3-5B15712ED67D@kientzle.com> <FC5D35F7-0057-4EDE-B0EB-36492476D929@kientzle.com> <CANuCnH9owQNSosUMZDt0vw8%2BQS1HWNOXDWEQ7UobqO9Y7hwJCw@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On 2/22/13 7:47 AM, Alie Tan wrote: > On Fri, Feb 22, 2013 at 2:17 PM, Tim Kientzle <tim@kientzle.com> wrote: > >> >> On Feb 21, 2013, at 10:07 PM, Tim Kientzle wrote: >> >>> On Feb 21, 2013, at 9:50 PM, Alie Tan wrote: >>>> >>>> I just built RasPi image and keeps getting this message: >>>> >>>> "unable to copy DTB into module directory" >>>> >>>> then the raspi reboot again and again. >>> >>> Try backing out r247045 and see if that fixes >>> it for you. >>> >>> Also try breaking into the U-Boot prompt >>> and entering >> >> Sorry, left out some steps here. (To clarify, this is a separate >> experiment to be done with an image that includes >> r247045). The instructions should say: >> >> 1) Remove the "fdt addr 0x100" command from loader.rc >> >> 2) Early in boot, break to the U-Boot prompt (hit any key during the >> 3-second countdown) >> > I can't even hit any key on my keyboard. What to do now? Are you on USB/serial console? 256MB RPi? No reset button? If so, it's very tricky to bring cu up and sneak in a keystroke (not ENTER though) Fiddling with the power and cu usually takes a few attempts for me Werner
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?512716CE.7050600>