Date: Thu, 29 Sep 2005 08:42:09 -0600 (MDT) From: "M. Warner Losh" <imp@bsdimp.com> To: jens.rehsack.ext@siemensvdo.com Cc: jon@FreeBSD.org, current@FreeBSD.org Subject: Re: Problems with Acer Travelmate & PC-Card interface Message-ID: <20050929.084209.112638136.imp@bsdimp.com> In-Reply-To: <CE3682EF98A64140B2BF376C39461E0A02F817@krbdf7ma.ww011.siemens.net> References: <CE3682EF98A64140B2BF376C39461E0A02F817@krbdf7ma.ww011.siemens.net>
next in thread | previous in thread | raw e-mail | index | archive | help
In message: <CE3682EF98A64140B2BF376C39461E0A02F817@krbdf7ma.ww011.siemens.net>
"Rehsack Jens \(ext\)" <jens.rehsack.ext@siemensvdo.com> writes:
: From: M. Warner Losh [mailto:imp@bsdimp.com]
: Sent: Thursday, September 29, 2005 5:41 AM
:
: > In message:
: <CE3682EF98A64140B2BF376C39461E0A02F7EB@krbdf7ma.ww011.siemens.net>
: > "Rehsack Jens \(ext\)" <jens.rehsack.ext@siemensvdo.com>
: writes:
: > : Ok - to the question. I've tried to get my W-Lan card running
: (ath(4)
: > : driver and ran successful in my old notebook), but it wont be
: > : recognized.
: >
: > Usually you just include 'cbb', 'pccard', 'cardbus' and 'ath' in the
: > kernel (and a few others for ath), and it works.
:
: I've cut out the relevant lines from my kernel configuration and attach
: them.
: I think, it's complete (for getting an ath(4) card via cardbus
: running)...
Not sure. It looks like it should be good.
: > : Throwing a look into /etc/rc.d/pccard shows me, if no /dev/card0 is
: > : available, the pccardd and pccardc wont be started. And really -
: there
: > : is no /dev/card0.
: >
: > That's good. There's no pccardd anymore.
:
: But a pccardc is there - and it's not started either.
pccardc and pccardd are still built, but aren't used (although pccard
dumpcisfile will be shortly).
: > You'll need to turn on pccard debugging.
:
: How do I do this? In the sys/conf/NOTES there is nothing to find 'bout
: pccard debugging, neither in pccard(4) nor in pccbb(4).
Should be added.
hw.pccard.cis_debug=1
hw.pccard.debug=1
hw.cbb.debug=1
hw.cardbus.cis_debug=1
hw.cardbus.debug=1
should do the trick.
: > The bridge in your laptop is
: > known to the driver (which surprises me!), but looks like it might be
: > TI6411-class (which should be in the tables, I'll double check).
:
: I don't think so. It's detected as a generic cardbus (yenta compliant)
: chipset. But if you want me to test sth. out - feel free to contact me.
OK. I'll investigate why it isn't picking things up.
Warner
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20050929.084209.112638136.imp>