Date: Wed, 27 Aug 2003 09:01:30 -0300 From: "Vitor de Matos Carvalho" <listas@softinfo.com.br> To: <FreeBSD-Stable@FreeBSD.org> Subject: Re: page faults under last eve's stable Message-ID: <030d01c36c92$f3c47770$020aa8c0@acaraje> References: <E19rwmJ-000KLq-VP@roam.psg.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi, If accepted you an advice, always that you to give one cvsup, waits = about 15 the 20 days giving make world, because I find that to the times = version STABLE is UNSTABLE, or then uses version - RELEASE (RELENG_4_8), = therefore this yes that he seems to be a version STABLE, therefore = nobody moves, only place corrections of problems.=20 Here I will go to make this, cvsup today, wait about 20 days giving make = world. Regards, --------------------------------------------------- Vitor de Matos Carvalho - #5602098 Softinfo Network Administrator Salvador - Bahia - Brazil FreeBSD: The silent Workhorse ----- Original Message -----=20 From: "Randy Bush" <randy@psg.com> To: "FreeBSD Stable" <freebsd-stable@freebsd.org> Sent: Wednesday, August 27, 2003 6:39 AM Subject: page faults under last eve's stable > [ cvsupping again now ] >=20 > Fatal trap 12: page fault while in kernel mode > fault virtual address =3D3D 0x13 > fault code =3D3D supervisor read, page not present > instruction pointer =3D3D 0x8:0xc0240140 > stack pointer =3D3D 0x10:0xcd360e10 > frame pointer =3D3D 0x10:0xcd360e18 > code segment =3D3D base 0x0, limit 0xfffff, type 0x1b > =3D3D DPL 0, pres 1, def32 1, gran 1 > processor eflags =3D3D interrupt enabled, resume, IOPL =3D3D 0 > current process =3D3D 97737 (sh) > interrupt mask =3D3D net bio cam=3D20 > trap number =3D3D 12 > panic: page fault >=20 > syncing disks... 103 22 20 18 18 13 13 9 8 8 8 8 8 8 8 24 7 7 7 7 7 7 = 7=3D > 13 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7=3D20 > giving up on 7 buffers > Uptime: 5h58m18s >=20 >=20 > Copyright (c) 1992-2003 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, = 1994 > The Regents of the University of California. All rights reserved. > FreeBSD 4.9-PRERELEASE #21: Tue Aug 26 08:53:07 GMT 2003 > root@psg.com:/usr/obj/usr/src/sys/PSG > Timecounter "i8254" frequency 1193182 Hz > CPU: Pentium III/Pentium III Xeon/Celeron (501.14-MHz 686-class CPU) > Origin =3D "GenuineIntel" Id =3D 0x672 Stepping =3D 2 > = Features=3D0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,= CMOV,PAT,PSE36,MMX,FXSR,SSE> > real memory =3D 268423168 (262132K bytes) > avail memory =3D 257744896 (251704K bytes) > Preloaded elf kernel "kernel" at 0xc0377000. > Pentium Pro MTRR support enabled > Using $PIR table, 8 entries at 0xc00f0d10 > npx0: <math processor> on motherboard > npx0: INT 16 interface > pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard > pci0: <PCI bus> on pcib0 > pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on = pci0 > pci1: <PCI bus> on pcib1 > isab0: <Intel 82371AB PCI to ISA bridge> at device 4.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <Intel PIIX4 ATA33 controller> port 0xd800-0xd80f at device = 4.1 on pci0 > ata0: at 0x1f0 irq 14 on atapci0 > ata1: at 0x170 irq 15 on atapci0 > pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 4.2 irq 10 > chip1: <Intel 82371AB Power management controller> port 0xe800-0xe80f = at device 4.3 on pci0 > ahc0: <Adaptec aic7890/91 Ultra2 SCSI adapter> port 0xd000-0xd0ff mem = 0xe2000000-0xe2000fff irq 10 at device 6.0 on pci0 > aic7890/91: Ultra2 Wide Channel A, SCSI Id=3D7, 32/253 SCBs > fxp0: <Intel 82558 Pro/100 Ethernet> port 0xb800-0xb81f mem = 0xe1800000-0xe18fffff,0xe3000000-0xe3000fff irq 11 at device 7.0 on pci0 > fxp0: Ethernet address 00:e0:18:98:63:22 > inphy0: <i82555 10/100 media interface> on miibus0 > inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > cy0: <Cyclades Cyclom-Y Serial Adapter> port 0xb400-0xb47f mem = 0xe0800000-0xe0803fff,0xe1000000-0xe100007f irq 11 at device 10.0 on = pci0 > cy0: driver is using old-style compatibility shims > orm0: <Option ROM> at iomem 0xc8000-0xcd7ff on isa0 > pmtimer0 on isa0 > fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on = isa0 > fdc0: FIFO enabled, 8 bytes threshold > atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > sio0: type 16550A, console > sio1 at port 0x2f8-0x2ff irq 3 on isa0 > sio1: type 16550A > ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 > ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode > ppc0: FIFO with 16/16/9 bytes threshold > IP packet filtering initialized, divert disabled, rule-based = forwarding enabled, default to deny, unlimited logging > IPsec: Initialized Security Association Processing. > ad0: 78167MB <Maxtor 4W080H6> [158816/16/63] at ata0-master UDMA33 > Waiting 5 seconds for SCSI devices to settle > Mounting root from ufs:/dev/da0s1a > da0 at ahc0 bus 0 target 0 lun 0 > da0: <IBM DDYS-T36950N S96H> Fixed Direct Access SCSI-3 device=20 > da0: 80.000MB/s transfers (40.000MHz, offset 63, 16bit), Tagged = Queueing Enabled > da0: 35003MB (71687340 512 byte sectors: 255H 63S/T 4462C) > WARNING: / was not properly dismounted >=20 > _______________________________________________ > freebsd-stable@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to = "freebsd-stable-unsubscribe@freebsd.org" >=20 >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?030d01c36c92$f3c47770$020aa8c0>